Just built my first computer, it took me to the fTPM screen and now sits is a black display.

[Intothekey]

system info

AMD Ryzen 57700x3d

ddr4 ram (two sticks)

650watt psu

Gigabytpe B55M DS3H AC Mobo

9060 xt (16gb)

 

So I hooked everything up and turned it on, and I got the fTPM screen, it asked me to press Y so I did. After that I get a black screen (I have display just nothing on it) I've tried everything listed on the try this first before making a post. reset the battery, switched from a DP cable to a HDMI. Whatever I do the bios will not appear

[PDifolco]

Reset CMOS (remove for 1 minute and replug the small button battery on the board)

[Intothekey]

2 minutes ago, PDifolco said:

Reset CMOS (remove for 1 minute and replug the small button battery on the board)

I've already reset CMOS for 10 minutes and even did a power drain.

[PDifolco]

2 minutes ago, Intothekey said:

I've already reset CMOS for 10 minutes and even did a power drain.

Ok

Try booting with only 1 RAM Stick if not already done

Don't think your mobo has debug LEDs ?

Do you know the BIOS revision you have ? You may need to update BIOS to support a late x3D CPU, use the QFlash USB port with an USB stick

[Intothekey]

2 minutes ago, PDifolco said:

Ok

Try booting with only 1 RAM Stick if not already done

Don't think your mobo has debug LEDs ?

Do you know the BIOS revision you have ? You may need to update BIOS to support a late x3D CPU, use the QFlash USB port with an USB stick

 

Tried booting without a ram stick and still nothing.
I don't have the RGB plugs in so I'm not sure.

Sadly no just got the Gigabyte b550M DS3H AC fresh off of amazon. I did notice it might need a bios update to support the 5800x3d but I have a 5700x3d and considering my bios isn't working I don't even know how I'd go about updating it

[Intothekey]

29 minutes ago, PDifolco said:

Ok

Try booting with only 1 RAM Stick if not already done

Don't think your mobo has debug LEDs ?

Do you know the BIOS revision you have ? You may need to update BIOS to support a late x3D CPU, use the QFlash USB port with an USB stick

Actually considering the 5800x3d came out before the 5700x3d, your probably right about it needing an update

[PDifolco]

1 hour ago, Intothekey said:

 

Tried booting without a ram stick and still nothing.
I don't have the RGB plugs in so I'm not sure.

Sadly no just got the Gigabyte b550M DS3H AC fresh off of amazon. I did notice it might need a bios update to support the 5800x3d but I have a 5700x3d and considering my bios isn't working I don't even know how I'd go about updating it

Your board has QFlash, it means that you can copy the updated BIOS to an USB stick, stick it in the QFlash labelled board USB port, press a button, and let it do the update without booting