Will this same model of Memory kit work in my system?

[Tech Reprise]

Hello,

I have a kit of 2*8gb TridentZ 3600Mhz CL18 RGB in my system. Since memory prices have plummeted I am getting another kit to make a total of 4*8gb and have found the same model kit on Amazon. 

Will both these kits work in my system at 3600 Mhz?

Model is this:

 

Motherboard: Asrock x570 Phantom Gaming 4

Cpu: Ryzen 3500

 

[mariushm]

Yeah you can mix them. 

You may have to manually configure the timings to the more conservative ones between the two pairs. 

For example, the G-skill  has 18-22-22-42  while the Trident may have 18-20-20-38 or some other better timings ... if that's the case, set the timings manually to 18-22-22-42 at least at the start then if you want to squeeze the most performance, you can manually lower the timings to get closer to the Trident timings and see where you get instability and back down a notch until you're stable again.

[Tech Reprise]

5 hours ago, mariushm said:

Yeah you can mix them. 

You may have to manually configure the timings to the more conservative ones between the two pairs. 

For example, the G-skill  has 18-22-22-42  while the Trident may have 18-20-20-38 or some other better timings ... if that's the case, set the timings manually to 18-22-22-42 at least at the start then if you want to squeeze the most performance, you can manually lower the timings to get closer to the Trident timings and see where you get instability and back down a notch until you're stable again.

Both are exactly same in specifications. Just from a different lot.