Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

SamVI

Member
  • Content Count

    8
  • Joined

  • Last visited

Awards


This user doesn't have any awards

About SamVI

  • Title
    Newbie
  1. I tried connecting the pump to the aio_pump and the pump's fan to cpu_fan, now I don't get an error, and it's detecting cpu_fan but it's running around 1000 rpm and rise with the cpu temps, and the aio pump is now not detecting It says in my motherboard manual "Connect the fan of your water cooling kit to the AIO_PUMP connector.", but it doesn't say where to connect the pump itself. In my H60 manual it says "Connect the pump power connector to any avaiable 3-pin or 4-pin fan on the motherboard." So should I try putting the pump in one of the CHA_fan ? EDIT: I tried connecting the pump to one of the CHA_fan and the pump's fan to the aio_pump, but still same result, aio_pump at 2k rpm and cpu_fan not detecting and CHA_fan not detecting and cpu temps just rise.
  2. I have just build a new pc with the following specs: Asus z370-p Intel i7-8700k Corsair H60 Asus GTX1080 NZXT H440 Samsung 960EVO 250GB WD 1TB Black Corsair TX850M And when I start it up it says "cpu fan error" and I press F1 to run, then when I get into bios my cpu fan is not detecting (N/A) but my aio pump is running at 1800-1900 rpm. My cpu temperature steadily rise, and continues to rise after hitting 68 and I turn it off, of course. My Corsair H60 is connected to cpu_fan on the motherboard and it's fan is connected to aio_pump, I can see the fan running and it's deteced in bios, but I don't know if the pump is running, and I don't think it is, since it isn't detected and cpu temps rise steadily. Should I connect something differently? or is my cooler broken? or is it some setting I have to change? I appreciate any help I know the picture is really bad and the screen isn't set right but just ignore it :), you can't really see the cpu temps neither but within a few minutes it will have risen from 30 to like 60 degrees celcius.
  3. if any microatx case should work, wouldn't the case it already has work? since the case it already has is: Height: 36.7 cm (14.48 inches) unpacked Width: 17.5 cm (6.91 inches) unpacked Length: 38.9 cm (15.35 inches) unpacked and fractal core 1100 is: 17.5 cm x 41 cm x 35.8 cm
  4. I have a pc that im going to upgrade gpu on. I was thinking ASUS GeForce® GTX 1050TI-O4G-GAMING ROG STRIX, because it's cheap and has decent performance. The problem is Im not sure if gtx 1050ti goes well with joshua-h61-uatx motherboard, as far as I know there is no problem with using 3.0 on a 2.0 motherboard. I also need to upgrade the psu to a 500-600w and a new case. I hope you can help me, thanks in advance pc link: http://support.hp.com/us-en/document/c03843676
  5. I need to get deep freeze off these computers, and I have seen a program called anti deep freeze, that should fix it, but I don't know if it's secure, or I will get virus. pls help, and thanks in advance. http://www.mediafire.com/download/qy58a616bc62qod/ANti+deepfreeze+1+to+7.rar
  6. Thanks, I would also assume that the CPU will keep up with the GPU but its just that it's a i5 3. generation so... I am getting a new case so that won't be a problem
  7. Thanks for the quick reply If not a CX then what ?
  8. This is my current pc: Joshua-H61-uATX Intel Core i5-3350P 8 GB DDR3 - 1600MHz NVIDIA GeForce GT 630 1 TB HDD 300W PSU I was thinking about upgrading my Graphics Card and Power Supply, to a MSI GTX 960 2GB gaming and a Corsair CX600W. 1. Is 600W enough. 2. Will it work considering it's from a GT 630 to a GTX 960. 3. Will the GTX 960 be so powerful compared to my other components, that it won't reach its full potential.
×