Rumman

this one

gskill ripjaws 5

Thanks. I am planning to buy one 16 GB. Is it okay if I run 1x8 GB + 1x16 B at 3200Mhz? My one RAM stick are 2400MHz and another 3200MHz. Two 8 GB sticks.

R5 3600x B450 S2H Mobo RAM running at 2400Mhz (8x2=16GB) SSD Boot drive + 2 other ssd and + HDD PSU 450Watt. Antec Neo Eco 2 (Bronze Certified)

Problem is micro stuttering in some games. Also not smooth frame time.

Will I brick my card if update the vBios with the same version file? Currently facing some problem and hopping to overcome by bios flashing.

If I buy a B550 MOBO, will it then work?

CSM is already disabled

I am running an R5 3600x with Gigabyte B450M S2H. Pairing with a RX 6600xt which runs at PCIe 3.0 x8 instead of PCIe 4.0 x8. Can I run my GPU at PCIe 4.0 x8 with this mobo and CPU? Already updated the BIOS and there is no option of Gen 4 in the bios. What should I do to run at PCIe gen 4?

With my RX 6600xt I cannot use 2 monitors with full satisfaction. With some application, mainly video playback facilities, the drivers are crashing consecutively and the screen goes black. Then I have to restart my PC again. Mostly happens with the Apps Tiktok. Also tried diver reinstallation. Could it be for any probability of GPU Problem or driver issues? Don't happened while using single monitor. (I am using one 144hz monitor and 1 75hz monitor, but never happened while using nvidia GPU previously)

Right. But worried about RAM speed. Should I jump to 3200Mhz from 2400Mhz?

How bad the bottlenecking is when paired up a RX 6600XT with and R5 3600x and 2400Mhz dual kit (8X2) ram sticks?

I recently brought RX 6600XT and using it with two monitor. So, when I config to show 2 monitor (Extended view), the Mem clock speed be always at its height like at 2000mhz. Even I am not doing any thing on my PC. But during single monitor usage, the clocks are normal. What should I do to fix that?

What should be clock speed when the GPU has no stress (RX 6600XT)?

Hum. I am also assuming this. the GPU clock also gets too low on idle like 0.0 to 5.0 Mhz. Should I give it for warranty?

2 days ago I brought the Power color hellhound RX 6600xt. Now the GPU behaving something like this- 1. Frames are drooping constantly in some games like Fortnite, Forza Horizon, RDR 2, etc. Also drops in some stress test. I attached a screen short for reference. 2. driver ver. 22.5.1 is installed but in some games it shows to update the driver to 22.8.`~ something like that. 3. One time the driver maybe get crushed and the screen went to something like zigg zag and broken glass. (though I tried to overclock the GPU from the Adrenaline software) Should I return it to the seller? Or should I change GPU? or is it a matter to worry? (yes I am worried)

Should I buy power color RX 6600 used for $240 approx.? In my my country GPU prices is kind of sucks, buying a new one cost me like $380. Currently using 1060 3 GB. Is it be wise to wait for next gen GPU? I just want more frame as my 1060 3gb does not feed much frames to my 144hz monitor.

Thanks

It has WAN and multiple LAN port but not Gigabit LAN port I mean.

I am currently using a Netgear router AC750 standard. But now I want to connect my PC through a gigabit LAN port. Though I don't want to switch my router. Can It be possible and reasonable to buy an ONU that has 2 LAN output and connect my PC directly with ONU. In that way could I establish a Gigabit connection with the ONU? Actually, I don't want to switch from the Netgear router for its stability. And also buying a new Netgear router with a gigabit port will cost more that I want to spend now. Though primarily I consider buying TP-Link Archar C6. Or Should I buy TP-Link Archar C6 dumping the old router Netgear AC750?

Does a line interactive UPS or an UPS with AVR facility last longer then their counter parts (i.e. offline UPS, UPS with non AVR)? 2 options available to me- 1. Offline UPS (Non-AVR) UPS buy with higher VA. OR 2. Line interactive UPS (with AVR facility) but lower VA UPS. Which to consider?

I live in Bangladesh and here the voltage output is 220v. Does it works?

240 v

Can someone tell me the difference between these two UPS from APC. One cost significantly higher then the other. Should I go with the cheaper one? APC Back-UPS 650VA, 120V, 8 NEMA outlets (4 surge) (https://www.se.com/ww/en/product/BE650G1-CN/apc-backups-650va-120v-8-nema-outlets-4-surge/) VS APC Easy UPS BV 650VA, 230V, AVR, 4 IEC outlets (https://www.se.com/ww/en/product/BV650-IN/apc-easy-ups-bv-650va-230v-avr-4-iec-outlets/) First one is 94 bucks and 2nd one is 54 bucks.

Hi, Currently I am facing power outage in my area and probably will last for a while. In my country there are my Chinese branded UPS and also some good branded UPS. So, I am now in a dilemma to choose between those brands. I am mentioning some brand name of UPS, please help me to choose a reliable one. Also Know that APC is one of the reliable brand name in the world of UPS. But it cost me more then 2x price of other brand UPS (like Apollo, Santak). Now if I want to buy APC Back UPS 650VA, it cost me ~94 dollar. But with in this price I can buy other branded UPS (Power Guard, Santak) 1500VA. So, with ~94 bucks; should I buy APC Back UPS 650VA or Power Guard 1500VA? Other brand name of the UPS- -Maxgreen - Santak - Power Pac - Power Guard - Apollo - Digital X These are the brands' of UPS found in my country alone with APC.