Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

M.2 from laptop not working in x370 Mobo

Hi.

So I have built my first mid end PC. 

Ryzen 1700, 16Gb ram, Asus prime pro x370, gtx 770. (If more specs needed just ask)

 

I have only one sata SSD on 240gb.

My friend gave me a Toshiba m.2 ssd from an old laptop because his mobo didn't have a m.2 slot.

 

M.2 SSD (THNSNJ512GDNU) 512Gb

 

When I put it in the system it doesn't show up in the bios.

When I boot into my windows, in the Disk manager it show Disk 1 as Unknown (see picture)

 

I tried initializing it but didn't work.

 

I tried disabling USB 3.1 controller.

Changing SSD data port from sata01 to sata07.

I inserted my graphics card into the pcie 16_2.

 

Tried PCI x2 and x4 mode.

 

Updated the bios and now have the latest 17/11/2017

 

If anyone have any solutions or any ideas please help. I would like this drive to work but I don't know if the drive is dead or I'm missing the key.

 

Thank you.

 

 

 

1511201531608804927059.jpg

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, RazA00 said:

Hi.

So I have built my first mid end PC. 

Ryzen 1700, 16Gb ram, Asus prime pro x370, gtx 770. (If more specs needed just ask)

 

I have only one sata SSD on 240gb.

My friend gave me a Toshiba m.2 ssd from an old laptop because his mobo didn't have a m.2 slot.

 

M.2 SSD (THNSNJ512GDNU) 512Gb

 

When I put it in the system it doesn't show up in the bios.

When I boot into my windows, in the Disk manager it show Disk 1 as Unknown (see picture)

 

I tried initializing it but didn't work.

 

I tried disabling USB 3.1 controller.

Changing SSD data port from sata01 to sata07.

I inserted my graphics card into the pcie 16_2.

 

Tried PCI x2 and x4 mode.

 

Updated the bios and now have the latest 17/11/2017

 

If anyone have any solutions or any ideas please help. I would like this drive to work but I don't know if the drive is dead or I'm missing the key.

 

Thank you.

 

 

 

1511201531608804927059.jpg

Also, When I have the m.2 ssd in, the bios loads very slow than usually.

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, thom derksen said:

You just need to initialize it...

Here is a picture, aaand when I'm initializing it in disk manager, it says files not found or something. So that isn't working. I tried to clean thrue cmd didn't work either. But when I check rpoporties its says the drive is working fine. Idk, maybe windows is drunk.

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, RazA00 said:

Here is a picture, aaand when I'm initializing it in disk manager, it says files not found or something. So that isn't working. I tried to clean thrue cmd didn't work either. But when I check rpoporties its says the drive is working fine. Idk, maybe windows is drunk.

 

IMG_20171120_192951.jpg

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, thom derksen said:

You did the whole:


diskpart
list disk
select disk (disk number)
clean

??

Let me asseble in the SSD one more time and I will show whats happening

 

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, thom derksen said:

Serious? Please dont download it... You can do the same with diskpart

Sorry to disappoint you, but yes, I'm serious.  Geez.......

 

Link to comment
Share on other sites

Link to post
Share on other sites

Reset and clean in it CMD. @thom derksen has the command line info you need to do this.

Primary PC-

CPU: Intel i7-6800k @ 4.2-4.4Ghz   CPU COOLER: Corsair H110i GTX   MOBO: MSI X99A SLI Plus   RAM: 32GB Corsair Vengeance LPX quad-channel DDR4-2800  GPU: EVGA GTX 1080 SC2 iCX   PSU: Corsair RM1000i   CASE: Corsair 750D Obsidian   SSDs: 500GB Samsung 960 Evo + 256GB Samsung 850 Pro   HDDs: Toshiba 3TB + Seagate 1TB   Monitors: Acer Predator XB271HUC 27" 2560x1440 (165Hz G-Sync)  +  LG 29UM57 29" 2560x1080   OS: Windows 10 Pro

Album

Other Systems:

Spoiler

Home HTPC/NAS-

CPU: AMD FX-8320 @ 4.4Ghz  MOBO: Gigabyte 990FXA-UD3   RAM: 16GB dual-channel DDR3-1600  GPU: Gigabyte GTX 760 OC   PSU: Rosewill 750W   CASE: Antec Gaming One   SSD: 120GB PNY CS1311   HDDs: WD Red 3TB + WD 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200 -or- Steam Link to Vizio M43C1 43" 4K TV  OS: Windows 10 Pro

