Jump to content

1020 FPS in game -will that damage my gpu or my 60 hz monitor ?

maria2244

there is a game whenever I start it

I get 1000 fps according to msi afterburner and rivatuner and I need to go to settings and turn on vsyng then it gets back to 60 fps

the proplem that game does not remember settings

so every time I turn it on I get 1000 fps

I'm MARIA 23 years old Girl (Female) .

Christmas is all about hope , and that hope is NOT possible without JESUS king of kings . I love Christmas .

Link to comment
Share on other sites

Link to post
Share on other sites

You don't  have to enable Vsync, only do that when you get tearing. And no, you are fine.

Gaming HTPC:

R5 5600X - Cryorig C7 - Asus ROG B350-i - EVGA RTX2060KO - 16gb G.Skill Ripjaws V 3333mhz - Corsair SF450 - 500gb 960 EVO - LianLi TU100B


Desktop PC:
R9 3900X - Peerless Assassin 120 SE - Asus Prime X570 Pro - Powercolor 7900XT - 32gb LPX 3200mhz - Corsair SF750 Platinum - 1TB WD SN850X - CoolerMaster NR200 White - Gigabyte M27Q-SA - Corsair K70 Rapidfire - Logitech MX518 Legendary - HyperXCloud Alpha wireless


Boss-NAS [Build Log]:
R5 2400G - Noctua NH-D14 - Asus Prime X370-Pro - 16gb G.Skill Aegis 3000mhz - Seasonic Focus Platinum 550W - Fractal Design R5 - 
250gb 970 Evo (OS) - 2x500gb 860 Evo (Raid0) - 6x4TB WD Red (RaidZ2)

Synology-NAS:
DS920+
2x4TB Ironwolf - 1x18TB Seagate Exos X20

 

Audio Gear:

Hifiman HE-400i - Kennerton Magister - Beyerdynamic DT880 250Ohm - AKG K7XX - Fostex TH-X00 - O2 Amp/DAC Combo - 
Klipsch RP280F - Klipsch RP160M - Klipsch RP440C - Yamaha RX-V479

 

Reviews and Stuff:

GTX 780 DCU2 // 8600GTS // Hifiman HE-400i // Kennerton Magister
Folding all the Proteins! // Boincerino

Useful Links:
Do you need an AMP/DAC? // Recommended Audio Gear // PSU Tier List 

Link to comment
Share on other sites

Link to post
Share on other sites

10 hours ago, FloRolf said:

You don't  have to enable Vsync, only do that when you get tearing. And no, you are fine.

 

10 hours ago, I need a better name said:

No

thanks

but 1000 fps to 60hz monitor is not bad ??

I'm MARIA 23 years old Girl (Female) .

Christmas is all about hope , and that hope is NOT possible without JESUS king of kings . I love Christmas .

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, maria2244 said:

 

thanks

but 1000 fps to 60hz monitor is not bad ??

no

Gaming HTPC:

R5 5600X - Cryorig C7 - Asus ROG B350-i - EVGA RTX2060KO - 16gb G.Skill Ripjaws V 3333mhz - Corsair SF450 - 500gb 960 EVO - LianLi TU100B


Desktop PC:
R9 3900X - Peerless Assassin 120 SE - Asus Prime X570 Pro - Powercolor 7900XT - 32gb LPX 3200mhz - Corsair SF750 Platinum - 1TB WD SN850X - CoolerMaster NR200 White - Gigabyte M27Q-SA - Corsair K70 Rapidfire - Logitech MX518 Legendary - HyperXCloud Alpha wireless


Boss-NAS [Build Log]:
R5 2400G - Noctua NH-D14 - Asus Prime X370-Pro - 16gb G.Skill Aegis 3000mhz - Seasonic Focus Platinum 550W - Fractal Design R5 - 
250gb 970 Evo (OS) - 2x500gb 860 Evo (Raid0) - 6x4TB WD Red (RaidZ2)

Synology-NAS:
DS920+
2x4TB Ironwolf - 1x18TB Seagate Exos X20

 

Audio Gear:

Hifiman HE-400i - Kennerton Magister - Beyerdynamic DT880 250Ohm - AKG K7XX - Fostex TH-X00 - O2 Amp/DAC Combo - 
Klipsch RP280F - Klipsch RP160M - Klipsch RP440C - Yamaha RX-V479

 

Reviews and Stuff:

GTX 780 DCU2 // 8600GTS // Hifiman HE-400i // Kennerton Magister
Folding all the Proteins! // Boincerino

Useful Links:
Do you need an AMP/DAC? // Recommended Audio Gear // PSU Tier List 

Link to comment
Share on other sites

Link to post
Share on other sites

Link to comment
Share on other sites

Link to post
Share on other sites

Lol, no. There are some games I play that, if I turn off V-sync, it says I'm cranking out over 2000 FPS. Your GPU will only crank out as much as it can and will automatically limit itself, and you monitor will only use what it needs and dump the rest into the ether.

END OF LINE

-- Project Deep Freeze Build Log --

Quote me so that I always know when you reply, feel free to snip if the quote is long. May your FPS be high and your temperatures low.

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, Majestic said:

The card will draw lots of power and it will get hot. But it should be built for it.

