My old Antec AIO finaly gave out on me and I purchased a corsair H60 from a friend who upgraded to a H100i, I put on the cooler and quickly noticed that I was pushing temps of 66 Celsius at idle and around 85 at full load, some quick googling lead me to the conclusion that I had applied the paste wrong, I removed the paste re-applied after looking at some more guides and i'm sure that there is ample paste and I screwed the CPU plate a bit tighter but there was only a slight difference and I was still pushing 58 degrees at idle, 61-62 with a few chrome tabs open and about the same at load, I added an extra fan to the rad and still saw minuscule difference. That brings me to the thermal paste, the paste I used was cheapo nexxtech heat sink compound stuff because it was the only thing I could get in my town because i'm kinda out in the boonies, I've ordered some Arctic silver 5 from amazon and I'm hoping this will bring the temps down. I can feel the pump working so i'm pretty sure the cooler is not the problem. I'm fairly sure the paste is the problem is the paste but I would like a second opinion. thanks