crostiger

It might be the norm for LTT which if it is ok well enough. But I order from a lot of places and none of the other places print the label before it is actually going to ship at most get a shipping notification and with in 30 minutes to 4 hours have movement of the package not a week or more at label created. In one case I ordered from LTT and another company for accessories for something else the LTT wasn't even something like these screw drivers that have a will ship by date actually something in stock. The other company had it shipped with in half an hour and in my mail box 2 days later and that was free shipping was a little over a week later after the other stuff showed up LTT shipped and there was shipping and I know that's standard for them because a lot what they sell leaves Canada and isn't cheap.

So I ordered a couple of the Noctua themed screwdrivers and I know they will ship by the 15 but I got a shipping notification but has been at label created for a week I thought they stopped printing them so far in advance or did that not change?

Ok so going to try and cover things in the original and this post. As far as price goes are there things that are comparable that are cheaper yes better depends on the person. And along with the price there have been and still are instances that R&D cost money if you were paying for engineers for years with no profits coming in from what they were doing you might start a little high to is that to say the prices will come down some day who knows in time I hope so a little. Do I think they need to be certified I personally don't believe so. And as far as the torque wrench comment that's why they make them I have emailed company's asking for the torque spec and they said there isn't one were in my instance everything else I have that is similar has one and asked them to make one up and send it to me so if it breaks it inst my fault. Same idea with not using the tool that came with it that is a build in torque wrench for that item. And as far as building computers go most have instructions on how to install certain items little vague at times yes but it also doesn't tell you to grab a driver will a handle on it and go to town. Other then coolers most things you go tell it touches then like 1/16 of a turn more haven't mest up anything yet and I will snap most bolts put in front of me and told to crank it down then they come back what did you do it was still turning then it snapped off then I get better instruction.

So just wanted to ask is there a delay on the Noctua version because unless i am mistaken the Noctua was up for sign up before the stubby and the stubby came out and now the retro is also out but the Noctua is still just at the sign up faze. And also wondering might there be a clear version in the future I know they are teasing an all metal one but a clear one would be interesting.

So with my z590 plus wifi I am useing all the fan headers but I am not useing the aio header and one fan zero in armory crate is claiming to be at 70 rpm all the rest are normal so not sure if fan zero is tied with the aio and giving a reading because I have 5 fans plugged in and I am getting 5 good readings it is just fan zero that is showing a low rpm. I have also gone into bios and it only shows the fans that I have plugged in as working and not one that has a low rpm. cpu fan 900 cpu opt fan 900 chassis fan 1 850 chassis fan 2 690 chassis fan 3 690 Aio pump 0 not being used at all and Fan pwmino 70

Not sure how far you would be willing to go but looks like they are made out of nylon so would be able to stop it from fraying pretty easily. From the looks of it you can get the break away hardware and kind of make your own.

There was a question about a piece of tape for the bits if this is the standard practice part to have a piece of tape. I have ordered several screwdrivers and sets of bits they have all just had the fold and inserted on its self no tape. A couple have come loose from the slot haven't had any come open yet.

So with my last order I placed I got a wizmo tracking number but when I click on the tracking number it goes to wizmo but them almost immediately redirected me to the ups and shows the info there was wondering if this is something fairly new and or is it doing it to anyone else. In the past I click on wizmo and then there was an option to go to usp site once it had moved from wizmo.

So I am running windows 10 pro and after an update that installed about a week ago I got a couple errors that I have not gotten before. First one is ID 214 'microsoft.windowscommunicationsapps_8wekyb3d8bbwe' install failed for S-1-5-21-1264548-2663833287-641794853-1001. Error: 'The package could not be installed because resources it modifies are currently in use.' (0.2274335 seconds) second one is ID 10 The Appx operation 'RegisterPackageAsync' on 'microsoft.windowscommunicationsapps_16005.14326.21570.0_neutral_~_8wekyb3d8bbwe' failed for user 'S-1-5-21-1264548-2663833287-641794853-1001' - error 0x80073D02: Unable to install because the following apps need to be closed microsoft.windowscommunicationsapps_16005.14326.21564.0_x64__8wekyb3d8bbwe.. (Error: The package could not be installed because resources it modifies are currently in use.) not entirely sure what to make of it but find it a little weird that it took a week from update with pc on the entire time to get these I do have both event id 10 and 214 in the past but they are different from these.

OK but sense I haven't seen that message before is integrated in a web site the only one I use any kind of messenger on is Facebook or might there be something else going on?

So today I noticed 1014 with Name resolution for the name widget-mediator.zopim.com timed out after none of the configured DNS servers responded. Thought it might because we lost interent for a while but when going back in the past this is the only one from this site was wondering if anyone knows what this site is used for cant really find much. Windows just did a big update so maybe somthing changed there as well. I am on windows 10 pro.

So motherboard is a z590 plus wifi windows 10 pro. The issue I was having was it seemed like pages took a little more time to load then all browsers stopped loading. On my switch I still had activity to my computer. But I could still see people in steam didn't try to talk to them but it wasn't disconnected. But also in steam like trying to go threw the store it couldn't do anything either. So i just ran the windows troubleshooter said something about couldn't find dns and the internet icon would come and go but still no internet. So I tried the trouble shooter again this time said it found a fix would you like to try I hit yes then had to do a restart so im guessing it just reset the adapters and have internet again but was wondering if I might have something to worry about or not. I did a windows update last week but would think that would cause issues before now.

So it should be better because it is still continuing today within the last hour.

Browser, version and OS: firefox 116.0.2 windows 10 pro 64bit Steps to reproduce/what were you doing before it happened? Happens when refreshing the page. What happened? So some times I get a cloudflare window that pops up and is verifing secure connection and asks if I am human and it will come back but not every time. And also some times when refreshing I get a we have to resend data everything that was done in the past will be done again window. This seemed to start when there was an outage the other day. the message I get is To display this page, Firefox must send information that will repeat any action (such as a search or order confirmation) that was performed earlier. What did you expect to happen? just the site to refresh. Link to a page where it happened, if applicable: https://linustechtips.com/ not every time thow. Screenshots of the issue, if applicable: Any other relevant details: If it's a cloudflare error, what was the ray ID from the bottom of the error page? unkown

just picked some up to try my self I didn't go under the cap but the 40mm shrinks down to the smallest part of the handle ok I would recommend a heat gun tho takes a bit more heat then normal heat shrink.