Jump to content

BassPro241

Member
  • Posts

    7
  • Joined

  • Last visited

Awards

This user doesn't have any awards

Profile Information

  • Gender
    Not Telling

BassPro241's Achievements

  1. Vessel username: BassPro241 Favorites of recent content: 1. https://www.vessel.com/videos/JemZ8O7Hy 2. https://www.vessel.com/videos/Su_Wqd7Vl
  2. I was looking more toward the adjustable fittings the last couple of days. They do seem to look nicer than stuff like the EK bridges,
  3. I had a feeling I was right about the water block after looking at both my cards and comparing to the reference 680.
  4. I was was looking for a bridge for the loop rather than a bridge for the cards themselves. I probably should have specified that better. As for the budget, probably up to around $750 if it even get's that high. I've never done this before so I don't know how much a loop like this could cost.
  5. Well, apparently that water block can be used on the 670 FTW cards. This is what my cards are exactly: http://www.coolingconfigurator.com/step1_complist?gpu_gpus=705
  6. Hi everyone, I'm planning on doing my first water cooling loop here in a few weeks. I've looked around at some of what I'd need, but I would like some recommendations for parts. Here are the specs I will be using for the PC itself. =================================================== Mobo: ASRock Extreme4 Z87 CPU: Intel i7 4770K GPU: 2x EVGA GTX 670 FTW Edition RAM: 16GB DDR3 1600 PSU: Corsair AX1200i Case: Corsair 760T SSD: Samsung 840 Evo 120GB HDD 1: 2TB WD Black 7,200RPM HDD 2: 1TB WD Black 7,200RPM Note that I already have a PC bit with most of these parts in a different case and I will be moving to the case listed there. I was already thinking of for the rads, doing one Swiftech MCR320-XP* and a second Swiftech MCR220-XP. As for GPU water blocks, I was going to go with a couple of EK GeForce 680 GTX+ blocks. And the CPU, I was going to get the EK-Supremacy Clean CSQ w/ Blue Acrylic. For everything else, I am somewhat clueless on what I should get for tubing, a pump, res, fittings, and SLI Bridge. I was wondering if anyone here can point me in a good direction for what they'd recommend for my loop? *The first rad because the link won't work on the text: http://www.frozencpu.com/products/13547/ex-rad-263/Swiftech_MCR320-XP_eXtreme_Performance_Triple_120mm_Slim_Radiator_-_MCR320-XP.html?tl=g30c95s161
×