VoyexTech
-
Posts
844 -
Joined
-
Last visited
Content Type
Forums
Status Updates
Blogs
Events
Gallery
Downloads
Store Home
Everything posted by VoyexTech
-
Windows doesn't recognize my ehdd as a USB flash drive? Any thoughts?
-
I would use a cd but the people at hp thought that cds were obsolete so I don't have a cd drive
-
Awesome! I don't have a USB stick could I use an external hard drive instead? Or an sd card
-
I can get to bios but I don't have a windows 10 iso with me rn I can make one later though
-
When I boot up my laptop it is in an endless loop of loading at the splash screen. I tried resetting the cmos and inducing an automatic repair screen and it gets stuck on diagnosing your PC. Any idea what this could be? Laptop: HP envy touchsmart m6-n010dx
-
i know it is not a software issue as when i take the threaded rod out and run the motors they both spin together. I will try WD40 and get back to you.
-
the Bed? the issue is coming from the axis with the extruder on it not on the bed
-
Yes but why would you do that?
-
If warranty is an option use it. If not do this:
-
No you can't you need 2 1080's if you want to do that.
-
Splice them together?
-
no need to put it back on just throw it on with tape if you are worried.
-
1080
-
Refund it. also just put it back like it was or the best you can do
-
Yes you could you just need the extra PCIe port. if you plan to add a physx card then yes but if you are just upgrading to the 1080 (no 960 physx) then you should be able to pull it off.
-
on my A8 Prusa i3 3d printer When i raise the extruder up the Z axis and measure at the white mounts then align the right mount will be 1/2 of an inch lower every time i set the Z axis to home. Any ideas? if you are not clear on anything just ask. I am bad at explaining
-
I have a heated bed for it. Thank you for all of your help!
-
Don't have the money so I'll deal with it until I do I guess. AAny more suggestions for things that I can replace later down the road to improve my printer?
-
I belive it is the Anet V1.0
-
Also do I go 12v or 24v for the hotend?
-
Ok thank you any other parts that I should replace on my 3d printer? Suggestions for a better bed?
-
Sorry if I don't really know what I am taking about I don't know much about 3d printers.
-
Ok I can deal with that but will I be able to (for example) switch a direct dive extruder for a bowden extruder?
-
By issues I mean compatibility issues I am willing to calibrate
-
I need to know a few things about 3d printing and if anyone could help me I think you guys could. Printer: Anet A8 Prusa I3 What parts on my 3d printer can I replace without issues? ( I know I can replace the bed and the frame and I belive you can replace the stepper motors. But can I 3d print a better/double extruder?) What parts should I replace and what should I replace to get the best experience? Thanks for taking the time to help!