 

Offsite NAS/VM Server-

CPU: 2x Xeon E5645 (12-core)  Model: Dell PowerEdge T610  RAM: 16GB DDR3-1333  PSUs: 2x 570W  SSDs: 8GB Kingston Boot FD + 32GB Sandisk Cache SSD   HDDs: WD Red 4TB + Seagate 2TB + Seagate 320GB   OS: FreeNAS 11+

 

Laptop-

CPU: Intel i7-3520M   Model: Dell Latitude E6530   RAM: 8GB dual-channel DDR3-1600  GPU: Nvidia NVS 5200M   SSD: 240GB TeamGroup L5   HDD: WD Black 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200   OS: Windows 10 Pro

Having issues with a Corsair AIO? Possible fix here:

Spoiler

Are you getting weird fan behavior, speed fluctuations, and/or other issues with Link?

Are you running AIDA64, HWinfo, CAM, or HWmonitor? (ASUS suite & other monitoring software often have the same issue.)

Corsair Link has problems with some monitoring software so you may have to change some settings to get them to work smoothly.

-For AIDA64: First make sure you have the newest update installed, then, go to Preferences>Stability and make sure the "Corsair Link sensor support" box is checked and make sure the "Asetek LC sensor support" box is UNchecked.

-For HWinfo: manually disable all monitoring of the AIO sensors/components.

-For others: Disable any monitoring of Corsair AIO sensors.

That should fix the fan issue for some Corsair AIOs (H80i GT/v2, H110i GTX/H115i, H100i GTX and others made by Asetek). The problem is bad coding in Link that fights for AIO control with other programs. You can test if this worked by setting the fan speed in Link to 100%, if it doesn't fluctuate you are set and can change the curve to whatever. If that doesn't work or you're still having other issues then you probably still have a monitoring software interfering with the AIO/Link communications, find what it is and disable it.

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, thom derksen said:

Well I have suspision he already tried it...:

 

Ah sorry didn't catch that. That's strange, I don't have any other advice, sorry. Maybe see (if possible) if a firmware update on the SSD helps?

Primary PC-

CPU: Intel i7-6800k @ 4.2-4.4Ghz   CPU COOLER: Corsair H110i GTX   MOBO: MSI X99A SLI Plus   RAM: 32GB Corsair Vengeance LPX quad-channel DDR4-2800  GPU: EVGA GTX 1080 SC2 iCX   PSU: Corsair RM1000i   CASE: Corsair 750D Obsidian   SSDs: 500GB Samsung 960 Evo + 256GB Samsung 850 Pro   HDDs: Toshiba 3TB + Seagate 1TB   Monitors: Acer Predator XB271HUC 27" 2560x1440 (165Hz G-Sync)  +  LG 29UM57 29" 2560x1080   OS: Windows 10 Pro

Album

Other Systems:

Spoiler

Home HTPC/NAS-

CPU: AMD FX-8320 @ 4.4Ghz  MOBO: Gigabyte 990FXA-UD3   RAM: 16GB dual-channel DDR3-1600  GPU: Gigabyte GTX 760 OC   PSU: Rosewill 750W   CASE: Antec Gaming One   SSD: 120GB PNY CS1311   HDDs: WD Red 3TB + WD 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200 -or- Steam Link to Vizio M43C1 43" 4K TV  OS: Windows 10 Pro

 

Offsite NAS/VM Server-

CPU: 2x Xeon E5645 (12-core)  Model: Dell PowerEdge T610  RAM: 16GB DDR3-1333  PSUs: 2x 570W  SSDs: 8GB Kingston Boot FD + 32GB Sandisk Cache SSD   HDDs: WD Red 4TB + Seagate 2TB + Seagate 320GB   OS: FreeNAS 11+

 

Laptop-

CPU: Intel i7-3520M   Model: Dell Latitude E6530   RAM: 8GB dual-channel DDR3-1600  GPU: Nvidia NVS 5200M   SSD: 240GB TeamGroup L5   HDD: WD Black 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200   OS: Windows 10 Pro

Having issues with a Corsair AIO? Possible fix here:

Spoiler

Are you getting weird fan behavior, speed fluctuations, and/or other issues with Link?

