Momenaut

okay, thank you!

one has spdif out and the other has optical

I have a rather diy 7.1 setup using a 5.1 system + 2.1 system for the side speakers (both logitech) and I want to plug them into the soundcards on both of my pc's. How do I do this? Thanks

I first discovered this problem trying to use pik tv but have figured out that it also occurs on crunchy roll and spotify. The screen goes fuzzy and I only get audio. Already tried with fresh installed browser, clearing cache, closing all open apps, uninstalling anything I thought could be the culprit. I've also tried booting into safe mode and got the services to work fine. Basically I think I need help from someone that knows if there's some sort of log or some way to figure out what is tripping the DRM so I can delete it. Thanks for any help in advance :)

I was hoping not to have to reseat it. I shelled out for kryonaut and it's kind of a one shot go. I plan to run turbo and all that just no manual oc. Only settings I've touched are turning off the c states.

I'm just running stock.

rofl it's literally called antec "one"

I just installed a new 9700k system and used my old h212+ in the build but hit 94 degrees in the 3d mark time spy cpu benchmark which is too hot for my liking. I'm wondering what kind of upgrade to my temps I can expect with a better cooler and which ones will fit in my case (antec one.)

I use a logitech 5.1 speaker system paired with another logitech 2.1 speaker system to achieve 7.1 audio on my z77a-g45 motherboard. With both speaker systems there are 4 plugs total. Would I be able to use my current setup to achieve 7.1 with this sound card?

I see. Well, thanks anyways.

Well it turns out I wasn't stable at that speed even with my cores turned off which is a shame cause I thought I'd be in the same voltage table there, but if I have to do that to see those speeds it's basically useless anyways is what you're telling me?

trying to get my turbo to run 45 on 1 core/44 on 2 but HWMonitor reports max speed is 43 on all cores even with prime95 1 thread test. I've tried enhanced turbo on/off and reducing 1/2 core speed to 44 all to no avail. What gives?

Trying to understand what these are and what they do and what I should have them set to for overclocking?

I realize it can cause stability issues which is why I'm looking at vdroop. I'm only running 4.3ghz so it's very conservative because my goal is to have a green/silent oc.

I'm having stability issues running overwatch with my auto voltage overclock and am wondering if it's my vdroop setting. It was set to auto when overwatch was crashing and I've literally just set it to 50% since I read someone saying to set it and forget it at 50%. Is this setting still ideal for an auto voltage or can I be more aggressive and set it lower like 37% etc.?

It shows the turbo and non-turbo speeds as being the same. I figured out that it disables turbo if you change the baseclock which is the same on modern boards so big derp from me. I would, however, like to know how it can get the 3.33ghz turbo as advertised without touching the baseclock. I don't have any experience with older mobos but this one is capped at 22x ratio and with a 133 (stock) baseclock I can't even get the chip past 2.9ghz turbo...

I have an old i5-760 on a p55-usb3 mobo and I'm having trouble getting the turbo boost to work properly. I can read the turbo speed in the bios and it always says it's the same as the baseclock and I have no idea how to change that.

Sorry guys, I was too fast for you and figured out my own problem. I needed to set the multiplier to auto instead of 34 for turbo to activate for whatever reason.

Decided to try and make my OC more green by increasing turbo boost instead of the base clock but I can't get turbo to kick in. I've been stress testing with intel extreme tuning as well as running Overwatch with afterburner OSD and it stays stock 3.4 at 100% usage in both scenarios. I have enhanced turbo turned on in the bios as well. Could any of the eco settings be stopping turbo? I've turned them all on except for EuP 2013.

this was exactly the kind of formula I was hoping for thank you!

z77a-g45 i5 3570k dual channel

Which is better for gaming? Is there a way to easily calculate without having to benchmark all my games?

I'm looking for a hard pad that has a surface as close as possible to my ikea desk I've been using thus far. I've felt a textured pad and it's softer than that but it's not quite silky smooth either. I'd also like it to be large size 17"+. And before anyone asks, no I can't keep using the desk as it's wearing.

So it just reverted the OC on restart and I'm stuck back at 1333... went back and changed the timing mode to link like you said and the advanced config but it's still stuck at 1333

Okay so some wierd things. I was using oc genie 2 and set the speed and voltage manually which didn't work. Then I thought maybe it was oc genie so I tried in standard mode which also didn't work. BUT after trying on oc genie mode again 1 more time has finally switched it to 1866. Intel extreme tuning utility tells me 1866 as well. Does that sound like a bios issue needing updating? Though I've bricked a mobo doing it before so I'm very weary of trying. I've also noticed my bios doing some weird things in the past like disabling eco settings right after I've saved them as enabled.