Is my cinebench score good?

[gaurav_23]

I just did a CPU and GPU benchmark via cinebench

CPU - Ryzen 7 1700, GPU - GTX 1060 6 GB

16 Gigs Corsair vengeance LPX 2400

CPU score(single core) - 111

Multi core - 1120

GPU - 67.32

 

I want to make 3D short film(Around 4 min.) using maya

Will this system will able to handle complex simulations and give good render time?

 

Thanks

[Danboy360]

Not sure why you seem to be getting such a low Multi-Core score, even with mine running stock between 3 to 3.2 GHz, I'm able to get 1300.  Regardless though, you should be able to do all kinds of rendering absolutely fine with any Ryzen 7 chip.

[Greenver_420]

My GPU score is: 90.25

CPU score:

1342 (multi core)

128 (single core)

10.51 (MP ratio)

 

See system details in my signature.

Edited May 11, 2017 by Greenver_420
Added single core & mp ratio

[ericchaipc]

13 hours ago, gaurav_23 said:

I just did a CPU and GPU benchmark via cinebench

CPU - Ryzen 7 1700, GPU - GTX 1060 6 GB

CPU score(single core) - 111

Multi core - 1120

GPU - 67.32

 

I want to make 3D short film(Around 4 min.) using maya

Will this system will able to handle complex simulations and give good render time?

 

Thanks

Dont mind to share , what is the max cpu and ram speed u get . 

[gaurav_23]

15 hours ago, Danboy360 said:

Not sure why you seem to be getting such a low Multi-Core score, even with mine running stock between 3 to 3.2 GHz, I'm able to get 1300.  Regardless though, you should be able to do all kinds of rendering absolutely fine with any Ryzen 7 chip.

 

 

Task manager is showing only 3 GHZ maximum speed, is that right? 

With HWmonitor I have seen 3199Mhz maximum speed, is that good?

[gaurav_23]

2 hours ago, ericchaipc said:

Dont mind to share , what is the max cpu and ram speed u get . 

I dont know but my Ryzen cpu is showing only 3.00 GHz max and I have 2400Mhz 16 GB RAM

[gaurav_23]

6 hours ago, Greenver_420 said:

My GPU score is: 90.25

CPU score:

1342 (multi core)

128 (single core)

10.51 (MP ratio)

 

See system details in my signature.

 

why i am getting such low Cinebench score

[Danboy360]

I wouldn't pay much attention to the speed on Task Manager, HW Monitor is definitely a much more trusty source.  Running at 3.2 is usually the range it will boost up to, but even then you should be hitting 1300 on stock frequencies.

[ericchaipc]

On 12/05/2017 at 1:45 PM, gaurav_23 said:

why i am getting such low Cinebench score

U run it on stock . Overclock it  a bit . Should be able to run it 3.7 and above. There us alot of factor u need to check . are u running a lot of thing at the background , did u accidentally disable core ? Ryzen love higher speed of ram speed . Try to push ur ram to 2666 . Might help a bit .

[Bluey78532]

I am getting a CPU score of 1550 in cinebench over clocked at 4GHz and 1.4v

I did the test again but with just stock settings and got 1627 at 3GHz

I think i need to fiddle with my voltage to find a sweet spot 

 

My build is:

CPU - Ryzen 7 1700

GPU - GTX 1060 6GB

Motherboard - MSI B350 PC Mate

Ram - GSkill 2400 16GB

 

 

[airdeano]

@Bluey78532

welcome to the Linus Tech Tips forums!

you'd prolly wanna post this in here: https://linustechtips.com/main/topic/62476-post-your-cinebench-r15r1152003-scores-over-1000-submissions/

reviving an old topic (thread necro) isn't needed.