Jump to content

Piece out my PC or sell?

So I am doing a new build in a few months around haswell. Here are my specs:

I7-2600k

Evo 212

DVD-RW

2x4gb ddr3 1600mhz

Samsung 840 pro 128gb

Ocz vertex 3 120gb

Hd 7950 vapor x

Gx 650w 80+ bronze

Gigabyte z68

Haf 932

I would reuse the case, dvd and 840 pro if I owner it out. Here is the going rates of these items used on ebay.

I7-2600k: 250

Hd 7950 vapor x: 275

Ocz vertex 3: 80

Gx 650: 50

Ram: 40

Mobo: 60

I'm not entirely sure I'd get 300 more as a whole unit. Remember case+ optical replacement cost and shipping can b 100+

Specs: Core I7-2600K @ 4.5GHz @ 1.35V, 4x4GB Corsair Vengeance Black 1600MHz CL9, Cooler Master Evo 212, MSI Z77 Mpower Motherboard, Sapphire Radeon HD 7950 Vapor-X @ 1000/1400, Cooler Master HAF 932 Blue Edition w/ 3 Cougar Hydraulic Bearing 120MM fans (2 up top 1 in the bottom) replaced side panel with a window, and rear fan with a Cougar Hydraulic Bearing 140MM, Cooler Master GX 650 80+ Bronze PSU, Samsung DVD-RW, Samsung 840 Pro 128GB SSD, Seagate 750GB SATA III 7200RPM

 

Link to comment
Share on other sites

Link to post
Share on other sites

keep it as a backup rig/parts

Main Rig: CPU: 3570k Mobo: ga-z77x-ud5h-wb :RAM: 8gb kingson ddr3 1600 :gpu crossfire amd 290's Case: zalman z9 plus Cooler: h80i p/p SSD: nutron 120gb HDD: 2tb wd green 4tb seagate desktop                                              

Girlfirends: CPU: 8350 Mobo 990fxa-ud3 Ram 8gb kingson ddr3 1600 gpu: his 7850 case: inwin dragon rider SSD: nutron 120gb HDD: 2tb seagate                                                                                                                                         

                                                                                                                                                                                                                                                                                                                                                                                                                  

Link to comment
Share on other sites

Link to post
Share on other sites

keep it as a backup rig/parts

Need the money to fund next build.

Specs: Core I7-2600K @ 4.5GHz @ 1.35V, 4x4GB Corsair Vengeance Black 1600MHz CL9, Cooler Master Evo 212, MSI Z77 Mpower Motherboard, Sapphire Radeon HD 7950 Vapor-X @ 1000/1400, Cooler Master HAF 932 Blue Edition w/ 3 Cougar Hydraulic Bearing 120MM fans (2 up top 1 in the bottom) replaced side panel with a window, and rear fan with a Cougar Hydraulic Bearing 140MM, Cooler Master GX 650 80+ Bronze PSU, Samsung DVD-RW, Samsung 840 Pro 128GB SSD, Seagate 750GB SATA III 7200RPM

 

Link to comment
Share on other sites

Link to post
Share on other sites

slowly build ur new build? i personly only buy like 1 or 2 parts each paycheque thats how i can hove so many systems i dont have to resell them to get a new one my personal opinion

Main Rig: CPU: 3570k Mobo: ga-z77x-ud5h-wb :RAM: 8gb kingson ddr3 1600 :gpu crossfire amd 290's Case: zalman z9 plus Cooler: h80i p/p SSD: nutron 120gb HDD: 2tb wd green 4tb seagate desktop                                              

Girlfirends: CPU: 8350 Mobo 990fxa-ud3 Ram 8gb kingson ddr3 1600 gpu: his 7850 case: inwin dragon rider SSD: nutron 120gb HDD: 2tb seagate                                                                                                                                         

                                                                                                                                                                                                                                                                                                                                                                                                                  

Link to comment
Share on other sites

Link to post
Share on other sites

Why not just get a new mobo and cpu? everything else you have is great.

“Snorting instant coffee is the best,” said Kayla Johns, 19, of Portland.

Link to comment
Share on other sites

Link to post
Share on other sites

I'm a student on unemployment so I can't justify 2 grand but around half that I can. I plan to build it, then water cool it.

