how to connect a apu pc

[KieranTHeBesT]

ok so i might sound dumb and its probably very easy but if i get a pc with an apu ex a8 6500 how would i connect it to the moniter

[Herman Mcpootis]

if you're using the iGPU connect the display cable to the correct port on the motherboard. if you have a didicated gpu in the rig connect the cable to the port on the gpu.

[ninjaelectron]

You would take a display cable, such as an HDMI Cable, DVI Cable, VGA Cable, or DisplayPort Cable (Whichever has a port that exists on the back of the computer), and plug it into the back of the computer by lining up the port with the connector (all of the mentioned cables only go in only one way, so don't force it.) and pushing it in. If it does not go in, make sure you have it lined up and try again. once plugged in you may have to tighten the screws on the cable (if it has any) with your fingers. Do the same on the ports on the monitor. next, plug in both to wall power, and turn both on. You may need to switch inputs on the monitor, which will be in the manual that comes with it.

[KieranTHeBesT]

2 minutes ago, ninjaelectron said:

You would take a display cable, such as an HDMI Cable, DVI Cable, VGA Cable, or DisplayPort Cable (Whichever has a port that exists on the back of the computer), and plug it into the back of the computer by lining up the port with the connector (all of the mentioned cables only go in only one way, so don't force it.) and pushing it in. If it does not go in, make sure you have it lined up and try again. once plugged in you may have to tighten the screws on the cable (if it has any) with your fingers. Do the same on the ports on the monitor. next, plug in both to wall power, and turn both on. You may need to switch inputs on the monitor, which will be in the manual that comes with it.

 

5 minutes ago, herman mcpootis said:

if you're using the iGPU connect the display cable to the correct port on the motherboard. if you have a didicated gpu in the rig connect the cable to the port on the gpu.

thanks