-
Posts
606 -
Joined
-
Last visited
Content Type
Forums
Status Updates
Blogs
Events
Gallery
Downloads
Store Home
Everything posted by Inrix
-
Floatplane Downloader & Plex [With Code & Guide]
Inrix replied to Inrix's topic in Programs, Apps and Websites
So they changed the naming for TechLinked to TL today... Here is a updated float.js file which will sort TechLinked correctly again: float.js Just replace your one with the one above. I'll update 3.8.3 with it later for people doing new installs later today.- 199 replies
-
- floatplane
- download
-
(and 4 more)
Tagged with:
-
Handbrake Encoding on Dual CPU Computer
Inrix replied to Locutis's topic in Programs, Apps and Websites
I use StaxRip to encode things into HEVC all the time, I can generally encode two videos at 350fps each with my 1080 and sit around 10% cpu utilisation on my 6700k. If your doing gpu encoding then your gonna be limited by your gpu, hands down. The only way around this is getting another GPU for your system. Though tbh, you want it to utilise the entire thing. -
Floatplane Downloader & Plex [With Code & Guide]
Inrix replied to Inrix's topic in Programs, Apps and Websites
Version 3.8.3 - HotFix - Fixes & TechLinked Support (GitHub) Release 3.8.3.zip Install.zip Update.zip This is a HotFix for adding support for TechLinked. It also contains some fixes that were finished and ready for the next release. TechLinked support is mainly for plex, 3.8.2 can download the videos fine, it just does not have the ability to sort them into its own folder for plex. I also created a banner for TechLinked for plex too which is under the videos/artwork alongside the others. Changelog Install Guide If your updating then just download the Update.zip extract it to your install folder and run it. It will automagically update all the needed files and move your settings over. For people who are doing a fresh install just follow the below guides: Installing the Script & Downloading Setting up Plex Settings Info As always if you run into any issues you are free to Create a issue here, Contact me on Discord @sirInrix | <3#6950 or Leave a comment on the LTT form post- 199 replies
-
- floatplane
- download
-
(and 4 more)
Tagged with:
-
Floatplane Downloader & Plex [With Code & Guide]
Inrix replied to Inrix's topic in Programs, Apps and Websites
Just noting that some Floatplane Exclusives are not being correctly formatted due to LTT switching up how they are doing the naming. Im planning on rewriting the code dealing with tagging videos anyway so this should get fixed next release. This can also apply to videos that are not prefixed as the script wont give them a episode number and will sort then into the first folder it can match them to. These issues are only really plex related.- 199 replies
-
- floatplane
- download
-
(and 4 more)
Tagged with:
-
Floatplane Downloader & Plex [With Code & Guide]
Inrix replied to Inrix's topic in Programs, Apps and Websites
Version 3.8.2 - New Plex Settings, Tweaks & Fixes (GitHub) Release 3.8.2.zip Install.zip Update.zip This release adds the ability for you to remotely update a plex server if plex is not installed on the same machine the script is on. It also simplifies the input of some settings and changes how plex updates are done. If you were using the plex update feature before then all you need to do is set localPlex to true and the script should function as normal. There are also some important fixes to the install and update scripts mainly fixing issues with fresh installs. Changelog Install Guide If your updating then just download the Update.zip extract it to your install folder and run it. It will automagically update all the needed files and move your settings over.I suggest double checking that everything is correctly updated in the settings.json though it should move your old settings over properly. For people who are doing a fresh install just follow the below guides: Installing the Script & Downloading Setting up Plex Settings Info As always if you run into any issues you are free to Create a issue here, Contact me on Discord @sirInrix | <3#6950 or Leave a comment on the LTT form post- 199 replies
-
- floatplane
- download
-
(and 4 more)
Tagged with:
-
floatplane club Floatplane Club as a Plex channel
Inrix replied to Nitroblast's topic in Forum Suggestions
Nothing official, but this is still very alive and actually just updated adding support for remote plex servers too... Probably the best way to get plex integration for now. -
Floatplane Downloader & Plex [With Code & Guide]
Inrix replied to Inrix's topic in Programs, Apps and Websites
Version 3.7.1 - Minor tweaks & fixes (GitHub) Release 3.7.1.zip Install.zip Update.zip This release only really has a few small things added over 3.7.0 which was the latest big release. Minor tweaks and fixes mostly. Install Guide If your updating then just download the Update.zip extract it to your install folder and run it. It will automagically update all the needed files and move your settings over.I suggest double checking that everything is correctly updated in the settings.json though it should move your old settings over properly. For people who are doing a fresh install just follow the below guides: Installing the Script & Downloading Setting up Plex As always if you run into any issues you are free to Create a issue here, Contact me on Discord @sirInrix | <3#6950 or Leave a comment on the LTT form post- 199 replies
-
- floatplane
- download
-
(and 4 more)
Tagged with:
-
Yea I understand, I'm 99% sure that it's not the gpu and its just a issue with the mobo settings I changed. But there's no way for me to reset it I'll try test with a different gpu tomorrow
-
I only have one other I can use to test and thats in my freeNAS box atm. I really don't want to kill it if the mobo is throwing a fit so I'm holding off that for now.
