inyourmindz

have tryed that but i didnt work

dammit i was look at a wrong thread xD

i already have booted to windows but when i restart it freeze on the logo where i can enter bios, even if i try to enter bios nothing happens and after 2-3 min it goes to bios even tho i havent told it to and the nvme is gone from boot priority

Hello. so i just got my new components and wanted to put it together and starts playing, but if i turn the power off the NVME shows up in bios under boot priority but then when i restart the pc its gone from boot priority. What to do ? Specs. AMD 5600x GTX 1060 16 GB hyperx 3200 Mhz tuf b550 pro 650W Corsair RM gold NVME Kingston (serialnumber) RBUSNS8154P3256GJ

So I just got home with my brand new nvme ssd and I can't get it to work. It does show it in bios but not as a boot priority, I have disabled "launch CSM" and set OS type to other OS and I have cleared secure boot key. Everytime I try to install windows it does the full install and restarts and enter bios again and it's still not a boot option. What to do ???? Ps: I have unplugged all my other drives Specs. Motherboard: Asus Z390-H CPU: i5 9600k RAM: 16 GB Kingston Thx for taking your time to help

So I just got home with my brand new nvme ssd and I can't get it to work. It does show it in bios but not as a boot priority, I have disabled "launch CSM" and set OS type to other OS and I have cleared secure boot key. Everytime I try to install windows it does the full install and restarts and enter bios again and it's still not a boot option. What to do ???? Ps: I have unplugged all my other drives Specs. Motherboard: Asus Z390-H CPU: i5 9600k RAM: 16 GB Kingston Thx for taking your time to help ?

so after going through the cpu and motherboard i noticed that a pin was bend and i put it back in place and now it boots and posts on the screen !!!!:) thx for the help guys !

it gets power becouse the rgb lights up but i dont know if the socket can be broken some how but it's late for me now ill check the socket for dust and ill check the pins to

Done that does not work om starting to Think that the motherboard or cpu is broken:)

i tried to put the ram in other slots and still nothing. ill check the cpu

hello everyone. So i brught a new motherboard (tuf z370 plus-gaming) and a i8400 with 2x8 gb 2666 mhz ballistix sport gaming ram. so i took my computer appart ( i have build computers befor so i know how to take it out and put in the new) after putting in everything i wanted to boot it up to see if it posts. After turning it on it did not post i looked into the computer and noticed that i havent put the grapich cars properly in so i pushed it in without turning of the computer (brainfart). and after 1 and a half hour of trouble shooting still no picture on the screen not from onborad grapich or from the grapich card. i have tryed another powersupply 750w ( dont know the name ) and i cleared cmos with connecting the 2 pins as the manual said and tryed clearing it by taking out the 3v battery. what do i do now ? did i break it cuz of the breafart with the grapich card ? Specs motherboard : Tuf z370 plus-Gaming Cpu : i5 8400 ram : 16gb 2666 mhz ballistix sport gaming memory gpu : asus strix 1060 6 GB Psu 600W LC6600GP2 V2.3 - GREEN POWER if theres anything i missed the please ask THX FOR YOU TIME !!!!!

well i didnt change anything in the router to open it i used the program as i said last

but the worst thing is i dont know if i did the port forward in the router right ?

that cud be a option !

if i try to access with the external ip it just wont connect and the server does not respond to when i fail to connect