Specs: Core I7-2600K @ 4.5GHz @ 1.35V, 4x4GB Corsair Vengeance Black 1600MHz CL9, Cooler Master Evo 212, MSI Z77 Mpower Motherboard, Sapphire Radeon HD 7950 Vapor-X @ 1000/1400, Cooler Master HAF 932 Blue Edition w/ 3 Cougar Hydraulic Bearing 120MM fans (2 up top 1 in the bottom) replaced side panel with a window, and rear fan with a Cougar Hydraulic Bearing 140MM, Cooler Master GX 650 80+ Bronze PSU, Samsung DVD-RW, Samsung 840 Pro 128GB SSD, Seagate 750GB SATA III 7200RPM

 

Link to comment
Share on other sites

Link to post
Share on other sites

Aesthetics, and power. Hd 7950 oc'ed isn't enough, system is too loud, and not powerful enough for what I need.

Specs: Core I7-2600K @ 4.5GHz @ 1.35V, 4x4GB Corsair Vengeance Black 1600MHz CL9, Cooler Master Evo 212, MSI Z77 Mpower Motherboard, Sapphire Radeon HD 7950 Vapor-X @ 1000/1400, Cooler Master HAF 932 Blue Edition w/ 3 Cougar Hydraulic Bearing 120MM fans (2 up top 1 in the bottom) replaced side panel with a window, and rear fan with a Cougar Hydraulic Bearing 140MM, Cooler Master GX 650 80+ Bronze PSU, Samsung DVD-RW, Samsung 840 Pro 128GB SSD, Seagate 750GB SATA III 7200RPM

 

Link to comment
Share on other sites

Link to post
Share on other sites

what do you do? the 2500k is still a verry nice prossesser

Main Rig: CPU: 3570k Mobo: ga-z77x-ud5h-wb :RAM: 8gb kingson ddr3 1600 :gpu crossfire amd 290's Case: zalman z9 plus Cooler: h80i p/p SSD: nutron 120gb HDD: 2tb wd green 4tb seagate desktop                                              

Girlfirends: CPU: 8350 Mobo 990fxa-ud3 Ram 8gb kingson ddr3 1600 gpu: his 7850 case: inwin dragon rider SSD: nutron 120gb HDD: 2tb seagate                                                                                                                                         

                                                                                                                                                                                                                                                                                                                                                                                                                  

Link to comment
Share on other sites

Link to post
Share on other sites

2600k sorry

Main Rig: CPU: 3570k Mobo: ga-z77x-ud5h-wb :RAM: 8gb kingson ddr3 1600 :gpu crossfire amd 290's Case: zalman z9 plus Cooler: h80i p/p SSD: nutron 120gb HDD: 2tb wd green 4tb seagate desktop                                              

Girlfirends: CPU: 8350 Mobo 990fxa-ud3 Ram 8gb kingson ddr3 1600 gpu: his 7850 case: inwin dragon rider SSD: nutron 120gb HDD: 2tb seagate                                                                                                                                         

                                                                                                                                                                                                                                                                                                                                                                                                                  

Link to comment
Share on other sites

Link to post
Share on other sites

I've posted my build several times but I'm on my phone atm.

Specs: Core I7-2600K @ 4.5GHz @ 1.35V, 4x4GB Corsair Vengeance Black 1600MHz CL9, Cooler Master Evo 212, MSI Z77 Mpower Motherboard, Sapphire Radeon HD 7950 Vapor-X @ 1000/1400, Cooler Master HAF 932 Blue Edition w/ 3 Cougar Hydraulic Bearing 120MM fans (2 up top 1 in the bottom) replaced side panel with a window, and rear fan with a Cougar Hydraulic Bearing 140MM, Cooler Master GX 650 80+ Bronze PSU, Samsung DVD-RW, Samsung 840 Pro 128GB SSD, Seagate 750GB SATA III 7200RPM

 

Link to comment
Share on other sites

Link to post
Share on other sites

Well the issue is my motherboard. And might as well swap out the cpu for 60 bucks for 25% gain. Sandy bridge can't hit 5.0ghz due to voltage restriction. Also sb can't do pci-e 3.0 along with other things.

