Jump to content

Hey guys I've had my new system up and running a couple of weeks and i've noticed that my new NVme M.2 boot drive takes longer to boot into windows than my plane jane sata SSD? Its literally double if not more time to boot now.

 

All the specs are in my sig and the NVme drive is an Adata XPG SX8000 256GB. 

CPU | Intel i9-10850K | GPU | EVGA 3080ti FTW3 HYBRID  | CASE | Phanteks Enthoo Evolv ATX | PSU | Corsair HX850i | RAM | 2x8GB G.skill Trident RGB 3000MHz | MOTHERBOARD | Asus Z490E Strix | STORAGE | Adata XPG 256GB NVME + Adata XPG 1T + WD Blue 1TB + Adata 480GB SSD | COOLING | Evga CLC280 | MONITOR | Acer Predator XB271HU | OS | Windows 10 |

                                   

                                   

Link to comment
https://linustechtips.com/topic/775954-nvme-drive-boots-slower-than-ssd/
Share on other sites

Link to post
Share on other sites

It takes longer for the PCIE bus to to boot up than the SATA bus. 

PSU Tier List | CoC

Gaming Build | FreeNAS Server

Spoiler

i5-4690k || Seidon 240m || GTX780 ACX || MSI Z97s SLI Plus || 8GB 2400mhz || 250GB 840 Evo || 1TB WD Blue || H440 (Black/Blue) || Windows 10 Pro || Dell P2414H & BenQ XL2411Z || Ducky Shine Mini || Logitech G502 Proteus Core

Spoiler

FreeNAS 9.3 - Stable || Xeon E3 1230v2 || Supermicro X9SCM-F || 32GB Crucial ECC DDR3 || 3x4TB WD Red (JBOD) || SYBA SI-PEX40064 sata controller || Corsair CX500m || NZXT Source 210.

Link to post
Share on other sites

yep exactly the same here. SSD was around 10-15 seconds max, and the NVme is 30+ power to windows.

CPU | Intel i9-10850K | GPU | EVGA 3080ti FTW3 HYBRID  | CASE | Phanteks Enthoo Evolv ATX | PSU | Corsair HX850i | RAM | 2x8GB G.skill Trident RGB 3000MHz | MOTHERBOARD | Asus Z490E Strix | STORAGE | Adata XPG 256GB NVME + Adata XPG 1T + WD Blue 1TB + Adata 480GB SSD | COOLING | Evga CLC280 | MONITOR | Acer Predator XB271HU | OS | Windows 10 |

                                   

                                   

Link to post
Share on other sites

1 minute ago, djdwosk97 said:

It takes longer for the PCIE bus to to boot up than the SATA bus. 

I had a feeling that that was the case, TBH.

CPU | Intel i9-10850K | GPU | EVGA 3080ti FTW3 HYBRID  | CASE | Phanteks Enthoo Evolv ATX | PSU | Corsair HX850i | RAM | 2x8GB G.skill Trident RGB 3000MHz | MOTHERBOARD | Asus Z490E Strix | STORAGE | Adata XPG 256GB NVME + Adata XPG 1T + WD Blue 1TB + Adata 480GB SSD | COOLING | Evga CLC280 | MONITOR | Acer Predator XB271HU | OS | Windows 10 |

                                   

                                   

Link to post
Share on other sites

1 minute ago, done12many2 said:

 

Are you running in UEFI mode?  That'll take care of that long POST and get you back to where you were or better.

I believe so as I can get into uefi bios just fine, m.2 slots are set to pcie and 4x.

CPU | Intel i9-10850K | GPU | EVGA 3080ti FTW3 HYBRID  | CASE | Phanteks Enthoo Evolv ATX | PSU | Corsair HX850i | RAM | 2x8GB G.skill Trident RGB 3000MHz | MOTHERBOARD | Asus Z490E Strix | STORAGE | Adata XPG 256GB NVME + Adata XPG 1T + WD Blue 1TB + Adata 480GB SSD | COOLING | Evga CLC280 | MONITOR | Acer Predator XB271HU | OS | Windows 10 |

                                   

                                   

Link to post
Share on other sites

Just now, done12many2 said:

 

Have you completely disabled Compatibility Mode?  If not, you are not running full UEFI. 

TBH I don't know, apart from the two m.2 options I changed everything else is at factory Asus settings, and the build is all new.

 

CPU | Intel i9-10850K | GPU | EVGA 3080ti FTW3 HYBRID  | CASE | Phanteks Enthoo Evolv ATX | PSU | Corsair HX850i | RAM | 2x8GB G.skill Trident RGB 3000MHz | MOTHERBOARD | Asus Z490E Strix | STORAGE | Adata XPG 256GB NVME + Adata XPG 1T + WD Blue 1TB + Adata 480GB SSD | COOLING | Evga CLC280 | MONITOR | Acer Predator XB271HU | OS | Windows 10 |

                                   

                                   

Link to post
Share on other sites

So I believe I figured out my issue. It seems like once windows is installed these settings cannot be altered, you bust configure these bios settings prior to installing.

CPU | Intel i9-10850K | GPU | EVGA 3080ti FTW3 HYBRID  | CASE | Phanteks Enthoo Evolv ATX | PSU | Corsair HX850i | RAM | 2x8GB G.skill Trident RGB 3000MHz | MOTHERBOARD | Asus Z490E Strix | STORAGE | Adata XPG 256GB NVME + Adata XPG 1T + WD Blue 1TB + Adata 480GB SSD | COOLING | Evga CLC280 | MONITOR | Acer Predator XB271HU | OS | Windows 10 |

                                   

                                   

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×