brandonb21

ok. il try to keep it as straight forward as i can i tried the cable that i had running from the switch to the pc because as my research above i know the cable going to the switch from the router is fine. and plugged it in to ethernet 1 2 3 and 4 on router and got 300 down both times at 1gbps. then i tried that same cable plugged into the switch to the pc on 1 2 3 4 and 5 i got 1gbps on windows but 95mbps on speedtest. i contacted bell aliant and they sent a free IT guy to my house and he looked and tried the switch he ran cat 6 and 7 to and from the switch same result. he contacted tp link and they told him its probably a faulty switch. so i contacted amazon and they sent me a dlink one for free to try as i had proof from bell that it was bad or possibly bad this is the one amazon is sending me https://www.amazon.ca/gp/product/B003X7TRWO/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

this is a cat 5e wire i made and i went from Router -----> switch ----> pc so i unplugged the wire and ran it Router ------> pc and i got this result i been running directly into router for few days now but i wanted to use the switch for my game consoles... so after finding this out im guessing the switch is bad,.

im using cat 5E i tested them all plugged in directly to router and got 350 down. yes i noticed that too its showing 100mb duplex in the router screen i ran 2 cables from router to pc and got 350 so ya the wires are fine the way i get internet is iSP from outside ----> Router ----> switch ----> pc the router has a modem built inside its all one unit i had a technistion here the other day and he tested it with a cat 6 and he only got 100mb down. he told me the switch could be faulty.

i bought a gigbit switch (TP-LINK TL-SG1005D) and i have 300 down 100 up fiber internet. and when i hocked up my switch plugged it into my router it showed on windows 10 network status i had a 1gb connection now if i do a speed test i get this now if i do a speed test on wireless i get this so my question is my switch faulty or do switches not support faster speeds then 100mbps? download/upload?

yeah i made a ticket but now i cant do my homework i have no other mouses D:

my mouse wheel lost feedback feel to it and mouse wheel no longers scrolls up or down but clicking in works fine like i said i just cant scroll up or down and theirs no "bumpy" feel when you scroll and it dosent work at all. i made a ticket on corsair rma website, but is their anything i can do in house to fix it? im in university and doing spread sheets without a mouse wheel working is almost impossible.

ahh ok! i wasnt sure what fintek was when i googled it.

i have a yellow icon and the device id tells me its ven_1934&dev_1205 i have an asus hero alpha z170 motherboard and im unable to find this driver. im running windows 10 64bit

i ran a smart test and dignotestic test last night with seagate tools app. and it passed. i just installed new achi drivers and im getting very fast speeds now over 150 now.

i just bought an 2tb seagate barracuda hardrive i have an asus z170 hero alpha motherboard and im getting slow reads and writes, my hard drive is plugged into my corsair air 540 hotswap bay. i also have a ssd by samsung a 950 pro 250 gb i doubt this would be causing any issues

heres a 1080 by msi at 2133mhz on core 5200mhz on memory

did some overclocking heres my results 2122mhz on the gpu core 5200mhz on the memory

it boost to 1870 at 75% fan speed. the card is quite so i dont mind running the fan that high. the default fan curve boost to 1813 ish

i was just wondering cause the bios matches the first 4 digits anyways

hi guys i just bought an msi 1080 gaming non x version so the non overclocked version of their non reference cooler. and im wondering what would happen if i flashed a gaming x bios onto my non x card? will i get the performance of a x version or will it just brick my card?