WikoSiko

Yeah I've noticed massive dust build up on the side panel. Not sure if I left the filter on, from memory it interfered with the fans operation so I had to remove it I'll make sure to keep and eye on it thanks everyone.

So the two stock x61 fans at 800 - 2000 rpm on the bottom and the two p14s at 1500rpm the top won't cause any sort of turbulence? Should I have slower on the bottom or on the top?

Need help setting up the best possible configuration for My fans. My Case Is a NZXT Phantom 820 with 3 stock R9 290's and I have a Kraken x61 installed in the top on a I7 3770K. The fans installed are 2 BitFenix Spectre Pro 200mm, 2x Noctua NF-P14S Redux 140mm 1500RPM, 2 Stock H100i Fans (So SP120's), 2 Stock Kraken X61 fans, 1x Noctua NF-P14 FLX 140mm. Heres a crude image of my setup. Thanks Everyone.

Thanks everyone seeing as the Raid will only be for game, and movies nothing else the ssd will hold the rest considering it's a 250g, I'm not too fussed about data loss. One drive is probably on its last year whilst the other might have 5+ years. I'll make sure to test the older drive first make sure theres no bad sectors ect. And yeah can only try it but if all goes well I'll at least get a bit more speed hehe.

Sorry I own 3 r9 290's all with stock coolers and I run them at 50%+ fan speed most the time. So my estimation would be very off bahahaa

Yeah that's the sound I hear @airdeano the trickle and I figured a good wobble and time would fix it I'll leave the system running and check the temps make sure it's not a defect. Also to those asking how I measured the dba's it was an estimate. From like 30 cm's away with side pannel off. Thanks for the help again guys.

Thanks for the help guys what kind of benefits would I see with a raid 0?

Yeah I hot a h105 and I can hear the water flowing through the pump. It's about 30-40 decibels loud so I'm not sure how normal this is any ideas if this is normal? Thanks guys.

I have two 1tb hdds one: Seagate 7200 rpm WD Blue 7200 rpm Would on get a benefit if I was to Raid 0 these or is there a better raid for HDD's. Also I have a SSD as my boot drive so this would home the pagefile, browser caches and all my games. Thanks Guys.

UPDATE: After installing a 7950 I found the GPU to be the issue. BUT I still have to OpenCL error in GPU-Z. Any ideas why?

Try this: http://linustechtips.com/main/topic/12257-netflixmircosoft-silverlight-audio-problem/

Your profile doesn't even have your system specs.

Have you updated Corsair Link and the H100i Firmware? Corsair Link: http://www.corsair.com/us/media/cms/drivers/CorsairLINK2_Installer_v2.3.4816.exe How do I update the firmware on my H80i/H100i? Please follow these steps to update the firmware on your Hydro Series cooler: 1. Install the latest version of the Corsair Link software and use the "update firmware" button on the device tab. 2. Once Corsair Link exits a new dialog box comes up and you have to select "Corsair H80i/H100i" and then click back into the dialog box. 3. Use the choose file dialog box to select the unzipped firmware file. 4. Once you hit start it will flash the firmware and go through POST test on the H100i/H80i unit. The fans will spin up to full speed and then go back to the previous profile that was selected before the flash. 5. You can close the firmware flash dialog box and the program will open up again. 6. The service has to be restarted, so detection of the devices and inputs will take 15 to 30 seconds depending on how many you have. It will all come back up in the main program window as well as the devices window.

I've tried multiple sockets and different power boards, I've even tried completely different houses >.< Still the error persists. I'm more then %90 sure that it is my PSU.

Not to sound like a wet blanket :unsure:, but I already stated in my post the I have replaced my card once already and that when it is removed there are no issues. As for the PSU I still need to test it with another.