Jump to content

good afternoon, I need your help, in general, the situation is as follows -there is an aio -rog ryujin II, but there is no fan hub (controller), which is included... In this case, 2 wires come out of the cover with the screen - 1 usb 9pin to the motherboard , which is responsible for the screen and controls , and the second is a power cable, at its end is a micro usb plug , which must be connected to the same hub (controller) which doesn 't exist .. so the question is, if you connect this micro usb wire through a 4pin adapter to the CPU fan on the motherboard, will it work)?_20250118_110611.png.e97269b7bc82e2691cae7e3e2538759e.png_20250116_205820.png.efcb0a38aa855bbadf25d6cbcfbccbd8.png_20250116_205044.png.287f49ca9e97a90e71b0a9bf1fa9c859.png_20250116_204432.png.c7dd2a39d66ed24e0eeee41cbabb4de9.png

_20250116_204658.png

Link to comment
https://linustechtips.com/topic/1597165-need-help-with-asus-rog-ryujin-ii/
Share on other sites

Link to post
Share on other sites

so the controller exists, but you dont have it right?

you can try connecting it, but you run the risk of the connector being wired in a proprietary way, meaning something will be fried in the process

theres no easy way of figuring this out other than looking at the wiring diagrams , which i doubt you'll find

gaming system: Intel core I9 12900ks / biostar Z690A valkyrie / 4x8gb corsair Vengeance @3333Mhz ram / RX 7900XTX pulse gpu / Thermalright peerless assassin 140 /Coolermaster Qube 500 case / Be Quiet Dark Power Pro 12 1500w power supply

 

laptop: Dell xps 9510, 3.5k OLED, i7 11800h, rtx 3050 ti, 2x16gb DDR4 @ 3200Mhz, 1TB main drive, 2TB add in ssd

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×