Pc won’t boot after new cpu

[lSykol]

Hey guys I have a Aorus Gaming 5 WiFi that had a Ryzen 5 2600. I upgraded to a Ryzen 7 5700X3D. I have updated the bios to a new version beforehand. When I plug in the psu the lights on the motherboard turn on but the indicator lights don’t. When I hit the power button and or short the pins for power the pc does not turn on. This is both with the new and old cpu. 
 

when I was upgrading the cpu some thermal paste got in the socket but I used isopropyl alcohol to remove it and I let it dry, no pins are bent on the cpu. 
 

the power supply is good enough, 750 watt, but I am at a loss on what to do next. if y’all had any suggestions I would be a greatly appreciative person. Thank you so much

[DoctorNick]

10 minutes ago, lSykol said:

Hey guys I have a Aorus Gaming 5 WiFi that had a Ryzen 5 2600. I upgraded to a Ryzen 7 5700X3D. I have updated the bios to a new version beforehand. When I plug in the psu the lights on the motherboard turn on but the indicator lights don’t. When I hit the power button and or short the pins for power the pc does not turn on. This is both with the new and old cpu. 
 

when I was upgrading the cpu some thermal paste got in the socket but I used isopropyl alcohol to remove it and I let it dry, no pins are bent on the cpu. 
 

the power supply is good enough, 750 watt, but I am at a loss on what to do next. if y’all had any suggestions I would be a greatly appreciative person. Thank you so much

So you cant boot with either CPU now? Remove CMOS battery and insert R5 2600. (while psu is OFF).  Insert 1 ram stick in slot A2. Boot and flash BIOS version F60.

[lSykol]

1 minute ago, DoctorNick said:

So you cant boot with either CPU now? Remove CMOS battery and insert R5 2600. (while psu is OFF).  Insert 1 ram stick in slot A2. Boot and flash BIOS version F60.

Okay trying now. Yes both don’t turn on

[lSykol]

Dose not boot when 2600 is in with only one stick of ram. It did however show a cpu indicator light when the 2600 was in but the 8pin connector was not in, I shut it off after the fans started to spin because my cooler wasn’t connected to the cpu so I didn’t want to have it burn up. 

[lSykol]

27 minutes ago, DoctorNick said:

So you cant boot with either CPU now? Remove CMOS battery and insert R5 2600. (while psu is OFF).  Insert 1 ram stick in slot A2. Boot and flash BIOS version F60.

New thing, when the 2600 is in the socket with the power on there is a red cpu indicator light that is on but the fans are going now

[lSykol]

Still no boot tho

[DoctorNick]

1 minute ago, lSykol said:

New thing, when the 2600 is in the socket with the power on there is a red cpu indicator light that is on but the fans are going now

What BIOS version is on the PC now? Also did you remember to plug monitor into GPU?

If you did the above, insert the new CPU and see if its different

[lSykol]

7 minutes ago, DoctorNick said:

What BIOS version is on the PC now? Also did you remember to plug monitor into GPU?

If you did the above, insert the new CPU and see if its different

Got into bios and it’s f62, switching to 5700 now to see if it boots

[DoctorNick]

2 minutes ago, lSykol said:

Got into bios and it’s f62, switching to 5700 now to see if it boots

woo!

[lSykol]

4 minutes ago, DoctorNick said:

woo!

Yahhhhh!!!!!! Got to Home Screen with the 5700 but now gonna try with all ram seated. 

[lSykol]

6 minutes ago, DoctorNick said:

woo!

Nooooo it doesn’t like all sticks of ram in

[lSykol]

1 minute ago, lSykol said:

Nooooo it doesn’t like all sticks of ram in

One red cpu indicator is on

[DoctorNick]

Just now, lSykol said:

Nooooo it doesn’t like all sticks of ram in

Okm with one stick in A2, boot and download F64 and F65b. https://www.gigabyte.com/Motherboard/X470-AORUS-GAMING-5-WIFI-rev-10/support#support-dl-bios

Flash F64 first, then F65b. Then try with two sticks A2 B2. (if you got two different kits og 2 sticks, remember to pair them, so kit 1 is in A2 B2, kit 2 is in A1 B1

[lSykol]

9 minutes ago, DoctorNick said:

Okm with one stick in A2, boot and download F64 and F65b. https://www.gigabyte.com/Motherboard/X470-AORUS-GAMING-5-WIFI-rev-10/support#support-dl-bios

Flash F64 first, then F65b. Then try with two sticks A2 B2. (if you got two different kits og 2 sticks, remember to pair them, so kit 1 is in A2 B2, kit 2 is in A1 B1

Yah it didn’t like the second set of sticks but am downloading f64 now will update if I need further assistance but thank you so much man it means a lot

[lSykol]

43 minutes ago, DoctorNick said:

Okm with one stick in A2, boot and download F64 and F65b. https://www.gigabyte.com/Motherboard/X470-AORUS-GAMING-5-WIFI-rev-10/support#support-dl-bios

Flash F64 first, then F65b. Then try with two sticks A2 B2. (if you got two different kits og 2 sticks, remember to pair them, so kit 1 is in A2 B2, kit 2 is in A1 B1

Yep is up and running thank you very much!!!

[DoctorNick]

1 minute ago, lSykol said:

Yep is up and running thank you very much!!!

Did it work with 4 sticks after update?