Post your Cinebench R20+15+R11.5+2003 Scores **Don't Read The OP PLZ**

[Dabombinable]

BTW, benchmarking a Northwood Pentium 4 is excruciating.

[Jumper118]

1 minute ago, done12many2 said:

 

Now I see what your mean by "ambient."   

this was the only time i benched outside  2500K

2 minutes ago, Dabombinable said:

I might have to make a stop at Bunnings then. Even if I have to go with an external pump, though the hours of expected run time from the pump might drive the cost up a bit.

a pond pump is designed to run 24/7 for the warranty period as long as you keep it under 40c. mine is 3500l/h and was £25. i can push water through 4 gpus and 2 cpus a 1500 or 2000 would be fine for just a cpu and single gpu so you could save even more there.

 

also forgot to pput this here

[done12many2]

2 minutes ago, Jumper118 said:

this was the only time i benched outside  2500K

 

We're getting outside temps as low as -6c already so I might wheel the rig out onto the rear deck and see if I can't break 2000cb on "ambient".    I think a 25c drop in ambient temps might get it done.  

[Jumper118]

14 minutes ago, done12many2 said:

 

We're getting outside temps as low as -6c already so I might wheel the rig out onto the rear deck and see if I can't break 2000cb on "ambient".    I think a 25c drop in ambient temps might get it done.  

well it was only -1c when i benched the 2500K and the top of the res was starting to turn into snow

 

[Poohy14]

Well started to OC my Intel Xeon E5-2670 v3. So far this is what I am at.

Started at 2.3Ghz and now at 2.6Ghz

[Dabombinable]

130nm, 8KB L1+512KB L2 Cache, Pentium 4 HT 3.2GHz:

Spoiler

90nm, 8KB L1+1MB L2 Cache, Pentium 4 540J:

Spoiler

Imagine screwed up during SS-only got half of the screen  Found the non screwed up SS

 

65nm, 16KB L1+2MB L2 Cache, 65W, Pentium 4 631

Spoiler

 

Long story short, Northwood kicks ass against newer Pentium 4 which are manufactured on smaller nodes with only half and a uarter of the cache respectively.

[Dabombinable]

Woot, new benchmarking run. My Core 2 Duo E8500 is working again, the P5k VM didn't kill it!

[Dabombinable]

Double trouble, Core 2 Duo E8500 at stock:

Spoiler

And the first of the 2 Pentium E6500K at the same settings (333MHz FSB+9.5x multiplier)

Spoiler

 

[BULLETBEEF | JA]

well sandy-bridge representing

[Dabombinable]

Is it me, or is my E8500 a really good chip? Just look at that voltage (which is set to auto).

Still can't believe I paid $15 for it.

[Jumper118]

3 hours ago, Dabombinable said:

Is it me, or is my E8500 a really good chip? Just look at that voltage (which is set to auto).

 

Still can't believe I paid $15 for it.

must just be you. it should do 4.5-4.7ghz at that voltage if it was a good chip!

[agent_x007]

Q : Are AM3 CPU's in AM2+ MB's (those with DDR2 memory), listed under AM3/AM3+ section ?

[done12many2]

2 hours ago, Jumper118 said:

must just be you. it should do 4.5-4.7ghz at that voltage if it was a good chip!

 

Way to rain on his parade Jumper.  You are so insensitive.  

[Jumper118]

29 minutes ago, done12many2 said:

 

Way to rain on his parade Jumper.  You are so insensitive.  

i know.  sorry i crushed his hope and dreams of the worlds fastest e8500

31 minutes ago, agent_x007 said:

Q : Are AM3 CPU's in AM2+ MB's (those with DDR2 memory), listed under AM3/AM3+ section ?

yes its the cpu not the motherboard. 

[done12many2]

2 minutes ago, Jumper118 said:

i know.  sorry i crushed his hope and dreams of the worlds fastest e8500

 

Did you sell that 5960x yet?

[Jumper118]

11 minutes ago, done12many2 said:

 

Did you sell that 5960x yet?

Yeah sold it yesterday and got collected today. sad to see it go as it was a good cpu.  

 

I really hope zen can match it or at least bring the price down so much that I can afford to keep it!

 

I have had it 2 weeks and I managed to do 132 submissions on hw with it which means it's my highest subbed cpu. 

[done12many2]

3 minutes ago, Jumper118 said:

Yeah sold it yesterday and got collected today. sad to see it go as it was a good cpu.  

