Wifi Router dieded.

[George_Bud]

My wifi router died yesterday. I tried to install a new firmware but "boom", dead.  So is there any way to make it work again ? This is the router. "Router wireless Netis WF2411, 150Mbps, N"

[Sir Asvald]

Have you tried to reset it? plug in the power and press the reset button for 30 seconds. If that doesn't work then your router is very much dieded.

 

 

[wilamu]

Sounds like you might have bricked it. You might not have been using OpenWrt firmware but is has a unbricking process -https://wiki.openwrt.org/toh/netis/wf-2881

 

It doesn't look easy, someone else unbricked there's here, this looks horrendous: http://nanospic.com/?p=641

[George_Bud]

2 minutes ago, wilamu said:

Sounds like you might have bricked it. You might not have been using OpenWrt firmware but is has a unbricking process -https://wiki.openwrt.org/toh/netis/wf-2881

 

It doesn't look easy, someone else unbricked there's here, this looks horrendous: http://nanospic.com/?p=641

I can probably do it. But I am not sure if I should do it. 

[Native7i]

almost every router have a fail safe boot method. boot on that, probably with some key combo, or you have to dissable the router, set a static ip to pc, use wireshark to find the ip that use fail safe. send stock firmware through telnet or something.

I restored dead Mr3420 by doing this, yep, I did the wrong firmware flash too