Are you running AIDA64, HWinfo, CAM, or HWmonitor? (ASUS suite & other monitoring software often have the same issue.)

Corsair Link has problems with some monitoring software so you may have to change some settings to get them to work smoothly.

-For AIDA64: First make sure you have the newest update installed, then, go to Preferences>Stability and make sure the "Corsair Link sensor support" box is checked and make sure the "Asetek LC sensor support" box is UNchecked.

-For HWinfo: manually disable all monitoring of the AIO sensors/components.

-For others: Disable any monitoring of Corsair AIO sensors.

That should fix the fan issue for some Corsair AIOs (H80i GT/v2, H110i GTX/H115i, H100i GTX and others made by Asetek). The problem is bad coding in Link that fights for AIO control with other programs. You can test if this worked by setting the fan speed in Link to 100%, if it doesn't fluctuate you are set and can change the curve to whatever. If that doesn't work or you're still having other issues then you probably still have a monitoring software interfering with the AIO/Link communications, find what it is and disable it.

Link to comment
Share on other sites

Link to post
Share on other sites

11 minutes ago, RazA00 said:

Let me asseble in the SSD one more time and I will show whats happening

 

haha, I tried just now and it worked ( to clean in cmd but now initialize?)

Link to comment
Share on other sites

Link to post
Share on other sites

13 minutes ago, thom derksen said:

You did the whole:


diskpart
list disk
select disk (disk number)
clean

??

When I initialize with GPT it says: The specific disk not convertible because the size is less than the minimum size required for GDP disks.

When I try MBR it says: The system cannot find the file specified.

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, thom derksen said:

Go into diskmanager and make a new simple volume

The thing is, Its not showing Unallocated .. so how am I supposed to creat new simple volume?

Link to comment
Share on other sites

Link to post
Share on other sites

16 minutes ago, pyrojoe34 said:

Reset and clean in it CMD. @thom derksen has the command line info you need to do this.

how do i reset it? thank you 

Link to comment
Share on other sites

Link to post
Share on other sites

12 minutes ago, RazA00 said:

how do i reset it? thank you 

What does Disk Manager look like now that you ran clean in CMD?

 

Primary PC-

CPU: Intel i7-6800k @ 4.2-4.4Ghz   CPU COOLER: Corsair H110i GTX   MOBO: MSI X99A SLI Plus   RAM: 32GB Corsair Vengeance LPX quad-channel DDR4-2800  GPU: EVGA GTX 1080 SC2 iCX   PSU: Corsair RM1000i   CASE: Corsair 750D Obsidian   SSDs: 500GB Samsung 960 Evo + 256GB Samsung 850 Pro   HDDs: Toshiba 3TB + Seagate 1TB   Monitors: Acer Predator XB271HUC 27" 2560x1440 (165Hz G-Sync)  +  LG 29UM57 29" 2560x1080   OS: Windows 10 Pro

Album

Other Systems:

Spoiler

Home HTPC/NAS-

CPU: AMD FX-8320 @ 4.4Ghz  MOBO: Gigabyte 990FXA-UD3   RAM: 16GB dual-channel DDR3-1600  GPU: Gigabyte GTX 760 OC   PSU: Rosewill 750W   CASE: Antec Gaming One   SSD: 120GB PNY CS1311   HDDs: WD Red 3TB + WD 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200 -or- Steam Link to Vizio M43C1 43" 4K TV  OS: Windows 10 Pro

 

Offsite NAS/VM Server-

CPU: 2x Xeon E5645 (12-core)  Model: Dell PowerEdge T610  RAM: 16GB DDR3-1333  PSUs: 2x 570W  SSDs: 8GB Kingston Boot FD + 32GB Sandisk Cache SSD   HDDs: WD Red 4TB + Seagate 2TB + Seagate 320GB   OS: FreeNAS 11+

 

Laptop-

CPU: Intel i7-3520M   Model: Dell Latitude E6530   RAM: 8GB dual-channel DDR3-1600  GPU: Nvidia NVS 5200M   SSD: 240GB TeamGroup L5   HDD: WD Black 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200   OS: Windows 10 Pro

Having issues with a Corsair AIO? Possible fix here:

Spoiler

Are you getting weird fan behavior, speed fluctuations, and/or other issues with Link?

