help New PC build won't work (MSI MEG X870E GODLIKE with AMD Ryzen 9 9950X3D

[Emperor Storky]

Hi all,

 

I finished building and when I boot my PC it won't work see video.

Video from booting the PC

 

I changed from the original parts the ram to a kit that is on the site of MSI.
Before booting I pressed for like 10 seconds the Clear CMOS button on the back.

 

Specs:

MB: MSIM MEG X870E GODLIKE

CPU: AMD Ryzen 9 9940X3D

RAM: F5-6000J3040G32GX2-FX5

PSU: Corsair: HX1500i 2025 version
CASE: Cooler Master HAF 700 EVO

The problem is that I have no spare CPU for example to rule the CPU out.

What could it be based on the codes? 

[The K-Man89]

46 minutes ago, Emperor Storky said:

Hi all,

 

I finished building and when I boot my PC it won't work see video.

Video from booting the PC

 

I changed from the original parts the ram to a kit that is on the site of MSI.
Before booting I pressed for like 10 seconds the Clear CMOS button on the back.

 

Specs:

MB: MSIM MEG X870E GODLIKE

CPU: AMD Ryzen 9 9940X3D

RAM: F5-6000J3040G32GX2-FX5

PSU: Corsair: HX1500i 2025 version
CASE: Cooler Master HAF 700 EVO

The problem is that I have no spare CPU for example to rule the CPU out.

What could it be based on the codes? 

A few of those codes are for bad drivers, devices disabled, can't initialize device ect. They are likely all being tripped by a potential bad bios. Try flashing the most recent version of the bios from usb, re seat all the components and try booting 

[Blai5e]

@Emperor Storky What BIOS are you on? You need to use version 7E48v1A27 (released 25 March 2025) at a minimum to support the 9950X3D CPU. This can be done using the "BIOS flashback" button on the rear I/O panel with the BIOS on a USB stick. See page 89 of your manual for exact instructions.

[strange13930]

1 hour ago, Emperor Storky said:

Hi all,

 

I finished building and when I boot my PC it won't work see video.

Video from booting the PC

 

I changed from the original parts the ram to a kit that is on the site of MSI.
Before booting I pressed for like 10 seconds the Clear CMOS button on the back.

 

Specs:

MB: MSIM MEG X870E GODLIKE

CPU: AMD Ryzen 9 9940X3D

RAM: F5-6000J3040G32GX2-FX5

PSU: Corsair: HX1500i 2025 version
CASE: Cooler Master HAF 700 EVO

The problem is that I have no spare CPU for example to rule the CPU out.

What could it be based on the codes? 

how long are you giving it for memory training? did you try updating the bios?

[Emperor Storky]

7 hours ago, Blai5e said:

@Emperor Storky What BIOS are you on? You need to use version 7E48v1A27 (released 25 March 2025) at a minimum to support the 9950X3D CPU. This can be done using the "BIOS flashback" button on the rear I/O panel with the BIOS on a USB stick. See page 89 of your manual for exact instructions.

I have the latest version from April, I can redownload it and try again to update. 
 

As I had no usb stick I did use a microSD card in a reader to update, could that cause issues? I saw that it was updating and rebooting after the update. 

 

And before I updated anything I saw the message no CPU/Ram to see if it was perhaps already having the right BIOS. 

[Emperor Storky]

7 hours ago, strange13930 said:

how long are you giving it for memory training? did you try updating the bios?

Until i saw the Boot Error. 

[Emperor Storky]

22 hours ago, The K-Man89 said:

A few of those codes are for bad drivers, devices disabled, can't initialize device ect. They are likely all being tripped by a potential bad bios. Try flashing the most recent version of the bios from usb, re seat all the components and try booting 

I guess it works now. Have to put in my 2080 Ti (as I'm now a poor guy lol) to see if it sends video signal so I see it actually works.
But I guess the video looks promesing: 

 

[The K-Man89]

1 hour ago, Emperor Storky said:

I guess it works now. Have to put in my 2080 Ti (as I'm now a poor guy lol) to see if it sends video signal so I see it actually works.
But I guess the video looks promesing: 

 

Glad it works let me know if you get everything up and running great or run into any more problems!

[Emperor Storky]

5 hours ago, The K-Man89 said:

Glad it works let me know if you get everything up and running great or run into any more problems!

Well this weekend I will take out the GPU of my old PC and put it into this one and hopefully no other issues. 

[The K-Man89]

1 minute ago, Emperor Storky said:

Well this weekend I will take out the GPU of my old PC and put it into this one and hopefully no other issues. 

Sounds great hope it all runs smoothly for you!!