Jump to content

Are my AIO tubes too stretched ?

Jabgoanxotbalbx

Hi guys, 

‘When completing my rig I was just wondering if my CLC360 tubes are too stretched ? Because the tubes are being pulled on the side. I still have some slack but I can’t get them to be in a better form that what they are right now.

Thanks ! 

image.jpg

E66EB98C-2BAC-43CD-874C-E528265B2FE6.jpeg

Link to comment
Share on other sites

Link to post
Share on other sites

I am not seeing any sort of stretch. This is fine.

mY sYsTeM iS Not pErfoRmInG aS gOOd As I sAW oN yOuTuBe. WhA t IS a GoOd FaN CuRVe??!!? wHat aRe tEh GoOd OvERclok SeTTinGS FoR My CaRd??  HoW CaN I foRcE my GpU to uSe 1o0%? BuT WiLL i HaVE Bo0tllEnEcKs? RyZEN dOeS NoT peRfORm BetTer wItH HiGhER sPEED RaM!!dId i WiN teH SiLiCON LotTerrYyOu ShoUlD dEsHrOuD uR GPUmy SYstEm iS UNDerPerforMiNg iN WarzONEcan mY Pc Run WiNdOwS 11 ?woUld BaKInG MY GRaPHics card fIX it? MultimETeR TeSTiNG!! aMd'S GpU DrIvErS aRe as goOD aS NviDia's YOU SHoUlD oVERCloCk yOUR ramS To 5000C18

 

Link to comment
Share on other sites

Link to post
Share on other sites

They look fine but if it bugs you can you not flip the radiator round so the hoses are towards the rear of the case?

Link to comment
Share on other sites

Link to post
Share on other sites

7 minutes ago, glenalz81 said:

They look fine but if it bugs you can you not flip the radiator round so the hoses are towards the rear of the case?

They seem strechted in both ways. To the front of the case is in this way and strechted towards the bottom of the case if in the other way.

Link to comment
Share on other sites

Link to post
Share on other sites

11 minutes ago, Levent said:

I am not seeing any sort of stretch. This is fine.

Thanks ! 

Link to comment
Share on other sites

Link to post
Share on other sites

1 hour ago, Jabgoanxotbalbx said:

They seem strechted in both ways. To the front of the case is in this way and strechted towards the bottom of the case if in the other way.

You could try to mount it the other way around and sort of cable manage the tubes a bit using cableties, zipties or even thick string if it bugs you a lot, that's what I did for my tubes when I had to get them out of the way, or it might be possible to rotate the block 90° to possibly give the tube that's closer to the end of the case some more slack.

Trans Rights!
Please tag me or use the "reply" function so I get a notification

I will find your Laptop thread and I will recommend an ITX build instead

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sure would be neat if there was something useful here, eh?

Link to comment
Share on other sites

Link to post
Share on other sites

Looks kink-free from here. & if you can move them slightly further without kinking them, then they should be good.

 

I wonder if EVGA should've flipped their tubes here - had the left tube off the CPU going to the front of the AIO, & the right tube going to the rear of the AIO, to take out the cross-over of tubes. Would've looked better in your kind of setup. Though, that would've made one tube much shorter than the other & probably added problems for alternate mount scenarios.

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×