-
I've tried two different slots. And considering the board was posting fine just before the reboot I don't think that would be it Ill still try it later
-
I did but same thing happened. I have left it without AC and its batter for the past few hours. I'll probably try boot it again and see if itl run later tonight. Worst case the gpu somehow died but I really doubt that since it was working literally just before I rebooted with the different bios settings.
-
Says its probably GPU related but that gpu works fine. Im fairly sure its related to the BIOS settings I changed, but clearing CMOS is having no effect
-
I have tried holding down the CMOS button for 5 seconds and reseating the GPU and RAM. It posted fine 5 minutes ago before I changed some bios settings trying to get it to post with a Network Card that was having issues, since then it wont post and just gives 6 Beeps.
-
NVM Im a silly boi ;-; Ignore this <3
-
FreeNAS RaidZ 6x4TB - 500MB/s+ Write But 25MB/s Read?!
Inrix replied to Inrix's topic in Servers, NAS, and Home Lab
Oh man this has been an adventure. So, after ALOT of testing the networking, indevidual drives, FreeNAS install, Adaptor etc. I finally found out that the firmware version for my SAS Card was apparently known for having issues. I quick flash up to version 20.00.06 has fixed the write issue completely and freenas seems a lot happier now! The array is going VERY nicely now So for anyone out there who is having issues. I would suggest looking up if your firmware has any known issues, then troubleshooting the drives individually, then on another OS, etc. Thanks so much for your support @leadeater tbh I should have checked the firmware at the beginning but I was being stupid Glad it's all working now. -
FreeNAS RaidZ 6x4TB - 500MB/s+ Write But 25MB/s Read?!
Inrix replied to Inrix's topic in Servers, NAS, and Home Lab
Updaet 2. Its not the drive, seems something is up with the controller giving really bad read speeds but the write speeds are fine Im looking into it -
FreeNAS RaidZ 6x4TB - 500MB/s+ Write But 25MB/s Read?!
Inrix replied to Inrix's topic in Servers, NAS, and Home Lab
12 Hours Later.... *crackles with laughter* I found one drive that has fine writes but when you try to read it just dies... Im gonna reboot into freenas without that one and test again, Ill have to get it replaced. BUT YUS, PROGRESS -
FreeNAS RaidZ 6x4TB - 500MB/s+ Write But 25MB/s Read?!
Inrix replied to Inrix's topic in Servers, NAS, and Home Lab
Yea... I'm installing winServer2016 to test the controller/drives on a different os. Then I'll see about booting a older version of freenas -
FreeNAS RaidZ 6x4TB - 500MB/s+ Write But 25MB/s Read?!
Inrix replied to Inrix's topic in Servers, NAS, and Home Lab
I just want a redundant setup for a NAS with Raid5 type capabilities. But I didnt want to go with a minimal linux server because I really want a WebGui with stats etc for easy management. -
FreeNAS RaidZ 6x4TB - 500MB/s+ Write But 25MB/s Read?!
Inrix replied to Inrix's topic in Servers, NAS, and Home Lab
If I was to use something other than FreeNAS what would you recommend? -
FreeNAS RaidZ 6x4TB - 500MB/s+ Write But 25MB/s Read?!
Inrix replied to Inrix's topic in Servers, NAS, and Home Lab
Im currently running 11.1-U4 What do you suggest I try rollback to? http://iso.cdn.freenas.org/11/ -
FreeNAS RaidZ 6x4TB - 500MB/s+ Write But 25MB/s Read?!
Inrix replied to Inrix's topic in Servers, NAS, and Home Lab
Do you think it could be ram related? The system only has 8GB atm. I have another 8GB of ECC memory that I could put in it but its not the same make so I dunno if it would be worth testing with it or if it would just cause more errors -
FreeNAS RaidZ 6x4TB - 500MB/s+ Write But 25MB/s Read?!
Inrix replied to Inrix's topic in Servers, NAS, and Home Lab
Nevermind It was just windows caching the transfer from before..... So FreeNAS is still having issues with the array itself. What do you suggest I do now, because I know the drives are fine, I think the controller card/cables might have a issue but im not entirely sure. TBH I think im just going to turn everything off and leave this until tomorrow, I have been trying to get this to work for the past 9 hours and am really over fucking around with it. If you have any good ideas do shout them at me -
FreeNAS RaidZ 6x4TB - 500MB/s+ Write But 25MB/s Read?!
Inrix replied to Inrix's topic in Servers, NAS, and Home Lab
Just spent 2 hours trying to clean in cli before giving up and wiping the disks with a windows hdd I had laying around. Recreated the entire thing and tested on both adapters. Now I was able to get 100mb/s over the 1gb link but only 24mb/s read over the 10gig p2p. So I think it might be a issue with the 10gig link... *sigh* Im gonna look into the networking stuff and try figure out whats causing it to be upset, its on a different subnet and everything