Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

usb port problem help please !!

my windows shows some warning and system hangs up on having USB pen drive for too long and system hangs up too one of my PC tuner shows up a certain problem.

any suggestion for correcting this problem ?

 

 

32.jpg

56.jpg

Link to post
Share on other sites

Open Command Prompt in Administrator Mode and run the following command: sfc /scannow and see if it detects any errors. If not, then run the next: chkdsk /F /R and then reboot your PC and let it run. Here is all the commands and options available to you under the chkdsk section. 

 

C:\Windows\system32>help chkdsk
Checks a disk and displays a status report.


CHKDSK [volume[[path]filename]]] [/F] [/V] [/R] [/X] [/I] [/C] [/L[:size]] [/B] [/scan] [/spotfix]


  volume              Specifies the drive letter (followed by a colon),
                      mount point, or volume name.
  filename            FAT/FAT32 only: Specifies the files to check for
                      fragmentation.
  /F                  Fixes errors on the disk.
  /V                  On FAT/FAT32: Displays the full path and name of every
                      file on the disk.
                      On NTFS: Displays cleanup messages if any.
  /R                  Locates bad sectors and recovers readable information
                      (implies /F, when /scan not specified).
  /L:size             NTFS only:  Changes the log file size to the specified
                      number of kilobytes.  If size is not specified, displays
                      current size.
  /X                  Forces the volume to dismount first if necessary.
                      All opened handles to the volume would then be invalid
                      (implies /F).
  /I                  NTFS only: Performs a less vigorous check of index
                      entries.
  /C                  NTFS only: Skips checking of cycles within the folder
                      structure.
  /B                  NTFS only: Re-evaluates bad clusters on the volume
                      (implies /R)
  /scan               NTFS only: Runs a online scan on the volume
  /forceofflinefix    NTFS only: (Must be used with "/scan")
                      Bypass all online repair; all defects found
                      are queued for offline repair (i.e. "chkdsk /spotfix").
  /perf               NTFS only: (Must be used with "/scan")
                      Uses more system resources to complete a scan as fast as
                      possible. This may have a negative performance impact on
                      other tasks running on the system.
  /spotfix            NTFS only: Runs spot fixing on the volume
  /sdcleanup          NTFS only: Garbage collect unneeded security descriptor
                      data (implies /F).
  /offlinescanandfix  Runs an offline scan and fix on the volume.
  /freeorphanedchains FAT/FAT32/exFAT only: Frees any orphaned cluster chains
                      instead of recovering their contents.
  /markclean          FAT/FAT32/exFAT only: Marks the volume clean if no
                      corruption was detected, even if /F was not specified.

The /I or /C switch reduces the amount of time required to run Chkdsk by
skipping certain checks of the volume.

PSU Tier List Thread

Please make sure to Quote me or @ me to see your reply!

 

"White Ice"

Ryzen 7 3700x | Asus Crosshair VIII Hero (Wi-Fi) | EVGA RTX 2080ti | Ballistix 32gb 16-18-16-36 3600mhz | Custom Water Cooling Loop | 1tb Samsung 970 Evo

2tb Crucial MX500 SSD | 2x 3tb Seagate Drive | Fractal Design Meshify S2 |  EVGA G2 750w PSU | 3x Corsair LL140 | 3x Corsair LL120

 

Dedicated Streaming Rig

 Ryzen 7 1800x | Asus B450-F Strix | 32gb Gskill Flare X 3000mhz | Corsair RM550x | EVGA GTX 1060 3gb | 250gb 860 Evo m.2

Phanteks Enthoo Evolv |  Elgato HD60 Pro | Elgato 4k60 Pro mk.2 | Avermedia 4k GC573 Capture Card

 

Link to post
Share on other sites
22 minutes ago, legacy99 said:

Open Command Prompt in Administrator Mode and run the following command: sfc /scannow and see if it detects any errors. If not, then run the next: chkdsk /F /R and then reboot your PC and let it run. Here is all the commands and options available to you under the chkdsk section. 

 

C:\Windows\system32>help chkdsk
Checks a disk and displays a status report.


CHKDSK [volume[[path]filename]]] [/F] [/V] [/R] [/X] [/I] [/C] [/L[:size]] [/B] [/scan] [/spotfix]


  volume              Specifies the drive letter (followed by a colon),
                      mount point, or volume name.
  filename            FAT/FAT32 only: Specifies the files to check for
                      fragmentation.
  /F                  Fixes errors on the disk.
  /V                  On FAT/FAT32: Displays the full path and name of every
                      file on the disk.
                      On NTFS: Displays cleanup messages if any.
  /R                  Locates bad sectors and recovers readable information
                      (implies /F, when /scan not specified).
  /L:size             NTFS only:  Changes the log file size to the specified
                      number of kilobytes.  If size is not specified, displays
                      current size.
  /X                  Forces the volume to dismount first if necessary.
                      All opened handles to the volume would then be invalid
                      (implies /F).
  /I                  NTFS only: Performs a less vigorous check of index
                      entries.
  /C                  NTFS only: Skips checking of cycles within the folder
                      structure.
  /B                  NTFS only: Re-evaluates bad clusters on the volume
                      (implies /R)
  /scan               NTFS only: Runs a online scan on the volume
  /forceofflinefix    NTFS only: (Must be used with "/scan")
                      Bypass all online repair; all defects found
                      are queued for offline repair (i.e. "chkdsk /spotfix").
  /perf               NTFS only: (Must be used with "/scan")
                      Uses more system resources to complete a scan as fast as
                      possible. This may have a negative performance impact on
                      other tasks running on the system.
  /spotfix            NTFS only: Runs spot fixing on the volume
  /sdcleanup          NTFS only: Garbage collect unneeded security descriptor
                      data (implies /F).
  /offlinescanandfix  Runs an offline scan and fix on the volume.
  /freeorphanedchains FAT/FAT32/exFAT only: Frees any orphaned cluster chains
                      instead of recovering their contents.
  /markclean          FAT/FAT32/exFAT only: Marks the volume clean if no
                      corruption was detected, even if /F was not specified.

The /I or /C switch reduces the amount of time required to run Chkdsk by
skipping certain checks of the volume.

WHAT CAN I DO NEXT PLEASE TELL ME

22.jpg

Link to post
Share on other sites
9 hours ago, TanmayHembram said:

WHAT CAN I DO NEXT PLEASE TELL ME

22.jpg

Do the second half of the commands I gave you.

 

 

CHKDSK /F /R

PSU Tier List Thread

Please make sure to Quote me or @ me to see your reply!

 

"White Ice"

Ryzen 7 3700x | Asus Crosshair VIII Hero (Wi-Fi) | EVGA RTX 2080ti | Ballistix 32gb 16-18-16-36 3600mhz | Custom Water Cooling Loop | 1tb Samsung 970 Evo

2tb Crucial MX500 SSD | 2x 3tb Seagate Drive | Fractal Design Meshify S2 |  EVGA G2 750w PSU | 3x Corsair LL140 | 3x Corsair LL120

 

Dedicated Streaming Rig

 Ryzen 7 1800x | Asus B450-F Strix | 32gb Gskill Flare X 3000mhz | Corsair RM550x | EVGA GTX 1060 3gb | 250gb 860 Evo m.2

Phanteks Enthoo Evolv |  Elgato HD60 Pro | Elgato 4k60 Pro mk.2 | Avermedia 4k GC573 Capture Card

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×