Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

I think my MOBO is killing every Cpu I put in it, What should my Cpu voltages be? (i7 4790)

I had some serious stuttering issues with my system. After upgrading from an i5 4590 they seemingly went away for a while but have raised their head again on games that were working fine the other day.

 

I want to make sure all of my voltages are completely fine. I have checked HW Monitor, but I don't know what I'm looking for at all.

 

Is it possible that my Mobo is killing my components and if so would I see these sort of symptoms, or just have outright fails, and shutdowns?

 

I have attached my HW monitorUntitled.thumb.jpg.062ad17f1e0507c65ec51f6b29042984.jpg

Link to comment
Share on other sites

Link to post
Share on other sites

Look in your BIOS to see what the voltage is at.

Quote me to see my reply!

SPECS:

CPU: Xeon X5650 OC'd to 4.2GHz @ 1.35V (courtesy of @XR6)Motherboard: Asus Sabertooth X58 RAM: 6x4GB G.Skill Ripjaws X GPU: Asus RX 570 Strix Storage: 512GB Samsung 850 Pro and 1TB WD Blue PSU: EVGA 600B Case: Fractal Design Define C Cooling: H100i V2, be quiet! Pure Wings 2 (two intake, two exhausting through radiator) Monitor: 3x Dell P2210 on a Steelcase Eyesite triple monitor stand Mouse: Logitech MX Master 3 Keyboard: It changes, but usually Focus FK-9000 Mousepad: Steelseries QcK XL Headphones:  Sennheiser HD598SE and MEE M6 Pro

 

"If you don't measure things, it's not engineering; it's art." - Jack Ganssle

 

🏳️‍🌈

Link to comment
Share on other sites

Link to post
Share on other sites

VID looks OK, VCore looks OK...

[FS][US] Corsair H115i 280mm AIO-AMD $60+shipping

 

 

System specs:
Asus Prime X370 Pro - Custom EKWB CPU/GPU 2x360 1x240 soft loop - Ryzen 1700X - Corsair Vengeance RGB 2x16GB - Plextor 512 NVMe + 2TB SU800 - EVGA GTX1080ti - LianLi PC11 Dynamic
 

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, kelvinhall05 said:

Look in your BIOS to see what the voltage is at.

Yeah, or if for some reason you dont want to look at aida64

Link to comment
Share on other sites

Link to post
Share on other sites

voltages look fine, should be staying at 1.2V or bellow. check the voltages under a varying load, im thinking its Load Line Calibration(LLC) killing your chips or the PSU

I spent $2500 on building my PC and all i do with it is play no games atm & watch anime at 1080p(finally) watch YT and write essays...

Builds:

The Toaster Project! Northern Bee!

 

The original LAN PC build log! (Old, dead and replaced by The Toaster Project & 5.0)

Spoiler

"Here is some advice that might have gotten lost somewhere along the way in your life. 

 

#1. Treat others as you would like to be treated.

#2. It's best to keep your mouth shut; and appear to be stupid, rather than open it and remove all doubt.

#3. There is nothing "wrong" with being wrong. Learning from a mistake can be more valuable than not making one in the first place.

 

Follow these simple rules in life, and I promise you, things magically get easier. " - MageTank 31-10-2016

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

24 minutes ago, kelvinhall05 said:

Look in your BIOS to see what the voltage is at.

CPU Vcore 1.080v

CPU VRIN 1.740v

CPU VAXG 0.756v

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, Bananasplit_00 said:

voltages look fine, should be staying at 1.2V or bellow. check the voltages under a varying load, im thinking its Load Line Calibration(LLC) killing your chips or the PSU

How would I record a varying load, say using Prime95. Should I record the highest value, what am I looking for?

 

Also had the stuttering on a previous PSU, so it isn't that. Not even sure if the stuttering is related to CPu, but everything in the PC has been replaced but the Motherboard. I did buy another Mobo and test my i5 4590 on it, but who knows if that was already damaged, since the stuttering existed there to.

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Polarisandneptune276 said:

How would I record a varying load, say using Prime95. Should I record the highest value, what am I looking for?

id use some render benchmark probably and a game or two. you are really just looking for max voltage and seeing if avrage voltage gets suspicisly high

I spent $2500 on building my PC and all i do with it is play no games atm & watch anime at 1080p(finally) watch YT and write essays...

Builds:

The Toaster Project! Northern Bee!

 

The original LAN PC build log! (Old, dead and replaced by The Toaster Project & 5.0)

Spoiler

"Here is some advice that might have gotten lost somewhere along the way in your life. 

 

#1. Treat others as you would like to be treated.

#2. It's best to keep your mouth shut; and appear to be stupid, rather than open it and remove all doubt.

#3. There is nothing "wrong" with being wrong. Learning from a mistake can be more valuable than not making one in the first place.

 

Follow these simple rules in life, and I promise you, things magically get easier. " - MageTank 31-10-2016

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

11 minutes ago, Polarisandneptune276 said:

CPU Vcore 1.80v

no wonder

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

8 minutes ago, Bananasplit_00 said:

id use some render benchmark probably and a game or two. you are really just looking for max voltage and seeing if avrage voltage gets suspicisly high

These are my results after running cinebench twice

Untitled2.jpg

Link to comment
Share on other sites

Link to post
Share on other sites

13 minutes ago, Polarisandneptune276 said:

CPU Vcore 1.80v

missed this, but this is the problem. this shouold be like 1.15-1.2V... 1.4+ degrades and 1.8V would kill a chip pretty quick. set it to auto in the BIOS

 

1 minute ago, Polarisandneptune276 said:

These are my results after running cinebench twice

Untitled2.jpg

Looking at this though it dosent seem like its actiually using that voltage though, as here they are clearly normal.