 

That coilwhine though.

^this

6 minutes ago, maria2244 said:

 

thanks

but 1000 fps to 60hz monitor is not bad ??

The monitor will only ask for a new image every 1/60th of a second (so 60 times per second) no matter if you get 60fps, 30fps or 1000fps. it wont damage the screen.

"We're all in this together, might as well be friends" Tom, Toonami.

 

mini eLiXiVy: my open source 65% mechanical PCB, a build log, PCB anatomy and discussing open source licenses: https://linustechtips.com/topic/1366493-elixivy-a-65-mechanical-keyboard-build-log-pcb-anatomy-and-how-i-open-sourced-this-project/

 

mini_cardboard: a 4% keyboard build log and how keyboards workhttps://linustechtips.com/topic/1328547-mini_cardboard-a-4-keyboard-build-log-and-how-keyboards-work/

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, maria2244 said:

 

thanks

but 1000 fps to 60hz monitor is not bad ??

not bad at all, the monitor caps it out at 60hz so you good.

Link to comment
Share on other sites

Link to post
Share on other sites

monitor will be just fine

however, you might hear coil whine from GPU

 

But that won't dammage your card.

Intel i7 12700K | Gigabyte Z690 Gaming X DDR4 | Pure Loop 240mm | G.Skill 3200MHz 32GB CL14 | CM V850 G2 | RTX 3070 Phoenix | Lian Li O11 Air mini

Samsung EVO 960 M.2 250GB | Samsung EVO 860 PRO 512GB | 4x Be Quiet! Silent Wings 140mm fans

WD My Cloud 4TB

Link to comment
Share on other sites

Link to post
Share on other sites

Not a problem at all but you can limit the FPS to 60Hz which will use much less GPU power and produce less heat (helps a lot in the summer). As far as I know there's really no advantage to rendering more frames than you need other than for benchmarking your card or bragging rights. Since I usually use v-sync (I don't have an issue with latency like some competitive gamers), my card automatically caps my fps to my monitors refresh rate.

Primary PC-

CPU: Intel i7-6800k @ 4.2-4.4Ghz   CPU COOLER: Bequiet Dark Rock Pro 4   MOBO: MSI X99A SLI Plus   RAM: 32GB Corsair Vengeance LPX quad-channel DDR4-2800  GPU: EVGA GTX 1080 SC2 iCX   PSU: Corsair RM1000i   CASE: Corsair 750D Obsidian   SSDs: 500GB Samsung 960 Evo + 256GB Samsung 850 Pro   HDDs: Toshiba 3TB + Seagate 1TB   Monitors: Acer Predator XB271HUC 27" 2560x1440 (165Hz G-Sync)  +  LG 29UM57 29" 2560x1080   OS: Windows 10 Pro

Album

Other Systems:

Spoiler

Home HTPC/NAS-

CPU: AMD FX-8320 @ 4.4Ghz  MOBO: Gigabyte 990FXA-UD3   RAM: 16GB dual-channel DDR3-1600  GPU: Gigabyte GTX 760 OC   PSU: Rosewill 750W   CASE: Antec Gaming One   SSD: 120GB PNY CS1311   HDDs: WD Red 3TB + WD 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200 -or- Steam Link to Vizio M43C1 43" 4K TV  OS: Windows 10 Pro

 

Offsite NAS/VM Server-

CPU: 2x Xeon E5645 (12-core)  Model: Dell PowerEdge T610  RAM: 16GB DDR3-1333  PSUs: 2x 570W  SSDs: 8GB Kingston Boot FD + 32GB Sandisk Cache SSD   HDDs: WD Red 4TB + Seagate 2TB + Seagate 320GB   OS: FreeNAS 11+

 

Laptop-

CPU: Intel i7-3520M   Model: Dell Latitude E6530   RAM: 8GB dual-channel DDR3-1600  GPU: Nvidia NVS 5200M   SSD: 240GB TeamGroup L5   HDD: WD Black 320GB   Monitor: Samsung SyncMaster 2693HM 26" 1920x1200   OS: Windows 10 Pro

Having issues with a Corsair AIO? Possible fix here:

Spoiler

Are you getting weird fan behavior, speed fluctuations, and/or other issues with Link?

Are you running AIDA64, HWinfo, CAM, or HWmonitor? (ASUS suite & other monitoring software often have the same issue.)

Corsair Link has problems with some monitoring software so you may have to change some settings to get them to work smoothly.

-For AIDA64: First make sure you have the newest update installed, then, go to Preferences>Stability and make sure the "Corsair Link sensor support" box is checked and make sure the "Asetek LC sensor support" box is UNchecked.

-For HWinfo: manually disable all monitoring of the AIO sensors/components.

-For others: Disable any monitoring of Corsair AIO sensors.

That should fix the fan issue for some Corsair AIOs (H80i GT/v2, H110i GTX/H115i, H100i GTX and others made by Asetek). The problem is bad coding in Link that fights for AIO control with other programs. You can test if this worked by setting the fan speed in Link to 100%, if it doesn't fluctuate you are set and can change the curve to whatever. If that doesn't work or you're still having other issues then you probably still have a monitoring software interfering with the AIO/Link communications, find what it is and disable it.

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×