Are you running AIDA64, HWinfo, CAM, or HWmonitor? (ASUS suite & other monitoring software often have the same issue.)

Corsair Link has problems with some monitoring software so you may have to change some settings to get them to work smoothly.

-For AIDA64: First make sure you have the newest update installed, then, go to Preferences>Stability and make sure the "Corsair Link sensor support" box is checked and make sure the "Asetek LC sensor support" box is UNchecked.

-For HWinfo: manually disable all monitoring of the AIO sensors/components.

-For others: Disable any monitoring of Corsair AIO sensors.

That should fix the fan issue for some Corsair AIOs (H80i GT/v2, H110i GTX/H115i, H100i GTX and others made by Asetek). The problem is bad coding in Link that fights for AIO control with other programs. You can test if this worked by setting the fan speed in Link to 100%, if it doesn't fluctuate you are set and can change the curve to whatever. If that doesn't work or you're still having other issues then you probably still have a monitoring software interfering with the AIO/Link communications, find what it is and disable it.

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, pyrojoe34 said:

What does Disk Manager look like now that you ran clean in CMD?

 

the same disk 1 unknown (not initialized) and now when i right click the initialize disk option is unclickable. no unallocated block

 

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, RazA00 said:

the same disk 1 unknown (not initialized) and now when i right click the initialize disk option is unclickable. no unallocated block

 

 

Manually: after you select disk and clean in CMD type (if you exited you need to redo the steps above and select the correct disk):

-"convert GPT" (or MBR if that's what you want to use)

-"create primary partition"

-"format quick fs=ntfs"

-"assign"

 

Let us know if that does the trick. Is this going to be a boot drive or just a secondary drive?

Primary PC-

CPU: Intel i7-6800k @ 4.2-4.4Ghz   CPU COOLER: Corsair H110i GTX   MOBO: MSI X99A SLI Plus   RAM: 32GB Corsair Vengeance LPX quad-channel DDR4-2800  GPU: EVGA GTX 1080 SC2 iCX   PSU: Corsair RM1000i   CASE: Corsair 750D Obsidian   SSDs: 500GB Samsung 960 Evo + 256GB Samsung 850 Pro   HDDs: Toshiba 3TB + Seagate 1TB   Monitors: Acer Predator XB271HUC 27" 2560x1440 (165Hz G-Sync)  +  LG 29UM57 29" 2560x1080   OS: Windows 10 Pro

Album

Other Systems:

Spoiler

Home HTPC/NAS-

CPU: AMD FX-8320 @ 4.4Ghz  MOBO: Gigabyte 990FXA-UD3   RAM: 16GB dual-channel DDR3-1600  GPU: Gigabyte GTX 760 OC   PSU: Rosewill 750W   CASE: Antec Gaming One   SSD: 120GB PNY CS1311   HDDs: WD Red 3TB + WD 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200 -or- Steam Link to Vizio M43C1 43" 4K TV  OS: Windows 10 Pro

 

Offsite NAS/VM Server-

CPU: 2x Xeon E5645 (12-core)  Model: Dell PowerEdge T610  RAM: 16GB DDR3-1333  PSUs: 2x 570W  SSDs: 8GB Kingston Boot FD + 32GB Sandisk Cache SSD   HDDs: WD Red 4TB + Seagate 2TB + Seagate 320GB   OS: FreeNAS 11+

 

Laptop-

CPU: Intel i7-3520M   Model: Dell Latitude E6530   RAM: 8GB dual-channel DDR3-1600  GPU: Nvidia NVS 5200M   SSD: 240GB TeamGroup L5   HDD: WD Black 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200   OS: Windows 10 Pro

Having issues with a Corsair AIO? Possible fix here:

Spoiler

Are you getting weird fan behavior, speed fluctuations, and/or other issues with Link?

Are you running AIDA64, HWinfo, CAM, or HWmonitor? (ASUS suite & other monitoring software often have the same issue.)

Corsair Link has problems with some monitoring software so you may have to change some settings to get them to work smoothly.

