Jump to content

Skip GRUB on dual boot?

CT854
Go to solution Solved by OhioYJ,
4 minutes ago, CT854 said:

Would changing Windows to the default option skip GRUB outright or would it just select it after the 10 seconds?

Changing Windows to the default option in the Bios, skips Grub. If you modify Grub to use Windows as the default it will just select it after however many seconds you set it, that's why I also suggested you reduce this time, I use a 3 second delay. 3 seconds is enough time to choose something else (the timer does stop if you hit a key) but not enough time to be annoyingly long.

 

Personally if you aren't going to use Linux, you might as well just remove it. Going into the Bios all the time would annoy me more. However to each their own.

So, I got my Framework laptop up and running, and installed Windows setting aside a partition for a Linux install. However, I have a (admittedly very strange) hang-up with using dual-boot -- I don't want to encounter the GRUB screen every time I boot into Windows, since I use it as my daily driver while I want to have a Linux distro installed for occasional use. Is there a way I can just let it boot into Windows by default, and whenever I want to use Linux, let me boot from the BIOS?

It's entirely possible that I misinterpreted/misread your topic and/or question. This happens more often than I care to admit. Apologies in advance.

 

珠江 (Pearl River): CPU: Intel i7-12700K (8p4e/20t); Motherboard: ASUS TUF Gaming Plus Z690 WiFi; RAM: G.Skill TridentZ RGB 32GB (2x16GB) DDR4 @3200MHz CL16; Cooling Solution: NZXT Kraken Z53 240mm AIO, w/ 2x Lian Li ST120 RGB Fans; GPU: EVGA Nvidia GeForce RTX 3080 10GB FTW3 Ultra; Storage: Samsung 980 Pro, 1TB; Samsung 970 EVO, 1TB; Crucial MX500, 2TB; PSU: Corsair RM850x; Case: Lian Li Lancool II Mesh RGB, Black; Display(s): Primary: ASUS ROG Swift PG279QM (1440p 27" 240 Hz); Secondary: Acer Predator XB1 XB241H bmipr (1080p 24" 144 Hz, 165 Hz OC); Case Fans: 1x Lian Li ST120 RGB Fan, 3x stock RGB fans; Capture Card: Elgato HD60 Pro

 

翻生 (Resurrection): CPU: 2x Intel Xeon E5-2620 v2; Motherboard: ASUS Z9PR-D12 (C602 chipset) SSI-EEB; RAM: Crucial 32GB (8x4GB) DDR3 ECC RAM; Cooling Solution: 2x Cooler Master Hyper 212 EVO; GPU: ASRock Intel ARC A380 Challenger ITX; StorageCrucial MX500, 500GB; PSU: Super Flower Leadex III 750W; Case: Phanteks Enthoo Pro; Expansion Card: TP-Link Archer T4E AC1200 PCIe Wi-Fi Adapter Display(s): Dell P2214HB (1080p 22" 60 Hz)

 

壯麗 (Glorious): Mainboard: Framework Mainboard w/ Intel Core i5-1135G7; RAM: G.Skill Ripjaws 32GB (2x16GB) DDR4 SODIMM @3200MHz CL22; eGPU: Razer Core X eGPU Enclosure w/ (between GPUs at the moment); Storage: Samsung 970 EVO Plus, 1TB; Display(s): Internal Display: Framework Display; External Display: Acer (unknown model) (1080p, 21" 75 Hz)

Link to comment
Share on other sites

Link to post
Share on other sites

You can set the Windows partition as first boot device in the bios. However why now, change Grub? Change windows to the default option. I would also suggest you reduce the default time it allows you to make a selection. I know on my machine I have it set to 3 seconds to I don't have a 10 second delay to my boot time.

Link to comment
Share on other sites

Link to post
Share on other sites

12 minutes ago, OhioYJ said:

You can set the Windows partition as first boot device in the bios. However why now, change Grub? Change windows to the default option. I would also suggest you reduce the default time it allows you to make a selection. I know on my machine I have it set to 3 seconds to I don't have a 10 second delay to my boot time.

Would changing Windows to the default option skip GRUB outright or would it just select it after the 10 seconds?

 

I think I'd rather just skip GRUB outright because I get super bothered even by small skips. Is the GRUB itself part of the boot priority that gets set to the top when dual-boot is enabled? i haven't tried to use dual-boot in >10 years.

It's entirely possible that I misinterpreted/misread your topic and/or question. This happens more often than I care to admit. Apologies in advance.

