Hey Ryzen 1600 owners,wanted to know what is your voltage for the overclock ?

[lawlessPhantom]

Mine is 1.308v for 3.7ghz is it good or should i lower it?

[Techicolors]

that's fine, have you tried lower voltages?. you should try 3.8ghz with less than 1.4v. if it's all good go for 3.9ghz but make sure cooling is good 

[lawlessPhantom]

yeaa i tried 1.24-1.27v and overclock failed after 4 hours of prime95.While gaming my temprature rises to 73c.Is this much temprature can degrade my cpu?

 

19 minutes ago, Technicolors said:

that's fine, have you tried lower voltages?. you should try 3.8ghz with less than 1.4v. if it's all good go for 3.9ghz but make sure cooling is good 

yeaa i tried 1.24-1.27v and overclock failed after 4 hours of prime95.While gaming my temprature rises to 73c.Is this much temprature can degrade my cpu?

[♠FlamieMeister♠]

2 minutes ago, lawlessPhantom said:

yeaa i tried 1.24-1.27v and overclock failed after 4 hours of prime95.While gaming my temprature rises to 73c.Is this much temprature can degrade my cpu?

Nope. 73c is not enough.

[Techicolors]

are you using the stock cooler? 

[lawlessPhantom]

3 minutes ago, Technicolors said:

are you using the stock cooler? 

Yeaa

[Vandorlot]

73 shouldnt degrade the cpu but in the bios you can make the fan curve steeper or even always max. Im not even overclockong but i increased the fan curve heavily just for the longevity of my cpu. Its not even that loud.

 

Im also using the 1600 and stock. I want to get the cryorig h7

[lawlessPhantom]

8 minutes ago, Vandorlot said:

73 shouldnt degrade the cpu but in the bios you can make the fan curve steeper or even always max. Im not even overclockong but i increased the fan curve heavily just for the longevity of my cpu. Its not even that loud.

I already did that.After 60c my cooler runs at 100%.Here Ambient temp is high around 30c

7 minutes ago, Vandorlot said:

Im also using the 1600 and stock. I want to get the cryorig h7

Whats your overclock and voltage 

[Vandorlot]

7 minutes ago, lawlessPhantom said:

I already did that.After 60c my cooler runs at 100%.Here Ambient temp is high around 30c

It should be fine but you can upgrade to an cryprig c7 or the c7 quad lumi.

5 minutes ago, lawlessPhantom said:

Whats your overclock and voltage 

Im  it overclocking but plan on overclocking when i get home from vacation.

 

Pauls hardware has a video on ocing ryzen 5 with stock. He has a cheatsheet at the end.

[Beowulff83]

I was able to get 3.7 on 1.24 volts but haven't had a chance to mess with it further.

[lawlessPhantom]

6 minutes ago, Beowulff83 said:

I was able to get 3.7 on 1.24 volts but haven't had a chance to mess with it further.

which software did u use for stress and for how long did u test?

[johndms]

27 minutes ago, lawlessPhantom said:

Mine is 1.308v for 3.7ghz is it good or should i lower it?

I've successfully overclocked my Ryzen 5 1600 to 3.8 at 1.35v.  Tested cpu/fpu/cache with Aida64 for nearly 7 hours.  I don't use the stock cooler, but the Noctua NH-U12S SE-AM4.  My temperatures on stock cooler were 73c.  With Noctua cooler, they dropped to 61c.  Ambient temps around 23c.

 

I've also successfully overclocked to 3.9 at 1.4125v.  Tested for about 1.5 hours.  Temps with Noctua averaged around 64c.

[Beowulff83]

Just now, lawlessPhantom said:

which software did u test for stress and for how long did u test?

prime for a for about an hour, also had cpu mining on for a day and played bf1 for a few hours as well. I am back at stock setting right now though

[lawlessPhantom]

1 minute ago, johndms said:

I've successfully overclocked my Ryzen 5 1600 to 3.8 at 1.35v.  Tested cpu/fpu/cache with Aida64 for nearly 7 hours.  I don't use the stock cooler, but the Noctua NH-U12S SE-AM4.  My temperatures on stock cooler were 73c.  With Noctua cooler, they dropped to 61c.  Ambient temps around 23c.

 

I've also successfully overclocked to 3.9 at 1.4125v.  Tested for about 1.5 hours.  Temps with Noctua averaged around 64c.

So what are u running at now?

[johndms]

Just now, lawlessPhantom said:

So what are u running at now?

I'm sticking with the 3.8 at 1.35v.  I'm comfortable with those temps and voltage.

 

My Cinebench scores at 3.8 vs 3.9 weren't enough of a difference to justify the increased voltage.  Above 1.4v worries me.

(Ignore the multiple scores.  I was testing different ram speeds (2933 vs 3200))

[Brooksie359]

I know you said 1600 owners but i thought i would put my overclock for my 1700 as well. i got mine to run at 3.7 on all cores at 1.18v at one point and I did alot of testing and it was stable but then with newer bios it was no longer stable and I had to up it to 1.2 and then 1.25 and its finally really stable with stress testing done as well as heavy use in mutithreaded workloads like CAE programs like solidworks and ansys.

[lawlessPhantom]

1 minute ago, Brooksie359 said:

I know you said 1600 owners but i thought i would put my overclock for my 1700 as well. i got mine to run at 3.7 on all cores at 1.18v at one point and I did alot of testing and it was stable but then with newer bios it was no longer stable and I had to up it to 1.2 and then 1.25 and its finally really stable with stress testing done as well as heavy use in mutithreaded workloads like CAE programs like solidworks and ansys.

i will try to lower the voltages then