-For AIDA64: First make sure you have the newest update installed, then, go to Preferences>Stability and make sure the "Corsair Link sensor support" box is checked and make sure the "Asetek LC sensor support" box is UNchecked.

-For HWinfo: manually disable all monitoring of the AIO sensors/components.

-For others: Disable any monitoring of Corsair AIO sensors.

That should fix the fan issue for some Corsair AIOs (H80i GT/v2, H110i GTX/H115i, H100i GTX and others made by Asetek). The problem is bad coding in Link that fights for AIO control with other programs. You can test if this worked by setting the fan speed in Link to 100%, if it doesn't fluctuate you are set and can change the curve to whatever. If that doesn't work or you're still having other issues then you probably still have a monitoring software interfering with the AIO/Link communications, find what it is and disable it.

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, pyrojoe34 said:

What does Disk Manager look like now that you ran clean in CMD?

 

 

15112050777241476907119.jpg

1511205113570873262189.jpg

Link to comment
Share on other sites

Link to post
Share on other sites

4 minutes ago, pyrojoe34 said:

 

Manually: after you select disk and clean in CMD type (if you exited you need to redo the steps above and select the correct disk):

-"convert GPT" (or MBR if that's what you want to use)

-"create primary partition"

-"format quick fs=ntfs"

-"assign"

 

Let us know if that does the trick. Is this going to be a boot drive or just a secondary drive?

Convert GPT doesn't work, but the next one is showing something

1511205228209470780755.jpg

15112053828411213571508.jpg

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, RazA00 said:

 

15112050777241476907119.jpg

1511205113570873262189.jpg

Try running the diskpart commands as an admin (right click diskpart and select "run as administrator")

 

You can try the advice outlined here: http://www.tomshardware.com/answers/id-2404649/bytes-free-showing-diskpart.html

 

You can try this too. Make sure the disk permissions include admin and that you're logged in as admin.

 

Primary PC-

CPU: Intel i7-6800k @ 4.2-4.4Ghz   CPU COOLER: Corsair H110i GTX   MOBO: MSI X99A SLI Plus   RAM: 32GB Corsair Vengeance LPX quad-channel DDR4-2800  GPU: EVGA GTX 1080 SC2 iCX   PSU: Corsair RM1000i   CASE: Corsair 750D Obsidian   SSDs: 500GB Samsung 960 Evo + 256GB Samsung 850 Pro   HDDs: Toshiba 3TB + Seagate 1TB   Monitors: Acer Predator XB271HUC 27" 2560x1440 (165Hz G-Sync)  +  LG 29UM57 29" 2560x1080   OS: Windows 10 Pro

Album

Other Systems:

Spoiler

Home HTPC/NAS-

CPU: AMD FX-8320 @ 4.4Ghz  MOBO: Gigabyte 990FXA-UD3   RAM: 16GB dual-channel DDR3-1600  GPU: Gigabyte GTX 760 OC   PSU: Rosewill 750W   CASE: Antec Gaming One   SSD: 120GB PNY CS1311   HDDs: WD Red 3TB + WD 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200 -or- Steam Link to Vizio M43C1 43" 4K TV  OS: Windows 10 Pro

 

Offsite NAS/VM Server-

CPU: 2x Xeon E5645 (12-core)  Model: Dell PowerEdge T610  RAM: 16GB DDR3-1333  PSUs: 2x 570W  SSDs: 8GB Kingston Boot FD + 32GB Sandisk Cache SSD   HDDs: WD Red 4TB + Seagate 2TB + Seagate 320GB   OS: FreeNAS 11+

 

Laptop-

CPU: Intel i7-3520M   Model: Dell Latitude E6530   RAM: 8GB dual-channel DDR3-1600  GPU: Nvidia NVS 5200M   SSD: 240GB TeamGroup L5   HDD: WD Black 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200   OS: Windows 10 Pro

Having issues with a Corsair AIO? Possible fix here:

Spoiler

Are you getting weird fan behavior, speed fluctuations, and/or other issues with Link?

Are you running AIDA64, HWinfo, CAM, or HWmonitor? (ASUS suite & other monitoring software often have the same issue.)

Corsair Link has problems with some monitoring software so you may have to change some settings to get them to work smoothly.

