Jump to content

why there are two longer standoffs already installed in cooler master case 5?

s_technogeek
 Share
Go to solution Solved by airdeano,

those are hollow locating dowels. you are good to install.

Posted

i have just bought a cooler master case pro 5 , when installing the standoffs for the full atx motherboard , i noticed the two standoffs which are already came installed in the case are slightly longer than the ones which came in the box! 

 

Any reason why is it so????

 

please help ASAP!

My Build:
 CPU - i7-4790k @ 4.7ghz (overclocked) at 1.328v
 Ram - 16GB Corsair Vengeance DDR3 (overclocked)
 Motherboard - Asus Republic Of Gamers (ROG) Maximus VII Hero
 Cpu Cooler - Corsair H100i GTX Liquid cooler, Noctua NH-D15 Air cooler
 Case - Cooler Master MasterCase Pro 5
 PSU - Corsair Rm1000 Gold Certified
 SSD - Samsung 850pro 256GB SSD
 HDD - 1x WD Black 4TB/256mb cache, 2x Seagate Barracuda 2TB HDD
 GPU - Zotac Gtx 1080Ti Amp! Extreme! edition
 Keyboard - HyperX Alloy mechanical_Cherry-MX RED (main) , Asus Cerberus (secondary)
 Mouse - Logitech G403 Prodigy (Main) , Razer Deathadder 2013(secondary), Logitech m235 wireless mouse (secondary)
 Mouse pad - Razer Gigantus (Main) CM-Storm Swift-RX (secondary), Steelseries Qck (secondary)
 Mic - Blue Snowball ICE
 Headphones - HyperX Cloud Core
 Monitor - Acer Predator XB271HU 2560x1440 144hz Gsync (Main), Dell S2216H 1920x1080 60hz (secondary)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Are they standoffs that you put a screw in or do they have a nub at the top like this?

 

230t_int_standoffnub-645x405.jpg

 

If it's like that then the nub at the top goes through the hole on your motherboard, you don't screw anything into it. It's there to help keep the motherboard in place while you screw in the other standoffs that need screwing in. I haven't heard of a case having 2 of these though.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

i have just bought a cooler master case pro 5 , when installing the standoffs for the full atx motherboard , i noticed the two standoffs which are already came installed in the case are slightly longer than the ones which came in the box! 

 

Any reason why is it so????

 

please help ASAP!

the top left one and one below it(sorry the picture is not so clear)

20151228_230011_1.jpg

My Build:
 CPU - i7-4790k @ 4.7ghz (overclocked) at 1.328v
 Ram - 16GB Corsair Vengeance DDR3 (overclocked)
 Motherboard - Asus Republic Of Gamers (ROG) Maximus VII Hero
 Cpu Cooler - Corsair H100i GTX Liquid cooler, Noctua NH-D15 Air cooler
 Case - Cooler Master MasterCase Pro 5
 PSU - Corsair Rm1000 Gold Certified
 SSD - Samsung 850pro 256GB SSD
 HDD - 1x WD Black 4TB/256mb cache, 2x Seagate Barracuda 2TB HDD
 GPU - Zotac Gtx 1080Ti Amp! Extreme! edition
 Keyboard - HyperX Alloy mechanical_Cherry-MX RED (main) , Asus Cerberus (secondary)
 Mouse - Logitech G403 Prodigy (Main) , Razer Deathadder 2013(secondary), Logitech m235 wireless mouse (secondary)
 Mouse pad - Razer Gigantus (Main) CM-Storm Swift-RX (secondary), Steelseries Qck (secondary)
 Mic - Blue Snowball ICE
 Headphones - HyperX Cloud Core
 Monitor - Acer Predator XB271HU 2560x1440 144hz Gsync (Main), Dell S2216H 1920x1080 60hz (secondary)

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Power Supplies

×