 

珠江 (Pearl River): CPU: Intel i7-12700K (8p4e/20t); Motherboard: ASUS TUF Gaming Plus Z690 WiFi; RAM: G.Skill TridentZ RGB 32GB (2x16GB) DDR4 @3200MHz CL16; Cooling Solution: NZXT Kraken Z53 240mm AIO, w/ 2x Lian Li ST120 RGB Fans; GPU: EVGA Nvidia GeForce RTX 3080 10GB FTW3 Ultra; Storage: Samsung 980 Pro, 1TB; Samsung 970 EVO, 1TB; Crucial MX500, 2TB; PSU: Corsair RM850x; Case: Lian Li Lancool II Mesh RGB, Black; Display(s): Primary: ASUS ROG Swift PG279QM (1440p 27" 240 Hz); Secondary: Acer Predator XB1 XB241H bmipr (1080p 24" 144 Hz, 165 Hz OC); Case Fans: 1x Lian Li ST120 RGB Fan, 3x stock RGB fans; Capture Card: Elgato HD60 Pro

 

翻生 (Resurrection): CPU: 2x Intel Xeon E5-2620 v2; Motherboard: ASUS Z9PR-D12 (C602 chipset) SSI-EEB; RAM: Crucial 32GB (8x4GB) DDR3 ECC RAM; Cooling Solution: 2x Cooler Master Hyper 212 EVO; GPU: ASRock Intel ARC A380 Challenger ITX; StorageCrucial MX500, 500GB; PSU: Super Flower Leadex III 750W; Case: Phanteks Enthoo Pro; Expansion Card: TP-Link Archer T4E AC1200 PCIe Wi-Fi Adapter Display(s): Dell P2214HB (1080p 22" 60 Hz)

 

壯麗 (Glorious): Mainboard: Framework Mainboard w/ Intel Core i5-1135G7; RAM: G.Skill Ripjaws 32GB (2x16GB) DDR4 SODIMM @3200MHz CL22; eGPU: Razer Core X eGPU Enclosure w/ (between GPUs at the moment); Storage: Samsung 970 EVO Plus, 1TB; Display(s): Internal Display: Framework Display; External Display: Acer (unknown model) (1080p, 21" 75 Hz)

Link to comment
Share on other sites

Link to post
Share on other sites

4 minutes ago, CT854 said:

Would changing Windows to the default option skip GRUB outright or would it just select it after the 10 seconds?

Changing Windows to the default option in the Bios, skips Grub. If you modify Grub to use Windows as the default it will just select it after however many seconds you set it, that's why I also suggested you reduce this time, I use a 3 second delay. 3 seconds is enough time to choose something else (the timer does stop if you hit a key) but not enough time to be annoyingly long.

 

Personally if you aren't going to use Linux, you might as well just remove it. Going into the Bios all the time would annoy me more. However to each their own.

Link to comment
Share on other sites

Link to post
Share on other sites

If you don't like Grub you can just remove it from your Linux install but if you do you probably will have to go into BIOS every time you want to try Linux.

Link to comment
Share on other sites

Link to post
Share on other sites

7 hours ago, OhioYJ said:

Going into the Bios all the time would annoy me more. However to each their own.

 

3 hours ago, Ultraforce said:

but if you do you probably will have to go into BIOS every time you want to try Linux.

Yeah, this is the desired result for me, as strange as it may seem. Quite frankly I'd rather boot from BIOS every time I use Linux rather than wait 3 seconds for the GRUB screen to lapse when booting into Windows. Thanks!

It's entirely possible that I misinterpreted/misread your topic and/or question. This happens more often than I care to admit. Apologies in advance.

 

珠江 (Pearl River): CPU: Intel i7-12700K (8p4e/20t); Motherboard: ASUS TUF Gaming Plus Z690 WiFi; RAM: G.Skill TridentZ RGB 32GB (2x16GB) DDR4 @3200MHz CL16; Cooling Solution: NZXT Kraken Z53 240mm AIO, w/ 2x Lian Li ST120 RGB Fans; GPU: EVGA Nvidia GeForce RTX 3080 10GB FTW3 Ultra; Storage: Samsung 980 Pro, 1TB; Samsung 970 EVO, 1TB; Crucial MX500, 2TB; PSU: Corsair RM850x; Case: Lian Li Lancool II Mesh RGB, Black; Display(s): Primary: ASUS ROG Swift PG279QM (1440p 27" 240 Hz); Secondary: Acer Predator XB1 XB241H bmipr (1080p 24" 144 Hz, 165 Hz OC); Case Fans: 1x Lian Li ST120 RGB Fan, 3x stock RGB fans; Capture Card: Elgato HD60 Pro

 

翻生 (Resurrection): CPU: 2x Intel Xeon E5-2620 v2; Motherboard: ASUS Z9PR-D12 (C602 chipset) SSI-EEB; RAM: Crucial 32GB (8x4GB) DDR3 ECC RAM; Cooling Solution: 2x Cooler Master Hyper 212 EVO; GPU: ASRock Intel ARC A380 Challenger ITX; StorageCrucial MX500, 500GB; PSU: Super Flower Leadex III 750W; Case: Phanteks Enthoo Pro; Expansion Card: TP-Link Archer T4E AC1200 PCIe Wi-Fi Adapter Display(s): Dell P2214HB (1080p 22" 60 Hz)

 

壯麗 (Glorious): Mainboard: Framework Mainboard w/ Intel Core i5-1135G7; RAM: G.Skill Ripjaws 32GB (2x16GB) DDR4 SODIMM @3200MHz CL22; eGPU: Razer Core X eGPU Enclosure w/ (between GPUs at the moment); Storage: Samsung 970 EVO Plus, 1TB; Display(s): Internal Display: Framework Display; External Display: Acer (unknown model) (1080p, 21" 75 Hz)

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×