No signal monitor

[Qupter]

So hello recently I bought a GTX 1060 3gb used after I inserted it into my build everything worked fine, I wanted to move this GPU to my htpc after I did that my main PC doesn't give a signal to the monitor neither does it give a loading scrren, can you guys help me out

 

Specs:

Ryzen 2200g

2*4gb ballistic elite 2666mhz

Gigabyte ab350 mini itx

Corsair cx550m PSU

120gb SSD Kingston

1tb hhd wd blue

 

Thanks in Advance

 

Edit: extra info

Monitor I am using is a MSI g24c 

I got 2 connections on my motherboard HDMI and DP bit of them don't give a signal, same Story on the 1060 dp and HDMI don't give signal (the 1060 gives a signal on my htpc)

[VinZie]

What type of monitor? Are you trying to connect with HDMI, DP, VGAM OR DVI?

[Qupter]

2 minutes ago, VinZie said:

What type of monitor? Are you trying to connect with HDMI, DP, VGAM OR DVI?

See edit on topic

[VinZie]

1 minute ago, Qupter said:

See edit on topic

Does the graphics card turn on? Do you see fans spinning? Do you have the PCI-E connector fully plugged in?

[Qupter]

1 minute ago, VinZie said:

Does the graphics card turn on? Do you see fans spinning? Do you have the PCI-E connector fully plugged in?

Yes I have everything plugged in correctly, the card is seated/connected correctly, my keyboard and mice give lights ( when I press on caps lock my caps lock led turns on) everything else spins like it should, and turned on

[VinZie]

Just now, Qupter said:

Yes I have everything plugged in correctly, the card is seated/connected correctly, my keyboard and mice give lights ( when I press on caps lock my caps lock led turns on) everything else spins like it should, and turned on

Do you have the monitor on the correct input?

[Qupter]

2 minutes ago, VinZie said:

Do you have the monitor on the correct input?

Okay I've plugged it in my GPU and it magically worked so that's good the only problem left is my Mobo HDMI and dp don't give a signal

[Qupter]

4 minutes ago, VinZie said:

Do you have the monitor on the correct input?

I've plugged in my HDMI to my motherboard (ryzen 2200g) and my DP to my GPU (GTX 1060) I booted it and it recognized the GTX 1060 and booted it up to windows when I tried to switch my input device via my monitor settings to HDMI it refuses and sets me aromatically on DP again

[Sir Asvald]

1 minute ago, Qupter said:

I've plugged in my HDMI to my motherboard (ryzen 2200g) and my DP to my GPU (GTX 1060) I booted it and it recognized the GTX 1060 and booted it up to windows when I tried to switch my input device via my monitor settings to HDMI it refuses and sets me aromatically on DP again

Remove the card, then connect your monitor to your motherboard. Uninstall graphics driver. Then put the card back in then start the PC.

[Qupter]

4 minutes ago, Abdul201588 said:

Remove the card, then connect your monitor to your motherboard. Uninstall graphics driver. Then put the card back in then start the PC.

Okay somehow replugging everything and plugging back worked for a minute but the problem is back.

[Qupter]

28 minutes ago, Qupter said:

Okay somehow replugging everything and plugging back worked for a minute but the problem is back.

So I've put the 1060 back in the htpc and it works fine, but still no signal.