Jump to content

usb over current statuc detected. Problem please help.

Microwilli
By Microwilli
in Troubleshooting
 Share
Go to solution Solved by BroKenFingers,

there are lots of hits about the trouble you are having..you are not alone. Some say clean the crud ( favorite tech term ) from all the USB ports..others say it is a MB to case short..

.do you have a PS/2 KB to try ?

.there is a jumper for ..power to KB ..what ever that means..

Sorry this looks like one of those "try this and see what happens.." 

Keep at it..have you tried with the OB GPU only..?

Posted

hey there,

ive just built my lan pc with my old parts:

phenom II x6 1055t

4gb ram

asus mm68t or something like that (its some asus board with an nvidia nforce 630 chipset)

1500gb seagate hdd

850 w xilence power supply

gtx 260

nzxt vulcan

i was getting that wierd issue one time before but it just went away magicly :D , bit now i dont know what i could do i allready tried removing expansion cards, usb ports replacing ram, taking out the board and trying it on a motherboard box and it doesnt work :(

so i would really apriciate your help

greetings from germany, willi

My Pc: Intel I7 920 @3.0GHZ; 1.024V /Arctic freezer 7 / GTX 280 @stock; 0.938v; Gtx 280 @400/800/550; 0.8V; soon: 8800gts; gt730 /6x2GB 1333 @1430mhz/ 2x 250gb WD 7200rpm Raid0; 1500GB Seagate HDD / Be quiet L8 500w / Gigabyte X58a-OC  / Sharkoon T28 Green

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Greetings from Canada..

You have this error : USB over current status  detected

Do you have this from your operating system or from a game or from the POST screen ?

Would like to know what OS you use, what USB devices you have this error with, and the exact Motherboard from ASUS you have..

Does this cause the computer to stop, or to freeze, or to just be a pain..

Your best effort is the easiest thing to give to someone else..

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

im getting the issue when posting (i cant go to the bios because my keyboard wont be found :( ) im using windows 8 and the error doesnt even stop when i unplug every usb device and my mainboard is an asus m4n68t-m le

and it causes my computer to just shut down after 15 seconds

My Pc: Intel I7 920 @3.0GHZ; 1.024V /Arctic freezer 7 / GTX 280 @stock; 0.938v; Gtx 280 @400/800/550; 0.8V; soon: 8800gts; gt730 /6x2GB 1333 @1430mhz/ 2x 250gb WD 7200rpm Raid0; 1500GB Seagate HDD / Be quiet L8 500w / Gigabyte X58a-OC  / Sharkoon T28 Green

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Ok..have you reset your BIOS..?

Do you have your manual.? ..there are 2 sets of jumpers that set the system to wake up with USB inputs..have a look at these, will not hurt to change what is there..just to see what happens..

This was before the Windows 8 was installed..?

Your best effort is the easiest thing to give to someone else..

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

yes ive reset my bios

i allready changed around the jumpers didnt make any diffrence

the mainboard did work with windows 8 until i tried to build my lan pc with the gtx 260 wich i didnt use before i ordered it on ebay but on my gigabyte board it works all fine so its a mainboard issue i guess

My Pc: Intel I7 920 @3.0GHZ; 1.024V /Arctic freezer 7 / GTX 280 @stock; 0.938v; Gtx 280 @400/800/550; 0.8V; soon: 8800gts; gt730 /6x2GB 1333 @1430mhz/ 2x 250gb WD 7200rpm Raid0; 1500GB Seagate HDD / Be quiet L8 500w / Gigabyte X58a-OC  / Sharkoon T28 Green

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Solution

there are lots of hits about the trouble you are having..you are not alone. Some say clean the crud ( favorite tech term ) from all the USB ports..others say it is a MB to case short..

.do you have a PS/2 KB to try ?

.there is a jumper for ..power to KB ..what ever that means..

Sorry this looks like one of those "try this and see what happens.." 

Keep at it..have you tried with the OB GPU only..?

Your best effort is the easiest thing to give to someone else..

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

it cant be a case-board short, i allready tried it outside of the case as said

unfortunately i dont have a ps2 keyboard

o.O i dont think there is a jumper like that i only see 4 and ive changed them around as i said

no problem at least i get help from somebody ;)

ove tried onboard allready... all the same :(

well im not even gettin a post screen like wheres shown the name of the board and how to get into bios and stuff it jumps strait to the screen with the error, thats the screen btw where is displayed when you dont hav your cpu fan plugged in correctly for example

My Pc: Intel I7 920 @3.0GHZ; 1.024V /Arctic freezer 7 / GTX 280 @stock; 0.938v; Gtx 280 @400/800/550; 0.8V; soon: 8800gts; gt730 /6x2GB 1333 @1430mhz/ 2x 250gb WD 7200rpm Raid0; 1500GB Seagate HDD / Be quiet L8 500w / Gigabyte X58a-OC  / Sharkoon T28 Green

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

..Where it says.."Hit F1 to continue"..?..If so then that is a POST screen..just before your system looks for a bootable drive..

...look in the upper left hand section on your MB..on the edge of the board in line with the PS/2 KB and PS/2 mouse connector..this is where the power to KB jumper is said to be..jumper over pins 1-2 is default +5v

Anyway..a USB to PS/2 adapter may allow a USB KB to be used, away from the USB ports..but that still may not fix the trouble..have you had a chance to inspect each USB port for damage..including any USB MB headers for bent pins..?

Your best effort is the easiest thing to give to someone else..

