Z490I AORUS ULTRA Help

[QuinnKC]

Issue :  Not posting and can't tell if this motherboard has any way to tell me where its at in boot up. 

Fans are spinning, GPU has power, BIOS Q-Flashed to F23. I'm kind of at a loss so any help would be appreciated.

 

Motherboard: Z490I AORUS ULTRA

CPU: i5-10400

Ram: 64gb Crucial DDR4 Pro

GPU: Arc B580

 

 

[-rascal-]

7 hours ago, QuinnKC said:

Issue :  Not posting and can't tell if this motherboard has any way to tell me where its at in boot up. 

Fans are spinning, GPU has power, BIOS Q-Flashed to F23. I'm kind of at a loss so any help would be appreciated.

 

Motherboard: Z490I AORUS ULTRA

CPU: i5-10400

Ram: 64gb Crucial DDR4 Pro

GPU: Arc B580

 

 

What is the exact memory kit that you have?

What SSD / HDD are you using?

 

Since the motherboard has no Debug LEDs, you'll need to purchase a motherboard speaker, plug it into the header, and listen to the BIOS beep codes.

[QuinnKC]

I have Crucial DDR4 Pro 64gb 3200 and Sabrent Rocket Q 1tb

 

I think I have a motherboard speaker somewhere I’ll check that out. 

[QuinnKC]

11 hours ago, -rascal- said:

 

What is the exact memory kit that you have?

What SSD / HDD are you using?

 

Since the motherboard has no Debug LEDs, you'll need to purchase a motherboard speaker, plug it into the header, and listen to the BIOS beep codes.

Put the speaker on it just keeps doing long beeps without any significant pauses

[-rascal-]

18 hours ago, QuinnKC said:

Put the speaker on it just keeps doing long beeps without any significant pauses

 

How many long beeps? How long are the pauses in between the beeps?

There are beep codes...like morse code. 

 

https://www.computerhope.com/beep.htm#ami

https://blog.theretroweb.com/2024/01/20/amibios-beep-and-post-codes-list/

[QuinnKC]

5 hours ago, -rascal- said:

 

How many long beeps? How long are the pauses in between the beeps?

There are beep codes...like morse code. 

 

https://www.computerhope.com/beep.htm#ami

https://blog.theretroweb.com/2024/01/20/amibios-beep-and-post-codes-list/

I figured it out. It was some weird interaction with clearing CMOS and the SDD i had in. For some reason after I took the drive out it booted to a screen saying like BIOS setting have changed would you like to load defaults". After that it started booting into BIOS without a problem.