How to upgrade hp pro 6300 MT power supply or HP Elite 8200 sff (fix)

[MyNameWontFi]

28 minutes ago, DwenVy said:

D’accord mais je n’est pas de câble jaune 

 

j’ai : rouge/vert/noir/blanc avec vert

 

 

 

comment je fait pour savoir qui est plus jaune ?

 

Les couleurs ne comptent pas, all that matters is the wires configuration. follow this diagram https://imgur.com/20grXCC and wire your adapter like that. Again don't pay attention to the colors, just simply look at your cables and check where they are going according to my diagram. 

[DwenVy]

D’accord je fait sa en rentrant je vous réponds après 

[DwenVy]

Mais comment on enlève les câbles du 24pin ?

[MyNameWontFi]

2 hours ago, DwenVy said:

Mais comment on enlève les câbles du 24pin ?

 

[DwenVy]

Je n'y arrive pas

[DwenVy]

J'ai ausi une idée.

 

Si je changer de carte mère ? 

 

Genre celle-ci : https://www.cdiscount.com/informatique/cartes-meres/h61-pc-carte-mere-acr-lga-1155-broches-usb-2-0-ddr/f-10765-les7987248281572.html?idOffre=276031701&ef_id=CjwKCAjwvbLkBRBbEiwAChbckbWLTbs8WrI44Hx4lW-QqrvqDV9Q3kYhIWrSqpRzg7Wxp2u3vDBYABoCeZYQAvD_BwE:G:s&cid=search_pla&cm_mmc=PLA!COR!INF!MP!983658467!&gclid=CjwKCAjwvbLkBRBbEiwAChbckbWLTbs8WrI44Hx4lW-QqrvqDV9Q3kYhIWrSqpRzg7Wxp2u3vDBYABoCeZYQAvD_BwE

 

Sa marchera ? Je n'est pas envie de m'embêter avec tout sa.

[DwenVy]

Ou une autre carte mère dans les 30 $

[MyNameWontFi]

8 hours ago, DwenVy said:

J'ai ausi une idée.

 

Si je changer de carte mère ? 

yes you could buy another motherboard but you gonna need to buy a new case too cause standard motherboards don't fit in HP cases. Also H61 boards have only 2 RAM slots meaning you can't upgrade to 16GB RAM unless you already have 2x8GB RAM.

You could also buy the right adapter. I could try to show you which adapter to buy exactly if I knew in which country you're located.

[DwenVy]

Je suis en France, mais j'ai trouver celle-ci : IPMMB-FM

 

J'ai regarder elle est compatible, je l'est acheter pour 20 $ j'ai aussi trouver un ancien boitier ATX 

 

Tout fonctionnera ?

[MyNameWontFi]

 

 

 

1 hour ago, DwenVy said:

Je suis en France, mais j'ai trouver celle-ci : IPMMB-FM

 

J'ai regarder elle est compatible, je l'est acheter pour 20 $ j'ai aussi trouver un ancien boitier ATX 

 

Tout fonctionnera ?

That board will fit your ATX board with no problem, but you gonna need to buy a new cooler because that small weird HP cooler will not fit in the case. Also, that motherboard has a Z75 chipset which happens to support overclocking but since it's from HP, you know those suckers might have locked the overclock option. Anyway, let me know how it goes.

[DwenVy]

combien coûte un nouveau cooler pour ce type de carte mère ?

[MyNameWontFi]

5 hours ago, DwenVy said:

combien coûte un nouveau cooler pour ce type de carte mère ?

There is a gazillion of CPU coolers from $10 and up. https://fr.pcpartpicker.com/products/cpu-cooler/#sort=price&xcx=0

if you're not sure which one to get, buy a used Intel stock cooler on eBay for around 5 to $10. All Intel stock coolers are the same (LGA 1156,1155,1150,1151). Also, don't forget to buy some thermal paste if you don't already have some laying around.

[DwenVy]

J’ai commandé celui là https://www.amazon.fr/dp/B00UQS59RK/?tag=pcp09-21

[comicsansms]

2 minutes ago, DwenVy said:

J’ai commandé celui là https://www.amazon.fr/dp/B00UQS59RK/?tag=pcp09-21

No. Look for one that's LGA 1156, LGA 1155, LGA 1150 or LGA 1151 compatible. That's not compatible with your system.

[DwenVy]

Vous en avez un avec la livraison prime pour 10$ ???

