How do i screw in psu

[cbranham26]

First time builder but i cant figure this out. I have a nzxt s340 case with a bracket that goes on front of case. There are 4 screw holes, but i dont see where the bracket is lining up with the holes. The bracket seems bigger than the psu. Please help!

[Herman Mcpootis]

the PSU aligns with the hole in the bracket, screw it into the 4 mounts.

[Lurick]

Flip the PSU over

[Guest]

You have the PSU upside down........

[Bananasplit_00]

there are holes and slots in the bracket, some cases will have holes only for one orientation some will have for mounting the PSU both ways. looks like you would need to fip the PSU over to make it line up with the holes here

[cbranham26]

Thanks for the replies. I think I figured it out. As a first timer, I feel like I am seriously OVERTHINKING every single aspect of putting the computer together. I spent 750$ and am overly cautious I am going to damage something. Progress is going ok though, as long as I can figure out front panel connectors, as with my MOBO they are not labeled.

[STRMfrmXMN]

21 minutes ago, cbranham26 said:

Thanks for the replies. I think I figured it out. As a first timer, I feel like I am seriously OVERTHINKING every single aspect of putting the computer together. I spent 750$ and am overly cautious I am going to damage something. Progress is going ok though, as long as I can figure out front panel connectors, as with my MOBO they are not labeled.

The only thing you're likely to damage is the motherboard by installing the standoffs incorrectly, as well as the CPU if you have a chip that has pins that stick out (or, if your motherboard has the pins rather than the CPU, then those can also be damaged). Otherwise, it's mostly just adult Legos.