Specs: Core I7-2600K @ 4.5GHz @ 1.35V, 4x4GB Corsair Vengeance Black 1600MHz CL9, Cooler Master Evo 212, MSI Z77 Mpower Motherboard, Sapphire Radeon HD 7950 Vapor-X @ 1000/1400, Cooler Master HAF 932 Blue Edition w/ 3 Cougar Hydraulic Bearing 120MM fans (2 up top 1 in the bottom) replaced side panel with a window, and rear fan with a Cougar Hydraulic Bearing 140MM, Cooler Master GX 650 80+ Bronze PSU, Samsung DVD-RW, Samsung 840 Pro 128GB SSD, Seagate 750GB SATA III 7200RPM

 

Link to comment
Share on other sites

Link to post
Share on other sites

if just gaming i would just upgrade the 7950

Main Rig: CPU: 3570k Mobo: ga-z77x-ud5h-wb :RAM: 8gb kingson ddr3 1600 :gpu crossfire amd 290's Case: zalman z9 plus Cooler: h80i p/p SSD: nutron 120gb HDD: 2tb wd green 4tb seagate desktop                                              

Girlfirends: CPU: 8350 Mobo 990fxa-ud3 Ram 8gb kingson ddr3 1600 gpu: his 7850 case: inwin dragon rider SSD: nutron 120gb HDD: 2tb seagate                                                                                                                                         

                                                                                                                                                                                                                                                                                                                                                                                                                  

Link to comment
Share on other sites

Link to post
Share on other sites

pci-e 3.0 right now is gimicky and sandy brige oc better then ivy most people are saying although ur mobo i dont think is going to alow a oc to well being a lower end chip set

Main Rig: CPU: 3570k Mobo: ga-z77x-ud5h-wb :RAM: 8gb kingson ddr3 1600 :gpu crossfire amd 290's Case: zalman z9 plus Cooler: h80i p/p SSD: nutron 120gb HDD: 2tb wd green 4tb seagate desktop                                              

Girlfirends: CPU: 8350 Mobo 990fxa-ud3 Ram 8gb kingson ddr3 1600 gpu: his 7850 case: inwin dragon rider SSD: nutron 120gb HDD: 2tb seagate                                                                                                                                         

                                                                                                                                                                                                                                                                                                                                                                                                                  

Link to comment
Share on other sites

Link to post
Share on other sites

Video editing, rendering, streaming, heavy multitasking. Problem is sb cannot utilize all the features I need. it also cannot oc high enough due to limited over volting.

Specs: Core I7-2600K @ 4.5GHz @ 1.35V, 4x4GB Corsair Vengeance Black 1600MHz CL9, Cooler Master Evo 212, MSI Z77 Mpower Motherboard, Sapphire Radeon HD 7950 Vapor-X @ 1000/1400, Cooler Master HAF 932 Blue Edition w/ 3 Cougar Hydraulic Bearing 120MM fans (2 up top 1 in the bottom) replaced side panel with a window, and rear fan with a Cougar Hydraulic Bearing 140MM, Cooler Master GX 650 80+ Bronze PSU, Samsung DVD-RW, Samsung 840 Pro 128GB SSD, Seagate 750GB SATA III 7200RPM

 

Link to comment
Share on other sites

Link to post
Share on other sites

Need the money to fund next build.

Finalize all the parts you need for your build and make 100% sure you can buy them on a moments notice, then off your entire rig on ebay for 1k, wait for somebody to buy it. When it sells and they've payed the money do a full format of the drives and send it to them.

Then feel free to buy all the parts for your new rig ;) you may have to go a few days without a rig but that will minimize downtime compared to switching out components and selling 1 by one.

export PS1='\[\033[1;30m\]┌╼ \[\033[1;32m\]\u@\h\[\033[1;30m\] ╾╼ \[\033[0;34m\]\w\[\033[0;36m\]\n\[\033[1;30m\]└╼ \[\033[1;37m\]'


"All your threads are belong to /dev/null"


| 80's Terminal Keyboard Conversion | $5 Graphics Card Silence Mod Tutorial | 485KH/s R9 270X | The Smallest Ethernet Cable | Ass Pennies | My Screenfetch |

Link to comment
Share on other sites

Link to post
Share on other sites

Finalize all the parts you need for your build and make 100% sure you can buy them on a moments notice, then off your entire rig on ebay for 1k, wait for somebody to buy it. When it sells and they've payed the money do a full format of the drives and send it to them.