[MyNameWontFi]

7 hours ago, DwenVy said:

Vous en avez un avec la livraison prime pour 10$ ???

buy this one  https://www.ebay.fr/itm/Ventilateur-Ventirad-Intel-E97378-001-pour-socket-1150-1155-1156-NEUF/183724026996?hash=item2ac6ce2c74:g:GQ8AAOSwufFchV30

or this one https://www.ebay.fr/itm/Ventilateur-Radiateur-Intel-dorigine-neuf-socket-1150-1151-1155-CPU-i3-i5-i7/273711950214?hash=item3fba80e986:g:v2UAAOSwcUBYJdl~

and since those are new, you won't need thermal paste cause intel stock coolers come with thermal paste pre-applied.

[DwenVy]

J'ai acheter celui-ci, https://www.amazon.fr/Xilence-XC032-I250PWM-Refroidisseur-PC/dp/B01L6QMLE4/ref=sr_1_1?ie=UTF8&qid=1552854401&sr=8-1&keywords=xilence+i250+pwm

 

 

Mais merci beaucoup, je reçois la carte mère et le cooler Mercredi je vous tien au courant.

[kokobum]

i have to create an account and log in to say THANKS YOU

[Tristerin]

@FPS god

WELL DONE - just finished putting together this turd for fun and this "post" took my red led no post, to reinstalling windows on this Frankenstein for fun.  Thank you!  HP Pro 6300 all I had to do was follow your Paint diagram...simple, straight forward and to the point!

 

 

[Mr.Yuck]

Ok I read all 4 page of the thread.  I want to get rid of that annoying F1 boot up, but my I fear that the wiring on my adapter might be different then yours and also the color is different. So I don't know what wired I need to attach to the fan. Please help.

 

 

[MyNameWontFi]

20 minutes ago, Mr.Yuck said:

Ok I read all 4 page of the thread.  I want to get rid of that annoying F1 boot up, but my I fear that the wiring on my adapter might be different then yours and also the color is different. So I don't know what wired I need to attach to the fan. Please help.

Ok here's what I suggest. remove all those 4 cables from that P2 connector and put them back in like this https://imgur.com/bUhMvAW, then let me know if the PC still works like before. 

[Mr.Yuck]

12 hours ago, FPS god said:

Ok here's what I suggest. remove all those 4 cables from that P2 connector and put them back in like this https://imgur.com/bUhMvAW, then let me know if the PC still works like before. 

I did what you suggested and the PC still works like before.

[MyNameWontFi]

8 hours ago, Mr.Yuck said:

I did what you suggested and the PC still works like before

OK, fantastic. Now that your adapter is exactly wired like mine, go to my post on the first page and see where I talk about cutting the black cable on my adapter and attaching it to the green TAC cable of the CPU cooler. In your case, that black cable I'm talking about is yellow. simply cut your yellow cable from here https://imgur.com/qlHYwlJ and attach it to the CPU cooler.

[killer_bunny]

On 9/6/2018 at 12:38 PM, Tristerin said:

 

 

1.) The PSU connects to the mobo and out of the mobo are the SATA power rails correct?  I think that's how its set up, I haven't cracked the case in over 6 months.

Can you still use those rails coming off the mobo or would it be best (safest) to just utilize the connections from my ATX PSU I will be installing (I have a 650w laying around in my parts pile)

 

I just upgraded my HP 800G1 tower (i7-4770) using a harness from moddiy, and I can confirm that on this model you can use the original SATA harness/rails off the mobo to power your drive - The mobo is getting the same power as before, so the 6-pin SATA connector is still live, though it generally isn't needed since your aftermarket PSU should have the connectors you need.

 

Except in some  cases.

---------------------------------------------------------------------

HP uses a 6-pin slimline SATA power cable for their DVD drive, the EVGA 500BR doesn't have this connector, so if you have this same problem you can do what I did and re-install that rail harness  to specifically power the DVD drive.

 

And out of curiosity , I just tried using it to power my other drives and it worked. 

If you don't want to use the original harness at all and you have a slimline SATA powering your drive, you can find "slimline SATA 6 pin to standard SATA 15 pin adapters" online, but they're like $10, and I'm a cheap bastard.... You could also cut the original slimline SATA connector (2-wire) and make your own adapter if you have a male SATA/4-pin molex terminal lying around - It uses the red/black wires only.

 

 

[killer_bunny]

Just upgraded my HP 800G1 (Haswell) to an aftermarket PSU.

Everything works great, but I'm having issues getting rid of the "515" fan error code at the start.

 

I tried jumping the "TAC" wire off the P2 connector, which originally was white, to the "TACH" wire on the CHFAN2 (rear fan) connector, which is grey.

And I get 2 codes instead  - The "515" PSU fan error, and also a "512" Chassis fan error. If I try and jump of the CPU's 4-pin fan connector, I have the same issue (2 error code, 515 and I think it was 511)

Anyone have any suggestions?

 

Thanks for any help.