Jump to content

xgn

Member
 View Profile  See their activity

  • Posts

    933

  • Joined

  • Last visited

 Content Type 

Everything posted by xgn

  1. xgn
    Not sure but the oldest video i can find from it is from May 2, 2013 So im thinking around that time maybe late april. Who it was i dont know.
  2. xgn

    deleted

    xgn replied to jimbo4279's topic in Power Supplies

    Raspberry red
  3. xgn
    thanks
  4. xgn
    There is always somewhere to put it. Else you can use something like this. http://shop.aquacomputer.de/product_info.php?language=en&products_id=2918&XTCsid=8l8kqgnbjmr6hbh07heecc3lh80n4jps But if you use a radiator bracket. Make sure you chose a reservoir which fits.
  5. xgn
    Corsair imo. It has magnetic levitating fans. So you get low noise.
  6. xgn
    The gt is the best if you can find them else vardar.
  7. xgn
    You have airbubbles in the system. When bleeding the loop the air needs to come out somewhere. so open the top of the reservoir. You can leave pump running while doing this. You can also speed it up by opening the draining valve attaching a tube to it and hold it at a high point then blow into it. Btw keep the pump off while opening draining valve. guess its obvious but just incase.
  8. xgn
    Im doing that all the time. My pc see it as 4821rpm. There is no drawbacks to it on my loop. Its same pump as OP is going to use.
  9. xgn
    Supports 360/280/240 mm on top or 360/280/240 mm Radiator in front. Yes you can great case
  10. xgn
    Do you have any signals on the hardware? any lights on the mobo ?
  11. xgn
    Did you put on the jumper caps and power connector ?
  12. xgn
    Agree this mobo is from 2016
  13. xgn
    I know but i dont want to risk it. Its not some cheap scrapyard stuff.
  14. xgn
    Thanks i actually find a shop which sell them really cheap. Had to search for jumper on pcb. No wonder it dosent work without jumpers it would fry it
  15. xgn
    Looks correct but the jumper on cmos is set to reset and not direct.
  16. xgn
    No shit sherlock. I own it. Ofcourse i know what it looks like. I just dont understand why there is no jumpers in the box if i need it. I update this thread once i find any.
  17. xgn
    Its called jumper for a reason. One is direct other is clear. The point is it needs to be there if it says so in the manual. I dont know where you buy those things.
  18. xgn
    So i need 3 and 1 optional ? Do you think this is the reason why i get no post ?
  19. xgn
    http://dlcdnet.asus.com/pub/ASUS/mb/LGA2011/X99-E/E11534_X99-E_UM_WEB.pdf?_ga=1.240955587.1918843169.1473541534 Page 27 and 28.
  20. xgn
    I did RMA it and it actually passed the tests !!! Either the shop is lieng or i have bad ram. I dont know what else to do. Are you sure it dosen't need jumpers ? It says so in the manual. But there is no jumpers in the box.
  21. xgn
    asus x99-e
  22. xgn
    cmos,overvolt
  23. xgn
    Im troubleshooting it so i have to try.
  24. xgn
    The board need 2 of these. No wonder it dosen't work. Now i just need to find it somewhere.
  25. xgn
    Hello. I been troubleshooting this motherboard forever. It passed RMA tests. I just noticed there is no Jumper cap on the board. Could this be why? errors. No fans spinning. No beeps. No post. No pleds. There is lights on the motherboard. I know a motherboard NEED jumper to be functional and could even break without it. I just didnt notice there wasen't one until now. Could this be the issue? I dont even know where to buy this thing. Only thing i can think of is to dig in the scrapyard. I tried with jumper from other PC. that didn't help. Maybe i need one which is newer.
×