Then feel free to buy all the parts for your new rig ;) you may have to go a few days without a rig but that will minimize downtime compared to switching out components and selling 1 by one.

I have a backup laptop, so I am debating this. But I'm not entirely sure if I can get 1k.

Specs: Core I7-2600K @ 4.5GHz @ 1.35V, 4x4GB Corsair Vengeance Black 1600MHz CL9, Cooler Master Evo 212, MSI Z77 Mpower Motherboard, Sapphire Radeon HD 7950 Vapor-X @ 1000/1400, Cooler Master HAF 932 Blue Edition w/ 3 Cougar Hydraulic Bearing 120MM fans (2 up top 1 in the bottom) replaced side panel with a window, and rear fan with a Cougar Hydraulic Bearing 140MM, Cooler Master GX 650 80+ Bronze PSU, Samsung DVD-RW, Samsung 840 Pro 128GB SSD, Seagate 750GB SATA III 7200RPM

 

Link to comment
Share on other sites

Link to post
Share on other sites

I have a backup laptop, so I am debating this. But I'm not entirely sure if I can get 1k.

 

Oh yes you can! 2 ssd's, an i7, and a 7950! 1k if not more. You could go to town with marketing jargon ;)

export PS1='\[\033[1;30m\]┌╼ \[\033[1;32m\]\u@\h\[\033[1;30m\] ╾╼ \[\033[0;34m\]\w\[\033[0;36m\]\n\[\033[1;30m\]└╼ \[\033[1;37m\]'


"All your threads are belong to /dev/null"


| 80's Terminal Keyboard Conversion | $5 Graphics Card Silence Mod Tutorial | 485KH/s R9 270X | The Smallest Ethernet Cable | Ass Pennies | My Screenfetch |

Link to comment
Share on other sites

Link to post
Share on other sites

Aesthetics, and power. Hd 7950 oc'ed isn't enough, system is too loud, and not powerful enough for what I need.

How on earth is a 7950 not enough?
Link to comment
Share on other sites

Link to post
Share on other sites

How on earth is a 7950 not enough?

It's loud and bogs in crysis 3 and metro last light, plus I am considering a 1440P monitor or 3x1080 monitors soon.

Specs: Core I7-2600K @ 4.5GHz @ 1.35V, 4x4GB Corsair Vengeance Black 1600MHz CL9, Cooler Master Evo 212, MSI Z77 Mpower Motherboard, Sapphire Radeon HD 7950 Vapor-X @ 1000/1400, Cooler Master HAF 932 Blue Edition w/ 3 Cougar Hydraulic Bearing 120MM fans (2 up top 1 in the bottom) replaced side panel with a window, and rear fan with a Cougar Hydraulic Bearing 140MM, Cooler Master GX 650 80+ Bronze PSU, Samsung DVD-RW, Samsung 840 Pro 128GB SSD, Seagate 750GB SATA III 7200RPM

 

Link to comment
Share on other sites

Link to post
Share on other sites

Oh yes you can! 2 ssd's, an i7, and a 7950! 1k if not more. You could go to town with marketing jargon ;)

Here's the issue now that I am on a desktop.

 

I can get 700-800 piecing out the parts I don't need.  To sell my PC, I'll need to buy a new SSD 100-120, shipping will cost 100+, and the case replacement will also cost 100.  So will I get more than 1050?  If so it MIGHT be worth it.  But then I run into the fact that the Corsair 350D is a smaller case, it will not have room for a mechanical drive if I remove the front drives for a thick 60MM radiator.

