ibuildpcswsocks
-
Posts
124 -
Joined
-
Last visited
Content Type
Forums
Status Updates
Blogs
Events
Gallery
Downloads
Store Home
Everything posted by ibuildpcswsocks
-
I have been recently wanting to up my audio quality and I thought about getting this, was wondering if anybody had this or recommended getting something different. If you do have this, what is your setup like? Thanks
-
I bought the 770 250 Ohms Headphones, so I guess this is gonna be an adventure
-
Can you send me a link to the cable?(I know there are plenty different versions of RCA cables) I am sort of confuse on how to image setting this up lol
-
How would I go about doing that?
-
Yes, my bad. The 3.5mm audio jack.
-
is your 990s 250ohms or?
-
They said the amp is 20W per channel according to the spec sheet/information about it on amazon
-
I meant that if I did what you said, I could turn my speakers off and listen to music on youtube through the headphones and then turn on my speaker whenever I am done with the headphones.
-
Speakers are connected to a 3.5mm jack
-
So in short, using the 80ohms headphones with my speakers audio jack work without an amp?
-
Would it still play through my speakers too? I don't wanna have to switch back and forth between sound settings lol
-
would a Behringer HA400 work instead? Really not trying to spend anymore than needed.
-
I would run it through my Focusrite but I haven't figured out how to run system sounds through it, maybe you can't. I don't know.
-
What about my Focusrite Solo? Would those work with it?
-
I meant if my speakers put out enough voltage for it to produce 250ohm
-
So, my ATH-M30x headphones just went out last night. I freaked out at first because I thought it was my speakers acting up but after an hour of unplugging/plugging and turning on and of my speakers, I came to the conclusion that my headset is broken. I need a new pair of headphones heavily focused on mixing music/vocals and sometimes playing games. I've been pacing back and forth with deciding between the beyerdynamic DT 990 PRO 250 ohm or the Audio Technica ATH-M50x. I looked for a couple hours trying to find a answer if 250 Ohms would work on speakers and produce max quality. I have a pair of M-Audio AV42 speakers, I found QnA's on amazon using 250 Ohms for speakers but never saw an answer to where it was recommended; just that they work. If the speakers don't work with it, I have a Focusrite Solo. Would that give me the quality needed for the Headphones? Should I stick with the 80 Ohms? Any help or headphone suggestions is greatly appreciated! Thanks!
-
Ohhhh okay, thank you very much!
-
but doesn't the two pin make it where you plug it in? because I tried using it and it wouldn't work cause of the little "tetris block"
-
Yes!!
-
The model name I dont know, but yes it does have 2PCI-E Cables, but they have a little "tetris block" on the side of it and I don't know what that is used for because I tried putting it into my GPU which is the 6pin and it wouldn't go in.
-
I believe I have a Non Modular Cooler Master 500W 80 Plus (I ordered my PC from Ironside because I needed a new computer overall) sidenote: would this work too? I'm not really trying to spend $30 for a cable ?
-
I am going to be getting a new GPU soon (GTX 1070 8GB) but there is a slight problem. My PSU (Cooler Master 500W) only has 2 6pins, one currently is using my GTX 960. The 1070 is an 8-pin which I don't have, but I have looked around online such as amazon and this one here seems like it will work. Any information on what is best to do is greatly appreciated
-
I just realized i didn't even link you the other shock mount, https://www.amazon.com/dp/B01D42PQCW/?coliid=I2639EUAORVMQP&colid=1F932NN4HNALJ&psc=0&ref_=lv_ov_lig_dp_it
-
I'm seeing that the AT2020 doesn't fit very well, what about this one would work? I think I might be lost, so would the mic stand I linked work with the iso shield and we are looking for shock mounts to attach to the iso?
-
https://www.amazon.com/dp/B00OZ9C9LK/?coliid=I5K5460DZMU3W&colid=1F932NN4HNALJ&psc=1&ref_=lv_ov_lig_dp_it would this work?
