mattonfire

It's just how I've always done it using the bios, additionally Ryzen Master doesn't naturally start on startup.

It was a stable overclock in Ryzen master .. it went up to 4500mhz with no adjustments to voltage. So why is there an issue when setting it in the bios.

For some reason my bios won't boot with an overclock I've checked and is safe with Ryzen Master. I just change the core to 4300mhz this has been tested with prime 95 cinebench etc and no issues but once I enable it in the bios it doesn't boot. I have had to replace the CMOS twice now. Chip: Ryzen 3600x Bios: MSI B450A-M PRO MAX

This was fixed by using etcher, thank you. It then required a bios update though followed by enabling virtualization for some reason but once again another issue. It hangs at create volitile files and directories. I thought it'd be due to information bring written to the USB from numerous attempts so I reflashdd it but same issue. This is exhausting ahah.

Rufus, I don't see how I could mess it up. Select device to be the USB. Select the ISO with the select button. Then simply click start, dont think I am messing it up.

Following a guide although it's not even difficulty getting to the install, it wont even boot from the live USB. Hangs at loading due to the message I said earlier, the fact it installs fine on a VM but not on my main PC must indicate the ISO is fine but there must be an issue somewhere in the BIOS.

I am not new to using it, I am very much familiar with Ubuntu but not so much to Arch. Had enough of Windows and the bollocks that it ties with it and Ubuntu just has too much bloat.

Hi, trying to change to Arch. For some reason I am able to install the ISO on a VM suggesting it can't be an issue there. I am unable to install it on my main PC though. Used Rufus to boot to a USB with no issue, boot of USB but then during the installation it hangs at "Rebuild Journal install" assuming this is a BIOS issue, any idea what it is. Specs: Ryzen 3600x AMD 5700 MSI B450M-A Max Pro

Perfect, thank you so much you're a star!

According to the manual that number indicates "OEM DXE initialization codes".

Depends on how savvy you are. I find that I don't require anything else but if you're installing lots of other applications specially from "dodgey" sites then you can install other software. A good one that I've heard of is "malware bytes".

I'd like to get a XLR podcast setup willing to spend around £130 on total components. I assume I'm looking in the wrong place but I'm unable to find audio interfaces to buy. Looked on Amazon and they're all out of stock then go to eBay and they're all ridiculous prices. The beyringer UMC22 should be around £30 yet the cheapest listing on eBay is £120. Could anyone recommend some good budget components for getting into it.

PassMark and UserBenchmark do RAM exclusive tests which run perfectly fine.

I did, works perfectly on the benchmarks I ran; SuperPosition, UserBenchmark etc. I believe I found something of interest, when running a game or so then launching another application like a browser tends to cause more crashes. This wouldn't show up as an issue when benchmarking as I'd let it sit and not open any other applications.

Hi all, I have been having issues with SOMETHING for a while. I typically crash a lot in CSGO with absolutely no error message, the crash can either be full game shut down or some weird window bug where I can see the game but it will not render. This is NOT a issue with the hard drive as that is something I have relplaced recently. I doubt it's an issue with the graphics card. The last three contenders is the motherboard issues with the ram or the CPU having issues with the ram. I have heard that Ryzen can be quite picky about the clock speed. My RAM is now overclocked to 4000mhz, I have heard that RAM over 3200mhz with Ryzen 3000 series can be a tad unpredictable. Is this the case?

I have read a few posts online about this being an issue with the XMP in the BIOS I will attempt to have a fiddle when I am home. It would make sense why the other components are running badly. Such a low ram speed could be bottlenecking as @The Torrent said earlier. Thank you for a useful response and not as per the first two comments I got.

What a childish response. Putting your benchmark score on there too... alright? The CPU passmark score is about 7000 points off of what it states on the website. It may say excellent but it also says performing way below expectations for all three on UserBenchmark (CPU, GPU, RAM respectively); 4th percentile 4th percentile 1st percentile It says Excellent but I am assuming that's referring to the card in general in comparison to all others, it shows the range 82%-98% are the typical values for the card. Mine got 80% meaning it's definitely low. Additionally the memory should be clocked at 3600mhz. Is this an issue with the memory or the application?

I recently bought some parts for a PC and assembled it myself, this isn't the first time. I ran the components through some benchmarks and they all seem sluggish. I wondered if this were drivers so these were uninstalled and reinstalled still issues. These are the passmark scores. Both passmark and UserBenchmark says that my Ram my CPU and my GPU are all performing way below average, this maybe due to my motherboard?

*bump*

CPU: 3600X GPU: Radeon RX 5700 Ram: 16GB DDR4 3600ghz Not specs that should have sort of issue in Counter Strike.

None of my components are hitting any sort of high load, graphics card is around 25% when in CS:GO I am getting 80fps in maps or so. What could be causing this?

hat puts it on the image, I'd like it underneath where the Lorem ipsum is.

I have a carousel but don't know how to change the text as the carousel goes, I want the text to be under all over the images though not inside the individual divs. Got any ideas?

dead

Changed my usage to mysqli instead of mysqli seems to be working better. This worked. Thank you. <?php $con = mysqli_connect("localhost","root","",""); $username = $_POST['user']; $password = $_POST['pass']; $username = stripcslashes($username); $password = stripcslashes($password); $username = mysqli_real_escape_string($con, $username); $password = mysqli_real_escape_string($con, $password); $result = mysqli_query($con,"SELECT * FROM users WHERE username = '$username' and password = '$password'") or die("Failed to Query Database. ".mysqli_error($con)); $row = mysqli_fetch_array($result); if ($row['username'] == $username && $row['password'] == $password ){ echo "Login Successful. Welcome, ".$row['username']; } else { echo "Login Failed. Please try again."; } ?> *EDIT* Found it. You both get rep.