-For AIDA64: First make sure you have the newest update installed, then, go to Preferences>Stability and make sure the "Corsair Link sensor support" box is checked and make sure the "Asetek LC sensor support" box is UNchecked.

-For HWinfo: manually disable all monitoring of the AIO sensors/components.

-For others: Disable any monitoring of Corsair AIO sensors.

That should fix the fan issue for some Corsair AIOs (H80i GT/v2, H110i GTX/H115i, H100i GTX and others made by Asetek). The problem is bad coding in Link that fights for AIO control with other programs. You can test if this worked by setting the fan speed in Link to 100%, if it doesn't fluctuate you are set and can change the curve to whatever. If that doesn't work or you're still having other issues then you probably still have a monitoring software interfering with the AIO/Link communications, find what it is and disable it.

Link to comment
Share on other sites

Link to post
Share on other sites

4 minutes ago, pyrojoe34 said:

Try running the diskpart commands as an admin (right click diskpart and select "run as administrator")

 

You can try the advice outlined here: http://www.tomshardware.com/answers/id-2404649/bytes-free-showing-diskpart.html

 

You can try this too. Make sure the disk permissions include admin and that you're logged in as admin.

 

Did but same results as last time with diskpart. The video looks nice but the m.2 SSD doesnt have any volume, so there is nowhere to go for the proporties.

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, RazA00 said:

Did but same results as last time with diskpart. The video looks nice but the m.2 SSD doesnt have any volume, so there is nowhere to go for the proporties.

Your screenshot above shows the properties option. Just right click on the disk.

Primary PC-

CPU: Intel i7-6800k @ 4.2-4.4Ghz   CPU COOLER: Corsair H110i GTX   MOBO: MSI X99A SLI Plus   RAM: 32GB Corsair Vengeance LPX quad-channel DDR4-2800  GPU: EVGA GTX 1080 SC2 iCX   PSU: Corsair RM1000i   CASE: Corsair 750D Obsidian   SSDs: 500GB Samsung 960 Evo + 256GB Samsung 850 Pro   HDDs: Toshiba 3TB + Seagate 1TB   Monitors: Acer Predator XB271HUC 27" 2560x1440 (165Hz G-Sync)  +  LG 29UM57 29" 2560x1080   OS: Windows 10 Pro

Album

Other Systems:

Spoiler

Home HTPC/NAS-

CPU: AMD FX-8320 @ 4.4Ghz  MOBO: Gigabyte 990FXA-UD3   RAM: 16GB dual-channel DDR3-1600  GPU: Gigabyte GTX 760 OC   PSU: Rosewill 750W   CASE: Antec Gaming One   SSD: 120GB PNY CS1311   HDDs: WD Red 3TB + WD 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200 -or- Steam Link to Vizio M43C1 43" 4K TV  OS: Windows 10 Pro

 

Offsite NAS/VM Server-

CPU: 2x Xeon E5645 (12-core)  Model: Dell PowerEdge T610  RAM: 16GB DDR3-1333  PSUs: 2x 570W  SSDs: 8GB Kingston Boot FD + 32GB Sandisk Cache SSD   HDDs: WD Red 4TB + Seagate 2TB + Seagate 320GB   OS: FreeNAS 11+

 

Laptop-

CPU: Intel i7-3520M   Model: Dell Latitude E6530   RAM: 8GB dual-channel DDR3-1600  GPU: Nvidia NVS 5200M   SSD: 240GB TeamGroup L5   HDD: WD Black 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200   OS: Windows 10 Pro

Having issues with a Corsair AIO? Possible fix here:

Spoiler

Are you getting weird fan behavior, speed fluctuations, and/or other issues with Link?

Are you running AIDA64, HWinfo, CAM, or HWmonitor? (ASUS suite & other monitoring software often have the same issue.)

Corsair Link has problems with some monitoring software so you may have to change some settings to get them to work smoothly.

-For AIDA64: First make sure you have the newest update installed, then, go to Preferences>Stability and make sure the "Corsair Link sensor support" box is checked and make sure the "Asetek LC sensor support" box is UNchecked.

-For HWinfo: manually disable all monitoring of the AIO sensors/components.

-For others: Disable any monitoring of Corsair AIO sensors.

