Xerosss

When using the cik parameters it just stay using radeon drivers instead of AMDGPU one But that's because the 280x is a rebrand of the HD7970GHz edition so it is clearly a SI card, the 290x is actually an CIK chip at seen in the wikipedia: https://en.wikipedia.org/wiki/Radeon_Rx_200_series A GPU implementing Graphics Core Next 2 (Sea Islands) is found on R7 260 (Bonaire), R7 260X (Bonaire XTX), R9 290 (Hawaii Pro), R9 290X (Hawaii XT), and R9 295X2 (Vesuvius) branded products. A GPU implementing Graphics Core Next 1 (Southern Islands) is found on R9 270, 270X, 280, 280X, R7 240, 250, 250X, 265, and R5 240 branded products. that generation was a bit weird in that aspect

Thanks for the great guide. I followed all the steps but i am unable to make it work sadly... I have a AMD 280X so the only difference is that i used "radeon.si_support=0 amdgpu.si_support=1" on the grub part to enable AMDGPU on my system since the GPU is Southern Islands (SI) and i use the last release of manjaro. I get an error BAD_WORK_UNIT when the GPU try to start working on a WU. I will attach the log and a screenshot of the system tab if someone want to take a look and try to help me: Log.txt For now i am only using the CPU.

I understand the 1800x vs 1700 thing, but if i have the money why not? the sane goes for the NVMe drive. The PSU 850w platinum vs gold 750w one is like 20€ difference only thats why i picket it. I don't mind saving o those components but if my Budget is 2500€ i should get something in exchange i think. Can you give me a ryzen and intel alternative close to 2500€. Thx for your help.

Hello i want to renovate my old PC, i have been working for the last 3 years and i have some money to spend 1. Budget & Location Around 2500€ i'm from Spain 2. Aim Gaming and programing( a little bit of everything). and i want to be able to overclock it 3. Monitors No need, i will buy a new one after i have the PC. 4. Peripherals No need. 5. Why are you upgrading? i have been using my PC with FX-8150 and a 280x for too long.. survived thx to OC. No need more storage, i will add a 1Tb SSD when they get cheaper. Already made a Ryzen Build https://es.pcpartpicker.com/list/MVVxwV, Will you change anything? Can you give me an intel alternative? should i wait for the new CPUs? Thx

Thanks. What cases under 50€ do you recommend for this build? all i find in this website look old...

Thanks to all for your help. I asked him if he could build the PC himself but he dont want to, so he need to buy the pc from this website https://www.pccomponentes.com. I have mounted more or less the sane components i have seen here: https://www.pccomponentes.com/configurador/565b52446 CPU: Intel Core i5-6500 3.2Ghz Box (€196.00 ) Motherboard: Gigabyte GA-H110M-S2H Micro ATX LGA1151 Motherboard (€55.00) Memory: Kingston FURY 8GB (1 x 8GB) DDR4-2133 Memory (€45.95 ) Storage: Toshiba SSD Q300 240GB 2.5" (€64.00 ) Storage: Western Digital Caviar Blue 1TB 3.5" 7200RPM Internal Hard Drive (€49.95) Video Card: Gigabyte GeForce GTX 1060 6GB 6GB WINDFORCE OC 6G Video Card (€305.00) Power Supply: Corsair CX550M 550W 80 Plus Bronze (€74.00) Case: Antec GX200 (€31.95) Total: €821,85 I changed the the PSU for one with 550W but i might go back to the 450W but i dont trust its enough power. Do you see any improvement using the components on this website? Thanks.

Hello, im helping a friend to replace his old pc. Can you help me select the rights parts? 1. Budget & Location The budget is around 800€ and we are from spain. 2. Aim General use, gaming(League of legends mostly) and some software development(not much). 3. Monitors No need. 4. Peripherals Windows 10 64bits only 5. Why are you upgrading? His old pc died after 7 years of service and he need a new one. He dont need a case to show up so no need it to look good. Thanks for your help.

Have the G502 resolved the problems with the mouse feet? i hear it could break easily. By the way i actually use a Ozone Ground Level Evo and i want to put the mousepad over it.

Thx for your replies. My Router/AP is the Asus RT-AC66U, i don´t there will be bottleneck on the connection of 300 Mbps Up and 30 Mbps Down. The budget will be anything under 100€. i am interested in the Asus PCE-AC68 found it for 62€

Hello, I actually have a 2 year old Razer Taipan used it a lot and it starting to fell unresponsive. I have been looking in to the Mionix NAOS 7000 ¿Any other preference? O the pad side, I don´t have too much idea on what mouse pad to buy. I have like 35 cm width and 44 cm height free for it. ¿Any recommendation? Thanks.

Hello, I need a PCI express adapter for my main PC, preferred it to be AC because my AP support it. ¿Which one will you recommend? Thanks.

Well aside video editing, I am a software developer, use virtual machines and mount different severs if need to.

I want to upgrade my pc ram and have find this sets of 16 Gb. 1- G.Skill Ripjaws X DDR3 2400 PC3-19200 16GB 2x8GB CL11 for 109 € 2- Kingston HyperX Fury DDR3 1866MHz 16GB 2x8GB CL10 for 105 € 3- Kingston HyperX Fury Black DDR3 1600MHz 16GB 2x8GB CL10 for 105 € Considering the price difference. Will you go for the 2400 one? or Know about a better set? Thanks.

I will go with that but forgot to mention that i need a wireless adapter too. I have seen the TP-LINK TL-WN881ND for 13 €. Any other recomendations? My hone wireless network allow up to AC but AC adapters are too expensive. Thanks again.

Sorry for taking so long to reply but work.. Can you make a build for a budget of 1300 €? Thanks.