 

I really hope zen can match it or at least bring the price down so much that I can afford to keep it!

 

I have had it 2 weeks and I managed to do 132 submissions on hw with it which means it's my highest subbed cpu. 

 

Sad to hear that man.

 

They are fun though, aren't they.  Well over 50% overclocks and plenty of cores.  They scale very well as you clock them higher too.

 

I think Ryzen is definitely going to help adjust the market, but I don't believe what AMD is trying to convince us at all.  It will most likely be a great chip, but they presented it the way they did for a reason.    Regardless, if it's good, I'm going to build a system with one just because I haven't had an AMD chip in a very long time.

[agent_x007]

1 hour ago, Jumper118 said:

yes its the cpu not the motherboard. 

Interesting... but OK.
Q1: Is there a way to see who used AM2+ MB and who didn't ?
Because, I would like to compare my AM3 in AM2+ MB, but I don't see how I can do that (since there is no AM2+ comment in any score from AM3/AM3+ section) 

[Dabombinable]

4 hours ago, Jumper118 said:

must just be you. it should do 4.5-4.7ghz at that voltage if it was a good chip!

Its on Auto.....its a lazy overclock (plus I'm running it of a 400W PSU which only has 1x SATA connector, and which I suspect is from around 2003-2004, and the PSU gets uite warm, warmer than my other 400W/500W peak PSU).

[Jumper118]

1 hour ago, agent_x007 said:

Interesting... but OK.
Q1: Is there a way to see who used AM2+ MB and who didn't ?
Because, I would like to compare my AM3 in AM2+ MB, but I don't see how I can do that (since there is no AM2+ comment in any score from AM3/AM3+ section) 

i dont think anyone has run an am3+cpu in an am2+ board yet but the only cpu that will benefit are single core and dual core locked chips that need a higher base clock. 

29 minutes ago, Dabombinable said:

Its on Auto.....its a lazy overclock (plus I'm running it of a 400W PSU which only has 1x SATA connector, and which I suspect is from around 2003-2004, and the PSU gets uite warm, warmer than my other 400W/500W peak PSU).

try this. 

turn off all power saving poo

set cpu core to 1.4v

set ram to 2-2.2v

set fsb to 1.38v

set nb to 1.38v

enable LLC 

then see how high it will go. then i shall tell you how good it is. 

[Dabombinable]

2 minutes ago, Jumper118 said:

i dont think anyone has run an am3+cpu in an am2+ board yet but the only cpu that will benefit are single core and dual core locked chips that need a higher base clock. 

try this. 

turn off all power saving poo

set cpu core to 1.4v

set ram to 2-2.2v

set fsb to 1.38v

set nb to 1.38v

enable LLC 

then see how high it will go. then i shall tell you how good it is. 

I'll also install the Coolermaster Eclipse, since I'm running a designed-after-stock cooler of the same age (though that cooler has extremely good mounting pressure+ a copper core-its optimized for Pentium 4 and Conroe dual core however)

[Jumper118]

16 minutes ago, Dabombinable said:

I'll also install the Coolermaster Eclipse, since I'm running a designed-after-stock cooler of the same age (though that cooler has extremely good mounting pressure+ a copper core-its optimized for Pentium 4 and Conroe dual core however)

yeah 1.4v should be fine one dual core even if you are blowing on it with no heatsink  

[Dabombinable]

Just now, Jumper118 said:

yeah 1.4v should be fine one dual core even if you are blowing on it with no heatsink  

At the very least it would cut down the bloody noise, the cooler doesn't have a PWM fan, so its at 100% all the time.

[agent_x007]

42 minutes ago, Jumper118 said:

i dont think anyone has run an am3+cpu in an am2+ board yet but the only cpu that will benefit are single core and dual core locked chips that need a higher base clock.

So I'm the first one to try this ?
Curious
Either way here are my scores :
Phenom II x6 1100T @ 4,2GHz + MA790FX-DQ6 (790FX + SB600 chipset combo, BIOS : F7G).

Cinebench 2003 :


Cinebench R11.5 :


Cinebench R15 :

[Jumper118]

1 minute ago, agent_x007 said:

So I'm the first one to try this ?
Curious
Either way here are my scores :
Phenom II x6 1100T @ 4,2GHz + MA790FX-DQ6 (790FX + SB600 chipset combo, BIOS : F7G).

Cinebench 2003 :


Cinebench R11.5 :


Cinebench R15 :
 

well i had one for a while but it was slower than my cvfz so i sold it.