I spent $2500 on building my PC and all i do with it is play no games atm & watch anime at 1080p(finally) watch YT and write essays...

Builds:

The Toaster Project! Northern Bee!

 

The original LAN PC build log! (Old, dead and replaced by The Toaster Project & 5.0)

Spoiler

"Here is some advice that might have gotten lost somewhere along the way in your life. 

 

#1. Treat others as you would like to be treated.

#2. It's best to keep your mouth shut; and appear to be stupid, rather than open it and remove all doubt.

#3. There is nothing "wrong" with being wrong. Learning from a mistake can be more valuable than not making one in the first place.

 

Follow these simple rules in life, and I promise you, things magically get easier. " - MageTank 31-10-2016

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, Bananasplit_00 said:

missed this, but this is the problem. this shouold be like 1.15-1.2V... 1.4+ degrades and 1.8V would kill a chip pretty quick. set it to auto in the BIOS

 

Looking at this though it dosent seem like its actiually using that voltage though, as here they are clearly normal.

So there doesn't seem to be a problem with the motherboard?

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, Polarisandneptune276 said:

So there doesn't seem to be a problem with the motherboard?

not one that HWINFO picked up on at least. if you havent already id reset the BIOS and flash the latest version too but the motherboard dosent seem to be the one. bad wall power and bad PSUs can also hurt components so those would be next in line to check

I spent $2500 on building my PC and all i do with it is play no games atm & watch anime at 1080p(finally) watch YT and write essays...

Builds:

The Toaster Project! Northern Bee!

 

The original LAN PC build log! (Old, dead and replaced by The Toaster Project & 5.0)

Spoiler

"Here is some advice that might have gotten lost somewhere along the way in your life. 

 

#1. Treat others as you would like to be treated.

#2. It's best to keep your mouth shut; and appear to be stupid, rather than open it and remove all doubt.

#3. There is nothing "wrong" with being wrong. Learning from a mistake can be more valuable than not making one in the first place.

 

Follow these simple rules in life, and I promise you, things magically get easier. " - MageTank 31-10-2016

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Bananasplit_00 said:

not one that HWINFO picked up on at least. if you havent already id reset the BIOS and flash the latest version too but the motherboard dosent seem to be the one. bad wall power and bad PSUs can also hurt components so those would be next in line to check

Already flashed to latest version and toyed with and reset the Bios a lot. Maybe my stuttering is elsewhere. Thanks anyway :)

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Polarisandneptune276 said:

CPU Vcore 1.080v

CPU VRIN 1.740v

CPU VAXG 0.756v

Seems fine, what are your temps?

Quote me to see my reply!

SPECS:

CPU: Xeon X5650 OC'd to 4.2GHz @ 1.35V (courtesy of @XR6)Motherboard: Asus Sabertooth X58 RAM: 6x4GB G.Skill Ripjaws X GPU: Asus RX 570 Strix Storage: 512GB Samsung 850 Pro and 1TB WD Blue PSU: EVGA 600B Case: Fractal Design Define C Cooling: H100i V2, be quiet! Pure Wings 2 (two intake, two exhausting through radiator) Monitor: 3x Dell P2210 on a Steelcase Eyesite triple monitor stand Mouse: Logitech MX Master 3 Keyboard: It changes, but usually Focus FK-9000 Mousepad: Steelseries QcK XL Headphones:  Sennheiser HD598SE and MEE M6 Pro

 

"If you don't measure things, it's not engineering; it's art." - Jack Ganssle

 

🏳️‍🌈

Link to comment
Share on other sites

Link to post
Share on other sites

47 minutes ago, kelvinhall05 said:

Seems fine, what are your temps?

I do see highs of up to 75, but mostly under 70 and about 35 idle.

Link to comment
Share on other sites

Link to post
Share on other sites

3 hours ago, Polarisandneptune276 said:

I do see highs of up to 75, but mostly under 70 and about 35 idle.

I have 4790 and my temp are like yours. what MB are you using?

Link to comment
Share on other sites

Link to post
Share on other sites

11 hours ago, Mohammed2935 said:

I have 4790 and my temp are like yours. what MB are you using?

Gigabyte H81-s2v

Link to comment
Share on other sites

Link to post
Share on other sites

45 minutes ago, Polarisandneptune276 said:

Gigabyte H81-s2v

My z87x oc force survived extreme heat in 2016 ……… I was using a bios version on my motherboard I was using F10 and I am suppose to use F9 because it is the last official stable bios version ….. they only posted F10B but I found the FINAL F10 in forum ……… anyway I was taking a shower which is located next to my room, when I finished and went out I felt extreme heat coming from my room ..... I felt heat from semi far room…… it was my crashed pc ….. no BSOD only black screen and very very loud fan noises ……. I was afraid to go near my pc because it is giving out a lot of heat …… I turn it off from the wall ………. I think is was a graphic card issue …… however I returned both of the titan x pascal 2016 and Nvidia replaced them for me.

 

if your pc has issues like crashing to black screen then your fans goes really loud you should turn it off when you go out.

 

I am still using the same ram cpu and mb ... they still work ok.

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


×