4ghz overclock club

[tYSON2295]

70c under 100% load in prime 95 with stock intel cooler

:) can't go any further with this mobo sadly had it at 4.4ghz with 74c but it crashed the system since i can't change the vcore on the gigabyte z77m d3h this is my first build built it 3 days ago and already OC never OC'd before this but not that hard as i got it to 4.2 with stock cooler :) getting a z77x d3h so i can change the vcore and get it to 4.4-4.6Ghz with a antec kohler 620 maybe go beyond 4.8Ghz seeing as my i5 is handleing shit well at 4.2Ghz at the stock voltage no errors on prime 95 for 24 hours so seems it could handle it

[NOT_Crazy_Russian]

I know I mentioned I clock at 4.22, here's the proof :P

btw, is 58 degrees good or bad?

Sorry, noob here

[Corvus]

New member here then! ;)

Stable overclock @4.2Ghz, tested it in prime95 for 24 hours and ended up with no errors. (yey)

The temperature is about 66 degrees Celsius under full load. (I'm using the Dark Rock PRO 2 cpu cooler, not the best but clearly not the worst either.)

Love seeing all those overclocked Cpu's btw. :)

[Chris_nz]

Mine it's stable at 4,0 ghz...At least that's what I think.The temps are going crazy!!

Do you have service pack 1? cause i dont see it there.

[Headline]

Cant get the i7-3820 any farther. Any ideas?

It is limited to 4.3 GHz. If I raise the bus speed will that help?

[Chris_nz]

CPU: AMD FX 8120 @ 4.7 Gigglehertz xP

[Chris_nz]

CPU: AMD FX 8120 @ 4.7 Gigglehertz xP

idk how to make the picture bigger :S

[ryanshimia]

4.2-4.8 is a piece of cake on a 3570k.

[Kilmer02]

4.7 3570k H70 Water cooler aiming for 5 GHz with some very black magic tweaking

4.9 unstable P95 would not open up. increased the voltage to 1.475 and got P95 to start running but it crashed after 20 seconds

5002 not able to validate, crashed as cpu-z opened memory is retarded. tried everything but just wont work.

[vanwazltoff]

4.2-4.8 is a piece of cake on a 3570k.

not really, not all 3570ks are built equal, most cant get over 4.5, if they do they really have to crank up the voltage

[R1zzal]

I have an AMD FX 4100 overclocked at 4.6GHz (Full specs below)

The thing is; I have had this frequency for a while now and wanted to push it a bit further as my temps are quite low (40 -50 C under load)

I game, render and edit videos and all is fine, however I was running Prime95 earlier and the worker threads encountered an error on the 3rd core

This only happens with stress tests, also the core clocks seem to dip sequentially.

System spec:

AMD FX 4100 @4.6GHz (Cooled with a Corsair H60)

AMD 6870

OCZ Agility 3 120GB

1TB 7200RPM storage drive

8GB DDR3 1333Mhz PYN RAM

Asus M5A78L -M LX

Evo Labbs 750 Watt PSU

P.S. In the picture it says 4.7GHz however, I had to scale back to 4.60. For now anyway ;)

On CPU-z it's saying my Core voltage is 1.476

NB, SB, HT, RAM all at defaults as far as I know, any help and/or guidance is appreciated

Thanks

- Rizz

Well, mine copes just fine :)

[Masticko]

here is my baby...cooled by h60 (soon to be h100i) hope you like it!

[skitz9417]

here is my baby...cooled by h60 (soon to be h100i) hope you like it!

nice work mate

[cxz]

My ageing Phenom II, this is my limitation using two GT-15`s on H70, i get better temps using the stock fans at the cost of noise.

Wow how is that thing so cool? I must of done something wrong with my first build lol.

[Andriko]

I used to have my 3570k @ 4.7GHz, I'll re-overclock and upload results later

0_0 how did you cool it? And temps?

[Oisin Maguire]

Cant get the i7-3820 any farther. Any ideas?

1.256 volts is stock with that cpu, up the voltage and it will be stable at higher frequencies

[Oisin Maguire]

I don't think I intentionally overclocked my CPU. I have a 3570K which was maxing out at 3.8 in Intel Turbo mode, then went into the bios and did something apparently, I don't even know, and now under heavy load like video encoding, it maxes out at 4.22Ghz.

you probly turned off intel turbo boast and turned on the manufacturers turbo i know msi, asus, gigabyte etc all have the one click overclock

[Dimensionz]

2500k 4.5GHz have to go up to 1.352v though..

doesnt run to hot considering im in the middle of an Australian summer.

[Exitium]

My 2600K that i promised I'd get here once i get it: [ATTACH=CONFIG]n2094[/ATTACH]

[liveturbo24]

My first time overchocking prime95 for 8hrs everything is stable. Don't think I need to go longer unless I got higher overclock. What to try a safe overclock for my first time. Maybe down the road I'll crank it up higher.

3570k at 4.2Ghz at 1.080v

H100i fans set at 40% 1,264rpm SP120s(loud getting NF-F12s tomorrow)

[Feen1_So-Cal]

what do you think????

[Froggy]

i got a phenom ii x4 to 8.125 ghz on air cooling o_O ..... it wasn't even near stable :P lasted about 15 seconds

[RMS-Warrior]

Running my trusted old phenom 2 x4 955 black edition at 4.1ghz, under a corsair h70.

[skitz9417]

Running my trusted old phenom 2 x4 955 black edition at 4.1ghz, under a corsair h70.

nice work are u running push\pull config on ur h70 i have a h60 and the same cpu overclocked to 3.8ghz and whats ur fans

[skitz9417]

nice work people keep them coming