That should fix the fan issue for some Corsair AIOs (H80i GT/v2, H110i GTX/H115i, H100i GTX and others made by Asetek). The problem is bad coding in Link that fights for AIO control with other programs. You can test if this worked by setting the fan speed in Link to 100%, if it doesn't fluctuate you are set and can change the curve to whatever. If that doesn't work or you're still having other issues then you probably still have a monitoring software interfering with the AIO/Link communications, find what it is and disable it.

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, pyrojoe34 said:

Your screenshot above shows the properties option. Just right click on the disk.

Not the same as in the video

15112059583751982975211.jpg

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, RazA00 said:

Not the same as in the video

15112059583751982975211.jpg

I'm out of ideas then. You can try to make a Windows 10 USB, start a fresh install, and use the step before the actual install to initialize the disk. You can cancel the install after you do that step. If that doesn't work then I'm out of ideas, sorry.

Primary PC-

CPU: Intel i7-6800k @ 4.2-4.4Ghz   CPU COOLER: Corsair H110i GTX   MOBO: MSI X99A SLI Plus   RAM: 32GB Corsair Vengeance LPX quad-channel DDR4-2800  GPU: EVGA GTX 1080 SC2 iCX   PSU: Corsair RM1000i   CASE: Corsair 750D Obsidian   SSDs: 500GB Samsung 960 Evo + 256GB Samsung 850 Pro   HDDs: Toshiba 3TB + Seagate 1TB   Monitors: Acer Predator XB271HUC 27" 2560x1440 (165Hz G-Sync)  +  LG 29UM57 29" 2560x1080   OS: Windows 10 Pro

Album

Other Systems:

Spoiler

Home HTPC/NAS-

CPU: AMD FX-8320 @ 4.4Ghz  MOBO: Gigabyte 990FXA-UD3   RAM: 16GB dual-channel DDR3-1600  GPU: Gigabyte GTX 760 OC   PSU: Rosewill 750W   CASE: Antec Gaming One   SSD: 120GB PNY CS1311   HDDs: WD Red 3TB + WD 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200 -or- Steam Link to Vizio M43C1 43" 4K TV  OS: Windows 10 Pro

 

Offsite NAS/VM Server-

CPU: 2x Xeon E5645 (12-core)  Model: Dell PowerEdge T610  RAM: 16GB DDR3-1333  PSUs: 2x 570W  SSDs: 8GB Kingston Boot FD + 32GB Sandisk Cache SSD   HDDs: WD Red 4TB + Seagate 2TB + Seagate 320GB   OS: FreeNAS 11+

 

Laptop-

CPU: Intel i7-3520M   Model: Dell Latitude E6530   RAM: 8GB dual-channel DDR3-1600  GPU: Nvidia NVS 5200M   SSD: 240GB TeamGroup L5   HDD: WD Black 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200   OS: Windows 10 Pro

Having issues with a Corsair AIO? Possible fix here:

Spoiler

Are you getting weird fan behavior, speed fluctuations, and/or other issues with Link?

Are you running AIDA64, HWinfo, CAM, or HWmonitor? (ASUS suite & other monitoring software often have the same issue.)

Corsair Link has problems with some monitoring software so you may have to change some settings to get them to work smoothly.

-For AIDA64: First make sure you have the newest update installed, then, go to Preferences>Stability and make sure the "Corsair Link sensor support" box is checked and make sure the "Asetek LC sensor support" box is UNchecked.

-For HWinfo: manually disable all monitoring of the AIO sensors/components.

-For others: Disable any monitoring of Corsair AIO sensors.

That should fix the fan issue for some Corsair AIOs (H80i GT/v2, H110i GTX/H115i, H100i GTX and others made by Asetek). The problem is bad coding in Link that fights for AIO control with other programs. You can test if this worked by setting the fan speed in Link to 100%, if it doesn't fluctuate you are set and can change the curve to whatever. If that doesn't work or you're still having other issues then you probably still have a monitoring software interfering with the AIO/Link communications, find what it is and disable it.

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, pyrojoe34 said:

I'm out of ideas then. You can try to make a Windows 10 USB, start a fresh install, and use the step before the actual install to initialize the disk. You can cancel the install after you do that step. If that doesn't work then I'm out of ideas, sorry.

Thanks for the help anyways, i found Bootice and going to see what I can do :)

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


×