Cpuz bugging out or my rams actually single channel?

[Somerandomtechyboi]

My bet is cpuz is being retarded and bugging out cause it is straight up impossible to run single channel with 3 sticks unless you have some weird 3dimm per channel board which this p6t deluxe v2 is not and only has 2 dimms per channel

 

 

First stick in the red slot while 2nd and 3rd stick in the black slots seems to provide best ocing ability (tested by running a barely stable oc that gets into windows and seeing if it bsods instantly on diff config) so thats why im running it like this

 

They are diff channels but why is cpuz reporting them running as single channel and not triple channel?

[Kilrah]

This is a triple channel board and you didn't put one stick in each channel so it's not going to be running triple channel. 

[Levent]

Lol. Ram in B0, A1, B2 = single channel.

[Beerzerker]

Yep - Misconfigured RAM will do it everytime.

[demonix00]

It is a triple channel board so you need to move the stick of RAM that is in the orange slot into the vacant black slot and it'll properly show as being in triple channel mode.

[Somerandomtechyboi]

3 hours ago, demonix00 said:

It is a triple channel board so you need to move the stick of RAM that is in the orange slot into the vacant black slot and it'll properly show as being in triple channel mode.

The 1st black slot is effectively a dud cause the board wont boot if you put a stick in it

 

Figured its triple channel either way cause its impossible to run single channel with 3 dimms unless you got a 3 dimm per channel board

 

Btw if anyones wondering they are transcend 1333 ram with psc x series ics, final setting for the oc is 5-10-7-24 82trfc, 1.8v, volt is very low but the sticks dont seem to wanna run higher unless i play around with the other timings, though idk what other timings that scales with volt other than cl (trcd+trp+tras dont scale with volt on this ram)