Just moved and all 3 PC’s now won’t post

HypeMunk3y · March 20

Over the weekend my wife and I moved about 10 minutes away and as we were setting up I tired to get the pc’s back up but was getting a VGA light. Left it to the next day. This morning I tried to (list is for all 3 computers) reseed the GPU didn’t work. Removed and used one know good stick of ram. Tho one did post once and then I unplugged it to move it over to the desk and and wasn’t post again now. And have cleared all CMOS. In my personal rig I have tried a mobo swap and that still did nothing. Any help would be appreciated! Thx for reading

Somerandomtechyboi · March 20

take the parts outside their cases and see if that helps, otherwise id just rma all three of the boards if possible just to save the hassle of troubleshooting

MrSimplicity · March 20

Have you tried booting with onboard graphics? Just remove the GPU and see. I've had PCs boot into windows even with dead GPUs but if you're getting a VGA light then it's obviously getting hung up there. Also, not saying you didn't, but when moving computers around always flip the power switch on the PSU before unplugging. If it did post in one spot, try there again or on a different circuit in the home. Could potentially be dirty power. For now I would just try without the GPU installed, if you're running with a CPU with integrated graphics that is. Also go through and just make sure ALL of your cables are seated properly. Sata, PCI, etc. Best to just unplug and plug everything back in.