Specs: Core I7-2600K @ 4.5GHz @ 1.35V, 4x4GB Corsair Vengeance Black 1600MHz CL9, Cooler Master Evo 212, MSI Z77 Mpower Motherboard, Sapphire Radeon HD 7950 Vapor-X @ 1000/1400, Cooler Master HAF 932 Blue Edition w/ 3 Cougar Hydraulic Bearing 120MM fans (2 up top 1 in the bottom) replaced side panel with a window, and rear fan with a Cougar Hydraulic Bearing 140MM, Cooler Master GX 650 80+ Bronze PSU, Samsung DVD-RW, Samsung 840 Pro 128GB SSD, Seagate 750GB SATA III 7200RPM

 

Link to comment
Share on other sites

Link to post
Share on other sites

Here's the issue now that I am on a desktop.

 

I can get 700-800 piecing out the parts I don't need.  To sell my PC, I'll need to buy a new SSD 100-120, shipping will cost 100+, and the case replacement will also cost 100.  So will I get more than 1050?  If so it MIGHT be worth it.  But then I run into the fact that the Corsair 350D is a smaller case, it will not have room for a mechanical drive if I remove the front drives for a thick 60MM radiator.

And why are you paying for the shipping...?

My Best 2013 Bitfenix Prodigy Build  Case: Bitfenix Prodigy White | Motherboard: ASRock Z77E-ITX | CPU: Intel i7 3770k | CPU Cooler: H100i | GPU: GTX 690

Fan Controller: Bitfenix Recon | Ram: Patriot IEM 16GB @ 1600mhz | Primary Storage: 2 x Samsung 840 Pro 256GB | Backup Drives: 2 x Seagate Barracuda 2TB | PSU: Seasonic X850

  

Link to comment
Share on other sites

Link to post
Share on other sites

It's loud and bogs in crysis 3 and metro last light, plus I am considering a 1440P monitor or 3x1080 monitors soon.

You should feel lucky, I'd love to have a 7950. ;)

Link to comment
Share on other sites

Link to post
Share on other sites

Expensive shipping is the leading cause of pc's underselling. It if I charge 50 and I ship it from pa to ca it will cost 150-200. So I can't charge that much.

Specs: Core I7-2600K @ 4.5GHz @ 1.35V, 4x4GB Corsair Vengeance Black 1600MHz CL9, Cooler Master Evo 212, MSI Z77 Mpower Motherboard, Sapphire Radeon HD 7950 Vapor-X @ 1000/1400, Cooler Master HAF 932 Blue Edition w/ 3 Cougar Hydraulic Bearing 120MM fans (2 up top 1 in the bottom) replaced side panel with a window, and rear fan with a Cougar Hydraulic Bearing 140MM, Cooler Master GX 650 80+ Bronze PSU, Samsung DVD-RW, Samsung 840 Pro 128GB SSD, Seagate 750GB SATA III 7200RPM

 

Link to comment
Share on other sites

Link to post
Share on other sites

Since when was a 2600k not good enough any more?

Area 51 2014. Intel 5820k@ 4.4ghz. MSI X99.16gb Quad channel ram. AMD Fury X.Asus RAIDR.OCZ ARC 480gb SSD. Velociraptor 600gb. 2tb WD.

Link to comment
Share on other sites

Link to post
Share on other sites

Since when was a 2600k not good enough any more?

Problem is I need to replace my mobo as the sata controller is failing.  Also sandy bridge can only OC so far due to voltage, is not compatible with PCI-E, so I lose bandwidth with SLI/Xfire, also LGA1155 only usually has 2 SATA 3 ports on mid range boards, and SB doesn't benefit from ram much past 1600MHz even in areas like video rendering.

Specs: Core I7-2600K @ 4.5GHz @ 1.35V, 4x4GB Corsair Vengeance Black 1600MHz CL9, Cooler Master Evo 212, MSI Z77 Mpower Motherboard, Sapphire Radeon HD 7950 Vapor-X @ 1000/1400, Cooler Master HAF 932 Blue Edition w/ 3 Cougar Hydraulic Bearing 120MM fans (2 up top 1 in the bottom) replaced side panel with a window, and rear fan with a Cougar Hydraulic Bearing 140MM, Cooler Master GX 650 80+ Bronze PSU, Samsung DVD-RW, Samsung 840 Pro 128GB SSD, Seagate 750GB SATA III 7200RPM

 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×