AznChris

So I wasn't sure if this goes under Motherboard or Powersupply, but I was wondering if I could just use a standard desktop grade power supply for this motherboard (X8DTT-F-SG007). The OP in this thread (http://www.jonnyguru.com/forums/showthread.php?t=12212) talked about proprietary power supply connector? So I'm not sure if I can use a standard desktop power supply or not. Thanks!

Well majority of the time, my fans run at low RPMs and my H100i seems to be able to run without fans too so I don't mind. There was a time where my cpu ran without a flowing h100i (It was passively cooling without the pump plugged in because I forgot to by accident) and it ran for over 12 hours. When I got home the computer was laggy, but still usuable. When I plugged it in, it ran fine again till this day. I also still have more fan slots available. There are controllers that use knobs and LCD, but I'm looking for something that is pressure sensitive like car pedals. I just don't know how the electronic/wiring part would work. It's not exactly my field, but I usually ghetto rig whatever I can if I can figure it out.

Yes I know spinning fans faster may ruin it, ok, I don't really care. Does anyone know how to rev a computer fan with maybe say a load cell and g27 pedals? The fans in a computer make up most of the loud noises and I wanted to try and replicate the feeling/sound you get when you rev a car by pushing down on the gas pedal of the g27... except we all know that fans won't sound nearly as close as a car engine. I'm not trying to make it look pretty just the 'how to' is all I need atm.

bump.

Well it's that after the cloning process, I'm not even given an option to load the other OS anymore. If you read the OP, I mentioned how the drive that isn't being used as boot up isn't detected and how if I did a clean install and not clone I would be able to choose which OS I wanted to load.

HP Envy 15t-j100 Quad Edition CTO http://support.hp.com/us-en/product/HP-ENVY-15-j100-Quad-Edition-Notebook-PC-series/6521359/model/6521361/

Can't change boot order. There's only an item on the list that manages all the OS management thing. My boot order looks like the one in this picture. http://h10025.www1.hp.com/ewfrf-JAVA/Doc/images/116/c03747357.jpg It's an mSATA forgot to mention that. Also it's in a laptop. There's no more ports.

So I had bought a new MX200 SSD [edit: forgot to mention mSATA] for my laptop to be used with the 1TB HDD inside of it. I used "Paragon Migrate OS to SSD" to clone my HDD to the SSD and it works perfectly... sorta. The SSD will only load up if the HDD is removed. But if I load up the SSD and plug the HDD back in, the HDD does not show up in disk management or My Computer. Vise versa. SSD doesn't show up if HDD boots up. I need help. I want to be able to boot up my SSD and be able to use my HDD as an extra storage drive. The BIOS of the laptop doesn't seem to allow for me to choose which storage to load up too, only a OS management thingy, network adapter, USB, internal disc, external usb disc, etc. I've tried installing other versions of Windows 7, 8.1, 10 and they boot up fine because I get the option to choose which OS to load eventually during the startup process and the other drive that wasn't used for boot up is detected and works fine. TL;DR: Cloned HDD to SSD and now SSD will only boot up if HDD is removed and vise versa. The drive that wasn't used for boot up is not detected in disk management or My Computer.

So maybe a couple months ago, someone's been trying to reset my passwords to hack them, but has been failing. I'm not sure how they got the information they got probably some baddies on my computer, but I have reformatted my computer at least 2-3 times since then and changed my crucial passwords... Only Paypal pretty much. Gmail, Chase bank, Paypal, and not sure what other ones won't let unusual IPs in so I should be fine as long as they don't know too much which seems like they don't. They got my origin and to hassle that I have to go through to recover is too much so I ditched it. I only had BF2 Collection in there that I bought for $5. Ever since they've been trying to reset passwords like Steam, Reddit, Twitter, Skype, etc. They haven't been successful, but I don't think they have gotten into anything besides Origin yet. Any tips on what I should/could do? Oh by the way, luckily Steam gave me their IP address when they tried to reset the password, but I'm not sure if it's their real IP. I'm just going to leave it here if anyone wants it. 117.168.49.128 Oh one more thing that I might as well stick to this thread. Any tips on keeping the room cool or making my computer cooler in the summer? It's burning in here mainly because of strong computer + summer. 1 Exhaust fan blows out a TON of hot air especially when gaming. I even turned off SLI so that heat would not rise, but I'm thinking of taking it out temporarily for Summer since FFXIV is a bit dumb on the way it uses resources. Specs: Enthoo Luxe i7-4790K H100i MSI Gaming 7 Kingston Savage 1866MHz 2-Way SLI MSI GTX 970 Crucial M500 SSD Seagate HDD ... I'm not even sure if I'm on the right forum website or even in the correct sub forum. Oh well. If anything maybe a mod could move it?

Well I installed Corsair Link after the problem occurred. Windows 7 Ultimate 64-bit Corsair LINK Version 3.1.5525

Well. I installed Corsair Link after the issue happened to make sure that it could or could not be detected on the computer. It ended up not being able to be detected. I've already tried replugging everything too. Restarted computer. @GzeroD Yes I am comfortable editing my registry with instruction. (: If all else fails, I'll RMA. The issue is not that big at the moment because the pump still works so I don't want to lose my CPU cooler temporarily to an RMA.

-sniff sniff-

When I touch my H100i tubes, I can still feel the fluid flowing. It definitely is because I even turned off and turned the computer back on and felt the difference. The Corsair LED stopped working, the fan ports don't work, Corsair Link does not detect it, but the pump still seems to work. Any solutions or anything I should know?

I can't imagine that going well. Also I have no wall space kinda. In front of me are 2 windows.

Backplates are sooo expensive. MSI doesn't have any for this particular model either. I'm sad and crying because every other GTX 900 series by MSI has a backplate. I don't know how to work with acrylic nor do I think I have the tools to cut or anything. I only have an electric screwdriver Sounds fun, but sounds expensive to start. (Just guessing at least)