xOutcasTx

Hi So my pc won't boot into windows. It gets to the windows loading screen (has the bios logo though, which is normal) then goes blank and I get no output to my monitor. It has been having an error on boot up, something with some dll files but that's been doing it for a month now. Whenever I played GTA V and 5 minutes into the game it would black screen and no input. Sometimes it would restart windows and be up and running fine again. I'm not sure if it is game specific but I've only been playing GTA recently so can't say. I've tried to remove the GPU and boot with the onboard graphics with no luck. I also removed the ram, used 1 stick and checked all slots, no luck again. I then tried the windows repair stuff and nothing, used ddu and finally reinstalled windows. It got through the installation of windows fine. Booted up fine. Was about to install some apps and it black screened, no input. Now I can't get back into windows. (1 stick of ram installed and no gpu) It seems to be a hardware issue at this point I'm assuming, what could it be? I don't have any other hardware to test with.

Alright thanks.

I'm working on a long video with multiple clips that I will get over time. I was wondering if there was a way to keep the sliced up clips in vegas and delete the source file?

So I used this link on my spare molex adapter. Switched the 12V and 5V wired around and OMG ITS SOO MUCH MORE QUIET NOW, WHY DIDN'T I DO THIS EARLIER? Thanks for the help

Not really, just better to have the feature there for the future. Especially if it's only a few pennies more. Plus then I can use software to control it.

Are they PWM? Or just quiet at full?

Cooler Master Silencio 352. Supports 120MM in the front. I'd prefer a black fan, cheap, but a good brand.

I have an inline molex adapter lying around (molex to molex with the fan connector coming off one side). Any tutorials out there to show me how to swap the pins? And i'd like the fan recommendation anyway, It's being used as an intake on the front, there is also a filter on the front.

They are plugged into the splitter. I want to reduce the AF120 fan's speed or replace it with a PWM one.

Ik they're not, the other two are at 100% aswell but they aren't as loud as the Corsair "quiet" fan. The Intel Stock Cooler, on the CPU Fan header.

MOBO: Asrock B85M-Pro3 Fans: 2x Cooler Master XtraFlo fan (Included in my Cooler Master Silencio 352, Both not PWM) and a Corsair 120mm AF120 (Red LED one). PWM Splitter: Gelid 1-to-4 PWM Fan Splitter

No it doesn't.

It's plugged into a PWM Fan Splitter (Powered with a molex adapter). I only have 1 Fan Header (4Pin) to power 3 fans, so I either have to use the PWM Splitter or plug directly into molex with an adapter.

Hi there, Currently I have a Corsair AF120 Red LED fan and it is loud af. It's not PWM and is running at full speed. Is there any way to reduce the speed? Either that or does anyone have a recommendation for a cheap PWM Fan from a reputable brand? (UK Prices/stores). Thanks.

Around 72C under load