Fire-ey end to a almost brand new desktop i built, and some advice

[Indian pc builder]

ok, so... i may have made a mistake while haphazardly swapping cpu's...

So for context, the computer was not starting up after I had swapped the cpu, Given that the outlet i had plugges it into did seem a bit dodgy, I plugged it into another socket, after which there was smoke and then i immediately unplugged it. Now my dad( who's computer this was) somehow didnt see the plume of white smoke and said that we should try taking it to another room, despite my insistence that its dead. Then, on his stubborn will to make it burn, he made me take it to my room and try it again, luckily I was smart enough to take the drive out, so we haven't lost any data. we plugges it it and tried again, and again there was smoke, as clear as day and in front of my dad's face but he still refused to believe it was dead and wanted to try it again, so this time thinking it would smoke again, and to show him, i decided to make a video. You

can see what happened here, in the attached gof which i have made from that said video(that's him turning it on after i refused to touch it).

after that, i took it apart and found this

dead mobo power deliver part

probably bent pins that caused this

and a tiny bulge on the backside of the cpu resembling those on the backsides of dead am5 cpu's during their recent spree of issues.

 

So currently, I assume the ram works, the cpu is dead and so is the motherboard, 

 

 

I'm going to go out and buy a new mobo for sure, and perhaps a new cpu( probably yes as it looks like the bent pins are what shorted on the cpu, probably rendering it useless)

 

am i good to buy a new mobo and cpu, or should i try using the cpu?

 

any other parts i should be worried about?

[jaslion]

Full specs please.

 

Your cpu is DEAD it has a swollen pcb dont use it.

 

Board same thing.

 

Other parts depends really most should be ok.

 

 

[Indian pc builder]

13 hours ago, jaslion said:

Full specs please.

 

Your cpu is DEAD it has a swollen pcb dont use it.

 

Board same thing.

 

Other parts depends really most should be ok.

 

 

I3-12100, gigabyte h610 ddr4, 2x8gb crucial 2666mhz ram, cheap aliexpress 256gb sata boot ssd

[jaslion]

11 minutes ago, Indian pc builder said:

I3-12100, gigabyte h610 ddr4, 2x8gb crucial 2666mhz ram, cheap aliexpress 256gb sata boot ssd

Budget for replacement parts?

 

Small tip just for upgradabilities sake don't get a dirt cheap board. Get something that can handle more than a 80w cpu before overheating it's vrm.

[Indian pc builder]

59 minutes ago, jaslion said:

Budget for replacement parts?

 

Small tip just for upgradabilities sake don't get a dirt cheap board. Get something that can handle more than a 80w cpu before overheating it's vrm.

I think the issue was caused by the cpu not being seated properly and not the motherboard being bad, it was a gigabyte h610m, so it should have been a problem 

[jaslion]

35 minutes ago, Indian pc builder said:

I think the issue was caused by the cpu not being seated properly and not the motherboard being bad, it was a gigabyte h610m, so it should have been a problem 

Oh yeah totally that way most likely. Just saying for future purchases!