Troubleshooting potential DDR5 issue on AM5 platform-

[Kanna]

Hey, I have a system that is running Windows server 2022 it's equipped with a Ryzen 7 7700 on a ASUS TUF b650 plus board, and 2x16GB corsair 6000MHz, it's kinda vital that it works, but suddenly it started getting blue screens for things like IRQL_NOT_LESS_OR_EQUAL ntoskrnl.exe and MEMORY_MANAGEMENT ntoskrnl.exe.  First I tried reinstalling my GPU drivers and also doing a chkdsk, which repaired errors, but they weren't back when I ran another one. Ended up running a MemTest86 which did give me like 150 errors, didn't do the full 4 passes as well already one error is enough tbh. So I did some scans and tests, swapping round the ram, noted I only tried the 2 and 4 slots on my board since that's what is recommended for dual-channel, I countered the very weird issue of the RAM being fine when in one of the slots, and combined, but not the other slot and combined, all worked separately. 

 

Dual-channel, error.
Ram slot 2 - Stick 2

Ram slot 4 - Stick 1

 

Single, Pass

Ram slot 2 - Stick 2

 

Single, Pass

Ram slot 4 - Stick 2

 

Single, Pass

Ram slot 4 - Stick 1

 

Single, Pass

Ram slot 2 - Stick 1

 

Dual-channel, Pass
Ram slot 2 - Stick 1
Ram slot 4 - Stick 2

 

Dual-channel, pass (one pass)
Ram slot 2 - Stick 2
Ram slot 4 - Stick 1

 

The sticks are identified as 1 and 2 using the serial numbers. It's also worth nothing that on the last one where it was the supposed error config, it didn't error out after one pass and I cancelled, because the other 2 times I tried it (only one documented her on top) had errored out early in pass 1. I have not tried much more troubleshooting than this mentioned, also the obvious like restarting the computer ofc has been done since I've swapped RAM lol.