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

no only the error is shown. its like the screen turns on and the error appears and it says no keyboard detected even if i have plugged in one :(
well there was a slightli bent pin but that wasnt the issue and i tried it with the jumper allready i tried it with 5vsb and 5v+

but for some reason even ma main pc has an error now its not able to find any drives while booting and the blinking underscore in the top left corner :(

i guess i have a bad luck day today :(

 

okay i guess the issue with my main pc has solved itself :D

My Pc: Intel I7 920 @3.0GHZ; 1.024V /Arctic freezer 7 / GTX 280 @stock; 0.938v; Gtx 280 @400/800/550; 0.8V; soon: 8800gts; gt730 /6x2GB 1333 @1430mhz/ 2x 250gb WD 7200rpm Raid0; 1500GB Seagate HDD / Be quiet L8 500w / Gigabyte X58a-OC  / Sharkoon T28 Green

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Main system is OK !!

LOL...phew..had me worried that all the magic smoke had left your systems....

Well..lets pull all the PSU cables, pullout the CMOS batt.for 10 min.reconnect all power cables..but NO USB devices..and reboot.

IF that is still a no go ..you may need to swap in another PSU , and check that.. 

Your best effort is the easiest thing to give to someone else..

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

tried it allready :( but the other psu i have is the same :D because i got 50 percent off one so that wouldnt make a diffrence :D

thats the reason why i ve got an 850 watt psu in my lan rig ;)

but odly enough the board doesnt shut itself down when no cpu installed ( but i dont get a post either )

and the problem with my main pc appeared again now i cant hit f12 because the f keys arent detected but i can get in the bios. and sometimes the pc starts but i get a no post and the gpu fan just randomly ramps up and down every 10 seconds or so o.O

My Pc: Intel I7 920 @3.0GHZ; 1.024V /Arctic freezer 7 / GTX 280 @stock; 0.938v; Gtx 280 @400/800/550; 0.8V; soon: 8800gts; gt730 /6x2GB 1333 @1430mhz/ 2x 250gb WD 7200rpm Raid0; 1500GB Seagate HDD / Be quiet L8 500w / Gigabyte X58a-OC  / Sharkoon T28 Green

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Sounds like a handful...is the main system using the same PSU as your Lan system..?

Your best effort is the easiest thing to give to someone else..

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

yes it does but thats the first time thatt issue appeared

My Pc: Intel I7 920 @3.0GHZ; 1.024V /Arctic freezer 7 / GTX 280 @stock; 0.938v; Gtx 280 @400/800/550; 0.8V; soon: 8800gts; gt730 /6x2GB 1333 @1430mhz/ 2x 250gb WD 7200rpm Raid0; 1500GB Seagate HDD / Be quiet L8 500w / Gigabyte X58a-OC  / Sharkoon T28 Green

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

May need to adjust you overclock..? 

Your best effort is the easiest thing to give to someone else..

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

i dont have an overclock and i cant get into bios anyways :/ and i resetted my bios allready so the settings are at stock anyways

well, maybe i just should get a new motherboard :/ its pretty old anyways so i should have upgraded it before. but as long at it was functioning it was all okay :D

do you know a good am3 /am3+ board in matx format for up to 60 euros or 70 dollars i guess ?? :)

My Pc: Intel I7 920 @3.0GHZ; 1.024V /Arctic freezer 7 / GTX 280 @stock; 0.938v; Gtx 280 @400/800/550; 0.8V; soon: 8800gts; gt730 /6x2GB 1333 @1430mhz/ 2x 250gb WD 7200rpm Raid0; 1500GB Seagate HDD / Be quiet L8 500w / Gigabyte X58a-OC  / Sharkoon T28 Green

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I do not know of any am3/am3+ mATX boards off hand..they all seem to be pushed aside for the FM2 package these days...I could only see a few ASUS boards on the Newegg sites..but they used the 970 chipset..You want the am3/am3+ for your CPU..?

Your best effort is the easiest thing to give to someone else..

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

of course because i want to use my old cpu and so i dont have to buy a new one

i know there are not very many but i took a closer look at the gigabyte 78mnt-s2p or something like that its the one with the better vrms and the heatsinks its like 50 euros here the only problem is, that its only a 780 chipset :/

My Pc: Intel I7 920 @3.0GHZ; 1.024V /Arctic freezer 7 / GTX 280 @stock; 0.938v; Gtx 280 @400/800/550; 0.8V; soon: 8800gts; gt730 /6x2GB 1333 @1430mhz/ 2x 250gb WD 7200rpm Raid0; 1500GB Seagate HDD / Be quiet L8 500w / Gigabyte X58a-OC  / Sharkoon T28 Green

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

That is what I have found as well...not very many around and what is there..well not the best specs..May have better luck with a ATX form factor..?

Had a look for that Gigabyte board..only thing I saw was a 68mt...but that has a nVidia chipset...something to avoid..

Your best effort is the easiest thing to give to someone else..

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

well the gigabyte board does have an amd chipset and its for a lan pc so i want an matx board

My Pc: Intel I7 920 @3.0GHZ; 1.024V /Arctic freezer 7 / GTX 280 @stock; 0.938v; Gtx 280 @400/800/550; 0.8V; soon: 8800gts; gt730 /6x2GB 1333 @1430mhz/ 2x 250gb WD 7200rpm Raid0; 1500GB Seagate HDD / Be quiet L8 500w / Gigabyte X58a-OC  / Sharkoon T28 Green

 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×