Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

pyrojester009

Member
  • Content Count

    42
  • Joined

  • Last visited

Awards


This user doesn't have any awards

About pyrojester009

  • Title
    Member
  1. Looking though the other wires that were included with the case, I found one that had a USB connection on one end. Unfortunately, there isn't anywhere to plug the other end into on the hub. Upon further internet searches, I came across a post for a different TT case that used a similar hub. It looked basically identical. Looking through, and it was discovered that no PWM support was offered with that hub. There isn't any way that I can think of to even DC control them. I wouldn't be able to buy a better hub since the fans that came with the case are 6 pin and any other TT hub that I've come across has had 5 pin connectors. Seems kind of crappy that they would charge so much for a case, include ARGB fans, and create a connector that can't be used with any of their other products. *sad face*
  2. I was looking at the hub just a bit ago and was like "OH LOOK A COM PORT!". Unfortunately, the power for the hub is connected to the COM port. No other wires are coming from that connector.
  3. More specifically, a fan hub with RGB fans. A few months ago I built a computer for my sister. Naturally, she wanted all the RGBs. I've never built anything with RGB so now was as good a time as any to get started. Got everything hooked up and running except controlling the fan's RPM. The case she's using is the Thermaltake View 37 ARGB and it come with a fan hub for the included 3 fans. The manual is about as useful as herpes, no so dice there. On the hub there is a connector labeled 'fan 4' with 3 pins. I tried hooking that to the board to no avail. I've tried everything I can think of. The BIOS doesn't detect they're connected nor does the Thermaltake software. Any help would be appreciated. Case: https://www.thermaltake.com/view-37-argb-edition.html Motherboard: https://www.amazon.com/gp/product/B07FW85VFT/ref=ppx_yo_dt_b_asin_image_o06_s00?ie=UTF8&psc=1
  4. Yes. It shows up in the recording when I play it back.
  5. Only codec available to me is AVC. I've cranked the bitrate to 100Mbps and it didn't change the results ):
  6. Hey everyone. I've recently started recording some videos using AMD ReLive. Upon review of the video, I notice that the text has a reddish, rainbow effect around it. I've only really noticed it in games like WoW and inside the CCC itself (but not quite to the same degree as the control panel). I did a little bit of research and the only thing I could find referred to using HDMI and changing the Pixel Format. I use DVI so that doesn't apply to me. I've messed around with the bit rate and that didn't seem to help any. I'm currently on 18.6.1, using a 390x at 1080p. If there is any other information you need, just let me know. Thanks in advance.
  7. Thanks for all the replies. For whatever reason the modem isn't assigning an IP address to the router. I tried the MAC cloning again and even assigned the IP myself. Still no luck. The tech will be here on Monday, though.
  8. I've tried a different router as well. One I know works. This is a brand new modem as of tonight. My original modem was doing what this one is doing. Sigh.
  9. Changing the MAC changed nothing. I am completely stumped.
  10. I think I recall seeing an option to set a MAC manually for the router. I'll gave that a peek and let you know.
  11. Upstream is 43-44. The 4th stream is the same as the 8th for down. I don't know how many times I've unplugged the modem. Comcast has done it as well. Twice on the new modem. Would any of this cause the modem to only recognize one specific computer and only that computer? That's the main issue right now. Can't use a router with my modem and no other computer except the one I'm now is recognized by the modem.
  12. Here you go: Channel Lock Status Modulation Channel ID Freq. (MHz) Pwr (dBmV) SNR (dB) Corrected Uncorrected 1 Locked QAM256 1 513.0 -4.8 40.8 2221 0 2 Locked QAM256 2 519.0 -5.1 40.5 2575 0 3 Locked QAM256 3 525.0 -5.2 40.3 2662 0 4 Locked QAM256 4 531.0 -5.6 40.2 2782 0 5 Locked QAM256 5 537.0 -5.7 40.1 2512 0 6 Locked QAM256 6 543.0 -5.9 39.9 2300 0 7 Locked QAM256 7 549.0 -6.3 39.9 2092 0 8 Locked unknown 0 0.0 0.0 0.0 0 0 Total 17144 0
  13. I had the new one setup through the web browser. Though, when I called the last time the agent went through and made sure was working since I was getting abysmal speeds. That much has been fixed. What do you mean by 'signals'? Not sure what you're referring to.
  14. Don't see any settings that are changeable in the modem itself. Did notice that it's only connecting as IPv6. Noticed that earlier and tried to enable that in the router. But since they weren't communicating, The router wouldn't let me save the setting. This is in the Event Log of the modem. Now that I think about it, when I was looking through the log of the other modem it did mention issues with DHCP not initializing. I believe that's the wording. Also, DHCP is enabled on the router. Time Not Established Critical (3) No Ranging Response received - T3 time-out;CM-MAC=00:40:36:4... Tue Jun 27 09:38:25 2017 Information (7) Authorized;CM-MAC=00:40:36:49:fa:c0;CMTS-MAC=01:23:45:67:89:... Time Not Established Critical (3) SYNC Timing Synchronization failure - Failed to acquire QAM/... Mon Aug 14 19:07:07 2017 Critical (3) Resetting the cable modem due to docsDevResetNow Time Not Established Critical (3) No Ranging Response received - T3 time-out;CM-MAC=00:40:36:4... Mon Aug 14 19:50:12 2017 Critical (3) Resetting the cable modem due to docsDevResetNow Time Not Established Critical (3) No Ranging Response received - T3 time-out;CM-MAC=00:40:36:4... Mon Aug 14 20:13:09 2017 Critical (3) Resetting the cable modem due to docsDevResetNow Time Not Established Critical (3) No Ranging Response received - T3 time-out;CM-MAC=00:40:36:4... Time Not Established Notice (6) Honoring MDD; IP provisioning mode = IPv6
×