Jump to content

WiFi lag spikes

Hello!

Unfortunately when playing games, I have had incredibly high ping. Now these are lag spikes but they jump from something like 19ms to 500ms and back to 19ms and it's incredibly annoying. Now I used cmd to ping Google.com and see if I could find anything in there and yet I did. Very strange and don't know where to go now. 

I've tried:

  • Updating drivers
  • ipconfig /flushdns 
  • netsh winsock reset

But what do I do! I tried ipconfig /renew or release but I don't understand why that isn't working. Any help?

Screenshot 2024-09-16 223547.png

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, FireLegend said:

But what do I do!

Use wired Ethernet.

F@H
Desktop: i9-13900K, ASUS Z790-E, 64GB DDR5-6000 CL36, RTX3080, 2TB MP600 Pro XT, 2TB SX8200Pro, 2x16TB Ironwolf RAID0, Corsair HX1200, Antec Vortex 360 AIO, Thermaltake Versa H25 TG, Samsung 4K curved 49" TV, 23" secondary, Mountain Everest Max

Mobile SFF rig: i9-9900K, Noctua NH-L9i, Asrock Z390 Phantom ITX-AC, 32GB, GTX1070, 2x1TB SX8200Pro RAID0, 2x5TB 2.5" HDD RAID0, Athena 500W Flex (Noctua fan), Custom 4.7l 3D printed case

 

Asus Zenbook UM325UA, Ryzen 7 5700u, 16GB, 1TB, OLED

 

GPD Win 2

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, Kilrah said:

Use wired Ethernet.

I can't run that through my house

Link to comment
Share on other sites

Link to post
Share on other sites

53 minutes ago, FireLegend said:

I can't run that through my house

That may be but WiFi is susceptible to interference. 

 

It could be other WiFi networks around you causing issues. Other devices that use the same spectrum WiFi does (bluetooth, cordless phones, etc). The building materials of your home. Any other number of things. 

 

The only thing you can do is test between all the bands. Generally 2.4 Ghz is going to have a lot of traffic on it so 5 Ghz might do better. Now 6 Ghz has been added to the mix with WiFi 6E and above (but not all routers support it. Changing the channels that your radios transmit on. With 2.4 Ghz for example there are 11 WiFi channels if you are in the US anyway. Channels 1, 6, and 11 do not over lap. Where as the other WIFi channels other lap with adjacent channels. 

 

The other thing to consider. The lower the frequency the lower the speed but the longer the range and penetration power. The higher the frequency the lower the range and penetration power but the higher the speed. WiFi also hate dense materials, so concrete and brick can play havoc with WIFi signals. 

 

I just want to sit back and watch the world burn. 

Link to comment
Share on other sites

Link to post
Share on other sites

49 minutes ago, FireLegend said:

Hello!

Unfortunately when playing games, I have had incredibly high ping. Now these are lag spikes but they jump from something like 19ms to 500ms and back to 19ms and it's incredibly annoying. Now I used cmd to ping Google.com and see if I could find anything in there and yet I did. Very strange and don't know where to go now. 

I've tried:

  • Updating drivers
  • ipconfig /flushdns 
  • netsh winsock reset

But what do I do! I tried ipconfig /renew or release but I don't understand why that isn't working. Any help?

Screenshot 2024-09-16 223547.png

In my own experience I have dealt with lag and determined it was the game and not my internet connection. Not saying that is your issue. I would suggest you download a manual on your wireless gateway. Look and see if it has a list of acceptable signal levels within the manual. Go to the wireless gateways configuring page. You can look that up by your ISP's website. You can also look up error logs within the wireless gateway. That will help to find out if their is a signal issue with the wireless gateway or a signal issue with the coax cable. If you are running on cable internet and using a splitter. A bad splitter can cause signal issues. They don't cost much. There are ones that use coaxial copper and then the others use a hybrid coaxial fiber. There should be a sticker on the splitter. That will let you know which type you may need. If you haven't made any changes that's not a bad place to look. You'll need to check Device Manager within Windows. Look for any yellow flag icons or exclamation points. They will show something isn't right with the hardware. A wireless gateway by default will use non-blending channels for Wi-Fi unless you have made any changes to the wireless gateway. If all else fails. Contact your ISP and get connected to their tech support. Be patient while being on the line with tech support. Sometimes it takes awhile to get to the right person. 

Link to comment
Share on other sites

Link to post
Share on other sites

4 hours ago, FireLegend said:

I can't run that through my house

what's preventing it? 

The direction tells you... the direction

-Scott Manley, 2021

 

Softwares used:

Corsair Link (Anime Edition) 

MSI Afterburner 

OpenRGB

Lively Wallpaper 

OBS Studio

Shutter Encoder

Avidemux

FSResizer

Audacity 

VLC

WMP

GIMP

HWiNFO64

Paint

3D Paint

GitHub Desktop 

Superposition 

Prime95

Aida64

GPUZ

CPUZ

Generic Logviewer

 

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×