Jump to content

Hello, 

I just upgraded my pc from a intel to an amd processor and a new motherboard. Ive installed everything necessary and put the mb in the casem, the motherboard is a a520 aorus elite from gigabyte and an 5 5600x CPU. (REVISION 1.2) I have done a bios update to the F19 bios version using a usb with fat32 and followed the tutorial on the site. I did this and the pc turns on whilst doing the bios update ( its still flashing red) and then stops flashing red which indicates its finished. the case fans, and cpu fans work but it wont display anything.

Link to post
Share on other sites

Do you have a GPU installed? The 5600x doesn't have an iGPU so you won't get any display out from the Motherboard. 

Community Standards | Fan Control Software

Please make sure to Quote me or @ me to see your reply!

Just because I am a Moderator does not mean I am always right. Please fact check me and verify my answer. 

 

"Black Out"

Ryzen 9 5900x | Full Custom Water Loop | Asus Crosshair VIII Hero (Wi-Fi) | RTX 3090 Founders | Ballistix 32gb 16-18-18-36 3600mhz 

1tb Samsung 970 Evo NVMe | 4tb WD SN850x NVMe | Fractal Design Meshify S2 | Corsair HX1200 PSU

 

Dedicated Streaming Rig

 Ryzen 7 3700x | Asus B450-F Strix | 32gb Gskill Flare X 3200mhz | Corsair RM550x PSU | MSI Ventus 3060 12gb | 250gb 860 Evo m.2

Phanteks P300A |  Elgato HD60 Pro | Avermedia Live Gamer Duo | Avermedia 4k GC573 Capture Card

 

Link to post
Share on other sites

1 minute ago, Skiiwee29 said:

Do you have a GPU installed? The 5600x doesn't have an iGPU so you won't get any display out from the Motherboard. 

Yes i have the GPU installed and there is a DP cable plugged into it, i am running it of a GTX 1650

Link to post
Share on other sites

8 minutes ago, Skiiwee29 said:

Do you have a GPU installed? The 5600x doesn't have an iGPU so you won't get any display out from the Motherboard. 

Would it be a problem if i have a 350W power supply since this was a prebuilt from Argos with actual parts aka msi motherboard. its a FSP400-A

Link to post
Share on other sites

1 minute ago, T3mpest said:

Would it be a problem if i have a 350W power supply since this was a prebuilt from Argos with actual parts aka msi motherboard. its a FSP400-A

As long as the GPU does not require external power from like a 6 or 8 pin it should be fine. IF it requires an external connector, then the GPU will fail the post process due to lack of power. 

Community Standards | Fan Control Software

Please make sure to Quote me or @ me to see your reply!

Just because I am a Moderator does not mean I am always right. Please fact check me and verify my answer. 

 

"Black Out"

Ryzen 9 5900x | Full Custom Water Loop | Asus Crosshair VIII Hero (Wi-Fi) | RTX 3090 Founders | Ballistix 32gb 16-18-18-36 3600mhz 

1tb Samsung 970 Evo NVMe | 4tb WD SN850x NVMe | Fractal Design Meshify S2 | Corsair HX1200 PSU

 

Dedicated Streaming Rig

 Ryzen 7 3700x | Asus B450-F Strix | 32gb Gskill Flare X 3200mhz | Corsair RM550x PSU | MSI Ventus 3060 12gb | 250gb 860 Evo m.2

Phanteks P300A |  Elgato HD60 Pro | Avermedia Live Gamer Duo | Avermedia 4k GC573 Capture Card

 

Link to post
Share on other sites

2 minutes ago, Skiiwee29 said:

As long as the GPU does not require external power from like a 6 or 8 pin it should be fine. IF it requires an external connector, then the GPU will fail the post process due to lack of power. 

I used this PSU with my old setup and now its with the new one, the old mobo and cpu worked fine with the gpu 

(the fans spin up and everything when powered)

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×