5700 x3d upgrade not posting.

Orbwair · February 18

PC turns on, no output on monitors, nothing happens. wont post.
I pop my old cpu back in everything works just fine.

Troubleshooting steps ive tried:
clearing the CMOS (though i probably didnt do it right)
Reseeding the CPU

and thats kinda it didnt know what else to do.

Any advice is appreciated.

Specs:
CPU: Ryzen 5 2600 (attempting upgrade to 5700x3d
MOBO: Gigabyte Tech B450M DS3h V2 (AM4) BIOS Version: 67b
32GB Ram
Windows 11

Supersonicwolfe · February 18

1 hour ago, Orbwair said:

PC turns on, no output on monitors, nothing happens. wont post.
I pop my old cpu back in everything works just fine.

Troubleshooting steps ive tried:
clearing the CMOS (though i probably didnt do it right)
Reseeding the CPU

and thats kinda it didnt know what else to do.

Any advice is appreciated.

Specs:
CPU: Ryzen 5 2600 (attempting upgrade to 5700x3d
MOBO: Gigabyte Tech B450M DS3h V2 (AM4) BIOS Version: 67b
32GB Ram
Windows 11

BIOS should be fine as the board should support the CPU since F60. There is a new BIOS F64d available so try update to that.

(Gigabyte also resets CMOS SETTINGS when you flash the BIOS)

I woould suggest use minimum system setup (GPU since 5700X3D have no integrated, ONE RamStick, no storage) then try clear CMOS again.

(Follow the motherboard manual, or use generic method: disconnect power-> press power button for a few times->take out the CR2032 BATTERY-> Use something like a paperclip or large screwdriver to connect the two Battery terminals)

**If your motherboard uses a jumper to clear CMOS, make sure the jumper returned to normal position. In many motherboards it's usually a open jumper.

Also, did you get fan spin?